Unit Identification button and LED (for easy
in rack server identification)
6.
Six 1" Wide Ultra3 SCSI Hot Plug Hard
Drives OR Five 1" Hot Plug Hard Drive and one AIT or
20/40-GB DAT Hot Plug Tape Drive
7.
2U Form Factor
What's New
New DC Power Supply for the DL380 G2 (48V)
At A Glance
New Smart Array 5i Plus Controller & Battery-Backed
Write Cache (BBWC) Enabler bundle option kit
Setting a new standard for 2-way dense computing,
the new ProLiantDL380 is the first density-optimized server to provide
enterprise class availability and performance for demanding Internet
and business applications - all in a 2U form factor
Intel® Pentium® III FC-PGA2 1.40 GHz Processor
(dual capability) with 512-KB level 2 ECC cache
ServerWorks HE-SLChipset
Triple Peer PCI Architecture with 133-MHz Front Side
Bus
256-MB PC133-MHz Registered ECC SDRAM memory (2 x
1 Interleaved Memory), expandable to 6 GB or 4 GB with 2 GB online spare
memory
Three PCI expansion slots: Two HP 64-bit/66 MHz and
one standard 64-bit/33 MHz
Two Compaq NC3163 Fast Ethernet NICs Embedded 10/100
WOL (Wake On LAN)
Smart Array 5i Controller (integrated on system board)
Support for up to six 1" Wide Ultra3/Ultra320
SCSI hot plug hard drives or for five hot plug hard drives and one AIT
or 20/40-GB DAT hot plug tape drive
Internal hot plug capacity 880.8 GB standard (6 x
146.8 GB 1" HD)
400-Watt Hot Plug Power Supply and Hot Pluggable
Fans (optional redundancy for both)
Sliding rails and cable management arm for easy serviceability
and in-rack tool-less access to major components
Automatic Server Recovery (ASR), ROM Based Setup
Utility (RBSU), Compaq Insight Manager 7, Status LEDs including system
health and UID and SmartStart
Protected by HP Services, including a three-year,
Next Business Day, on-site limited Global warranty and extended Pre-Failure
Warranty, which covers processors, memory, and hard drives — Certain
restrictions and exclusions apply. Consult the HP Customer Support Center
at 1-800-345-1518 for details.
Insight Manager 7 helps
maximize system uptime and performance and reduces the cost of maintaining
the IT infrastructure by providing proactive notification of problems
before those problems result in costly downtime and reduced productivity.
Insight Manager 7 is easy to set up and provides rapid access to detailed
fault and performance information gathered by the Management Agents.
One-click access to the Integrated Lights-Out or Remote Insight Lights
Out Edition board allows systems administrators to take full graphical
control of ProLiant servers in remote locations or lights-out data
centers. Finally, Insight Manager 7 in concert with the Version Control
Agents and Version Control Repository Manager enables systems administrators
to version manage and update system software across groups of ProLiant
servers.
SmartStart
SmartStart is a tool that
simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please
visit the SmartStart Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart
5.10.
Management Agents
The Management Agents
form the foundation for HP's Intelligent Manageability strategy. They
provide direct, browser-based access to in-depth instrumentation built
into HP servers, workstations, desktops, and portables, and send alerts
to Insight Manager 7 and other enterprise management applications
in case of subsystem or environmental failures. For additional information
about the Management Agents and other management products from HP,
please visit the management Web site at http://www.hp.com/servers/manage.
ActiveUpdate
Active Update is a web-based
application that keeps IT managers directly connected to HP for proactive
notification and delivery of the latest software updates.
ROMPaq,
support software, and
configuration utilities
The latest software, drivers,
and firmware fully optimized and tested for your ProLiant server and
options.
Survey Utility and diagnostics
utilities
The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP and at
your fingertips.
Optional
ProLiant Essentials Value Packs
Optional software offerings
that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server deployment and provisioning, enabling companies to quickly and easily adapt to changing business demands.
Workload Management Pack – provides easier management of
complex environments, improving overall server utilization and
enabling Windows® 2000 customers for the first time to confidently
deploy multiple applications on a single multiprocessor ProLiant
Server.
Performance Management Pack – a performance management
solution that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better
utilize their valuable resources.
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials NOTE: These Web sites are available in English only.
Industry Standard
Compliance
ACPI 1.0b Compliant
PCI-X and PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 1.1
Manageability
Insight Manager 7
Redundant ROM
Remote Flash ROM
Management Agent
Automatic Server Recovery (ASR)
Compaq Remote Insight Lights-Out Edition (optional)
Integrated Management Log
Drive Parameter Tracking (with Smart Array Controllers)
Dynamic Sector Repairing (with Smart Array Controllers)
Hot Spare Boot
(NOTE: Upon
the event of a failed processor or VRM in a multi-processing environment,
the system will automatically reboot and use the remaining good processor(s).)
