5. Six Hot Plug Drive Bays (shown above) or Four
Non Hot Plug SCSI Drive Bays (not shown)
6. Six Expansion Slots (four PCI-X, two PCI-Express)
7. Four DIMM sockets for up to 8GB of memory
8. System Fan (an optional redundant system
fan is available)
9. Power Supply NOTE: In hot plug models,
an optional 2nd power supply is available for hot-plug 1+1 redundancy
At A Glance
Intel Xeon 3.0 GHz, 3.2 GHz,
or 3.4 GHz processors (dual processor capability) with 1MB level 2 cache
standard. Processors include support for Hyper-Threading and Extended
Memory 64 Technology (EM64T)
Intel® E7520 chipset
800-MHz Front Side Bus
Integrated Dual Channel Ultra320 SCSI Adapter
Smart Array 641 Controller (standard in Array Models
only)
NC7761 PCI Gigabit NIC (embedded)
Up to 1 GB of PC2700 DDR SDRAM with Advanced ECC
capabilities (Expandable to 8 GB)
Six expansion slots: one 64-bit/133-MHz PCI-X, two
64-bit/100-MHz PCI-X, one 64-bit/66-MHz PCI-X, one x4 PCI-Express, and
one x8 PCI-Express
New HP Power Regulator for ProLiant delivering server
level, policy based power management with industry leading energy efficiency
and savings on system power and cooling costs
Three USB ports: 1
front, 1 internal, 1 rear
Support for Ultra320 SCSI
hard drives (six hot plug or four non-hot plug drives supported standard,
model dependent)
Internalstorage capacity
of up to 1.8TB; 2.4TB with optional 2-bay hot plug SCSI