Pre-Failure Warranty (covers processors, hard drives and memory)
Security
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Serial interface control
Administrator's password
Disk configuration lock
Server Power Cords
One Lowline power cord ships
standard
Power Supply
400 Watt, CE Mark Compliant
Optional Hot Plug Redundant Power Supply Capability
System Fans
5 fans ship standard. 8 total
supported internally
NOTE: The additional
3 fans are available via Option Kit (PN 225012-B21).
Microsoft Windows NT®
erver Microsoft Windows 2000 Novell NetWare SCO UnixWare® LINUX
(Red Hat, SuSE, TurboLinux Server, Caldera eServer) Sun Solaris Intel Platform
Edition
NOTE:
These Web sites are available in English only.
Rack
Airflow Requirements
Rack
9000 and 10000 series Cabinets The increasing power of new high-performance
processor technology requires increased cooling efficiency for rack-mounted servers.
The Compaq 9000 Series Rack and the new 10000 Series Racks provides enhanced airflow
for maximum cooling, allowing these racks to be fully loaded with servers using
the latest processors.
Rack 7000 series Cabinets When installing
a server with processors running at speeds of 550 MHz or greater in Compaq Rack
7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the
new processor technology requires the installation of Compaq’s new High Airflow
Rack Door Inserts ( 327281-B21 (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U))
to promote enhanced airflow for maximum cooling.
CAUTION:
If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server
rack includes closing front and rear doors, you must allow 830 square inches (5,350
sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side:
The clearance between the installed rack component and the side panels of the
rack must be a minimum of 2.75 inches (7 cm).
CAUTION:
Always use blanking panels to fill all remaining empty front panel U-spaces
in the rack. This arrangement ensures proper airflow. Using a rack without blanking
panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide
or the Documentation CD provided with the server, or to the server documentation
located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html.
Service
and Support
HP Services provides
a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard
drives, memory and processors) fully supported by a worldwide network of resellers
and service providers. HP technical assistance is available 7x24, toll free in
the United States and Canada. Telephone support services may be covered under
warranty or available for an additional fee. NOTE:
Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
A full range of HP Care Pack packaged hardware and software services:
Installation and start up
Extended coverage hours and enhanced response
times
NOTE:
This option kit (PN 264030-xx1) supports the ProLiant DL380 G2 only.
Smart Array 5i
Plus Controller & BBWC Enabler Bundle (Japan)
264030-291
NOTE:
This option kit (PN 264030-xx1) supports the ProLiant DL380 G2 only.
2-Post Telco Rail
Kit
228892-B21
Third Party, 4-Post
Sliding Rail Kit
228894-B21
Compaq Hot Plug
Redundant Power Supply Module
225011-001
Compaq Hot Plug
Redundant Power Supply Module (Australia)
225011-011
Compaq Hot Plug
Redundant Power Supply Module (Int'l)
225011-021
Compaq Hot Plug
Redundant Power Supply Module (UK)
225011-031
Compaq Hot Plug
Redundant Power Supply Module (Japan)
225011-291
Hot Plug Redundant
Fan Option Kit
225012-B21
NOTE:
Hot Plug Redundant Fan Option Kit (PN 225012-B21) contains three fans per
kit
DC Power Supply
for the DL380 G2 (48V)
268290-B21
NOTE:
The ProLiant DL380 G2 ships standard with a 100-240 volt auto-switching
AC power supply. Each 48 volt DC option kit (PN 268290-B21) contains one
power supply. Therefore, to convert to redundant DC power supplies, two
must be purchased
ProLiant
Essentials
Value Pack Software
Rapid Deployment
Pack, 1 User, V1.x NOTE: This license allows 1 server
to be managed and deployed via the Deployment Server.
267196-B21
Rapid Deployment
Pack, 1 User, V1.x (Japan) NOTE: This license allows 1 server
to be managed and deployed via the Deployment Server.
267196-291
Rapid Deployment
Pack, 10 Users, V1.x NOTE: This license allows 10 servers
to be managed and deployed via the Deployment Server.
269817-B21
Rapid Deployment
Pack, 10 Users, V1.x (Japan) NOTE: TThis license allows 10 servers
to be managed and deployed via the Deployment Server.
ProLiant Essentials
Performance Management Pack v2.0, Single License
306696-B21
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE:
These Web sites are available in English only.
Software
HP digital asset protection
302316-001
Software – Secured Solutions
InterScan/Immunix Secured Solution
for hp ProLiant servers
307039-B21
NetServer to ProLiant
integrations services
HP NetServer to ProLiant
integration and assessment service
304164-002
NOTE:
HP identifies current levels of NetServer support, services, and management.
This service helps maximize customer’s ability to add ProLiant platforms
into their current environment.
HP TopTools to Insight
Manager 7 installation and startup service
304163-002
NOTE: Provides on-site
review, installation and configuration services for Insight Manager 7. HP
will also re-create, as closely as possible, the views and reports from
the customer’s current TopTools configuration. This service assures a smooth
transition to the ProLiant Essentials software.
HP NetServer to ProLiant
Essentials Rapid Deployment Pack installation and startup service
304162-002
NOTE: Install and configure
Rapid Deployment Pack in a test environment, then deploy a server image
to a maximum of 250 systems in the production environment. This service
helps to assure successful system deployment.
NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support
U320 transfer rates.
NOTE: Any NC31XX,
NC61XX or NC71XX NIC can be used for redundancy with the embedded NC3163
Network Controller.
DC Power Supply
DC Power Supply for the DL380 (48V)
268290-B21
NOTE: The ProLiant DL380 G2 ships standard
with a 100-240 volt auto-switching AC power supply. Each 48 volt DC option
kit (PN 268290-B21) contains one power supply. Therefore, to convert to
redundant DC power supplies, two must be purchased.
Redundant Options
Compaq Hot Plug Redundant Power Supply Module
225011-001
Compaq Hot Plug Redundant Power Supply Module (Australia)
225011-011
Compaq Hot Plug Redundant Power Supply Module (Int'l)
225011-021
Compaq Hot Plug Redundant Power
Supply Module (UK)
225011-031
Compaq Hot Plug Redundant Power
Supply Module (Japan)
225011-291
Hot Plug Redundant Fan Option
Kit
225012-B21
Hot Plug AC Redundant Power Supply
Module (NEMA cord) (NA)
313054-001
Hot Plug AC Redundant Power Supply
Module (IEC cord) (WW)
NOTE: The 3U
Rackmount Kit (PN 274338-B21) can support up to (2) full-height or (4) half-height
tape drives and compatible with multiple internal Single-Ended and LVD SCSI Tape
Drives including the 12/24-GB DAT, 20/40-GB DAT, 20/40-GB DAT DDS-4 8 Cassette
Autoloader, AIT 35-GB LVD, AIT 50 GB, AIT 100 GB, 20/40-GB DLT, 40/80-GB DLT,
SDLT 110/220-GB, SDLT 160/320-GB, Ultrium 230, and Ultrium 460 Tape Drives.
5U
Rackmount Kit
274339-B21
NOTE: The 5U
Rackmount Kit (PN 274339-B21) can support up to (4) full-height tape drives and
is compatible with all HP internal DLT/SDLT/Ultrium tape drives including the
20/40-GB DLT, 35/70-GB DLT, 40/80-GB DLT, SDLT 110/220-GB, SDLT 160/320, Ultrium
230, and Ultrium 460 tape drives.
NOTE: Options
include controller, solution kits, ACS. MA8000/EMA12000 includes controller
shelf, drive shelves and cabinet. Packaging upgrade to RA8000/ESA12000.
NOTE: Models include:
Dual HSG80 controllers in each Model 2200 enclosure (2 pairs per single
bus configuration, 4 pairs per dual bus configuration) with 1GB cache per
controller pair, and 12 14-bay drive enclosures with redundant power supplies.
Configure-to-Order (CTO) builds are available. Options include ACS, platform
kits and software by HP.
Rack-Mountable PDU’s – 1U/0U
(Up to 12 Outlets) NOTE: 0U mounting brackets shipped
with
the unit (separate option kit for 1U mounting).
Compaq Power Distribution Unit-16A (200-240V) (WW)
207590-B21
NOTE: The 16A
PDU also connects to the high volt models of the UPS R3000 XR (need cable
PN 340653-001 (NA)) and the UPS R6000 models. Cable PN 340653-001 required
if connecting to UPS R3000 XR ( 192186-002 NA-High Volt model only).
Compaq Power Distribution Unit-32A (200-240V) (Int’l)
207590-B31
Compaq Power Distribution Unit-40A (200-240V) (WW)
NOTE:
This PDU has a detachable input power cord and allows for adaptability to
country specific power requirements. This model may also be used with the
high volt UPSs R3000 XR and R6000 For North America, need to order cable
PN 340653-001.
NOTE: This kit
allows you to mount the Modular PDUs in racks other than the 9000/10000
Series racks (any racks using the standard 19" rail). For more details
please refer the Modular PDU QuickSpecs.
4.5' IEC C 13 to IEC C14 PDU Jumper
Cable (1 per pack)
142257-006
4.5' IEC C 13 to IEC C14 PDU Jumper Cable (15 per pack)
NOTE: -B21 (pallet) used to ship empty racks
shipped on a truck -B22 (shock pallet) used to ship racks with equipment installed
(by custom systems, VARs and Channels) -B23 (crated) used for air shipments
of empty racks
NOTE: It
is mandatory to use a shock pallet in order to ship racks with equipment installed.
Not all Compaq equipment is qualified to be shipped in the Rack 10000 series
NOTE:
–B21 (pallet) used to ship empty racks shipped on a truck –B22 (shock
pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels) –B23 (crated) used for air shipments of empty racks
NOTE:
This kit can be used to connect 9000 and 10000 series racks of the same U
height together. Kit contents include hardware for connecting racks and a panel
to cover the 100mm gap at the rear of the two racks.
NOTE:
The Rack Blanking Panels (PN 189453-B21) contains 10 each of (3U).
Rack Blanking Panels (4U)
189453-B24
NOTE:
The Rack Blanking Panels (PN 189453-B21) contains 10 each of (4U).
Rack Blanking Panels (5U)
189453-B25
NOTE:
The Rack Blanking Panels (PN 189453-B21) contains 10 each of (5U).
9000/10000 Series Offset Baying Kit (42U)
248931-B21
NOTE:
This kit can be used to connect 9000 and 10000 series racks of the same U
height together. Kit contents include hardware for connecting racks and a panel
to cover the 100mm gap at the rear of the two racks.
NOTE:
Input Device Adjustable Rails (287139-B21) are for use with the TFT5110R,
TFT5600RKM and integrated keyboard/drawer which is used in mounting into third
party racks.
NOTE:
Input Device Adjustable Rails ( 287138-B21) are for use ONLY with the TFT5110R,
TFT5600RKM and integrated keyboard/drawer which is used in mounting into third
party racks.
Service
and Support Offerings (HP Care Pack Services)
Hardware Services 4-Hour On-site Service
4-Hour On-site Service, 9-Hour x 5-Day Coverage, 3 Years (6-3 Part Number for
US)
162658-002
4-Hour On-site Service, 9-Hour
x 5-Day Coverage, 3 Years (6-3 Part Number for Canada)
162658-122
4-Hour On-site Service, 9-Hour
x 5-Day Coverage, 3 Years (6-3 Part Number for EMEA)
324417-002
4-Hour On-site Service, 24-Hour
x 7-Day Coverage, 3 Years (6-3 Part Number for US)
162657-002
4-Hour On-site Service, 24-Hour
x 7-Day Coverage, 3 Years (6-3 Part Number for Canada)
162657-122
4-Hour On-site Service, 24-Hour
x 7-Day Coverage, 3 Years (6-3 Part Number for EMEA)
376912-022
Installation &
Start-up Services
Hardware Installation (6-3 Part Number for US)
401792-002
Hardware Installation (6-3 Part
Number for Canada)
401792-122
Hardware Installation (6-3 Part
Number for EMEA)
Quote
Pre-installation planning; unpack
equipment, install most current Compaq HW options internal to server at same time
of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Win NT Operating System plus up
to 1 day start-up activity, configure print & network access services, and
orientation (6-3 Part Number for U.S.)
240014-002
Pre-installation planning; unpack
equipment, install most current Compaq HW options internal to server at same time
of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Novell NetWare Operating System
plus up to 1 day start-up activity, configure print & network access services,
and orientation (6-3 Part Number for U.S.)
240009-002
Server Installation and Set-Up
(Installation of the server, installation of the appropriate service tools, check
to ensure device SW and firmware is loaded and installation of the operating system
software(6-3 Part Number for EMEA)
204563-022
Care Pack
Priority Services for ProLiant Servers – Priority Level
9 x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software
Support 2-hr response for Windows NT, Windows 2000, Professional, Server or Advanced
Server Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239929-002
9 x 5 HW, 4-hr response, Next
Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for Novell
NetWare Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239969-002
5 x 9 4-hour H/W, 5 x 9 2-hour
O/S (NT & NetWare), Three Years (6-3 Part Number for Canada)
155324-122
5 x 9 4-hour H/W, 5 x 9 2-hour O/S (NT & NetWare), Three Years (6-3 Part Number
for EMEA)
179835-022
CarePaq
Priority Services for ProLiant Servers – Priority 24 Level
24 x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support,
2-hr response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239931-002
24 x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr
response for Novell NetWare Operating System, Next Available Specialist (6-3 Part
Number for U.S.)
239971-002
7 x 24 4-hour H/W, 7 x 24 2-hour
O/S (NT & NetWare), Three years (6-3 Part Number for EMEA)
179840-022
CarePaq
Priority Services for ProLiant Servers – Priority Plus Level
7 x 24 4-hour H/W, 7 x 24
1-hour O/S (NT & NetWare), SPS account review, Three Years (6-3 Part Number
for Canada)
155332-122
CarePaq
Priority Services for ProLiant Servers – Priority Silver
24 x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after
hours for Windows NT, Windows 2000, Professional, Server or Advanced Server Operating
System, Technical Account Manager, Technical Newsletter, SW activity review, proactive
patch notification, 1 System Healthcheck per year (6-3 Part Number for U.S.)
239933-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Silver Subsequent System Support for Windows NT, Windows 2000,
Professional, Server or Advanced Server Operating System (6-3 Part Number for
U.S.)
239935-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday – Friday,
8AM – 5PM local time, 2-hr response after hours for Novell NetWare Operating
System, Technical Account Manager, Technical Newsletter, SW activity review (6-3
Part Number for U.S.)
239973-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Silver Subsequent System Support for Novell NetWare Operating
System (6-3 Part Number for U.S.)
239975-002
CarePaq
Priority Services for ProLiant Servers – Priority Premier Level
7 x 24 2-hour H/W, 7 x 24 1-hour O/S (NT & NetWare), SPS Account Review, Proactive
Management Review, named S/w rep, Three Years (6-3 Part Number for Canada)
155336-122
CarePaq
Priority Services for ProLiant Servers – Priority Executive Premier Level
7 x 24 2-hour H/W, 7 x 24 30-minute O/S (NT & NetWare), SPS Account Review,
Proactive Management Review, named S/w rep, Three Years (6-3 Part Number for Canada)
256-MB PC133-MHz Registered ECC SDRAM installed (2 x
128-MB SDRAM)
Standard Memory Plus Optional Memory
Up to 4,352-MB memory is available with the optional installation
of PC133-MHz Registered ECC SDRAM memory kits.
Standard Memory Replaced with Optional Memory
Up to 6,144-MB of memory is available with the removal
of the standard 256-MB of memory and the optional installation of PC133-MHz
Registered ECC SDRAM memory kits.
NOTE: Chart does not represent all possible
configurations.
Memory
Slot
1
2
3
4
5
6
Standard
256 MB
128 MB
Empty
Empty
128 MB
Empty
Empty
Optional
4,352 MB
128 MB
1024 MB
1024 MB
128 MB
1024 MB
1024 MB
Maximum
6,144 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
NOTE: slots 3 and
6 can be configured as online spare memory through RBSU.
Following are memory options available from Compaq:
NOTE:
All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
U320 drives require an optional U320 Smart Array Controller or U320 SCSI
HBA to support U320 transfer rates.
External Storage
Quantity
Supported
Position
Supported
Controller
StorageWorks Enclosure 4300 Family (supports Ultra2/Ultra3 1" drives
only)
Up to 2 Processors, 6 Memory Slots, 6 Hard
Drives, 3 PCI Slots, and 2 Hot Plug Power Supplies
Nominal Input Voltage (Vrms)
100
115
208
220
230
240
Fully Loaded System Input Wattage (W)
431
415
403
398
398
398
Fully Loaded System Input Current (A rms)
4.4
3.8
2.0
1.8
1.8
1.7
Fully Loaded System Thermal (BTU- Hr)
1435
1415
1376
1357
1357
1357
Fully Loaded System VA (Volt-Amp)
443
437
412
406
406
406
System Leakage with all power supplies loaded (mA)
0.63
0.72
1.30
1.38
1.44
1.50
System Inrush Current with all power supplies loaded (A)
100
100
100
100
100
100
Power cord requirements
Nema 5-15P to IEC320-C13
Option no./Spare no.: See Chart below
IEC320-C13 to IEC320-C14
Option no./Spare no.: 142257-002/142258-B21
NOTES:
* To review typical system power ratings use the Active Answers Power
Calculator which is available via the online tool located at URL: http://activeanswers.compaq.com/aaconfiguratorcode/
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: DL380 G2
- Click on: "Power Calculator" link. (You may
need to scroll down to see it)
US Site
DL Quickspecs
Search:
327281-B21
© 2012 Canada PartsDirect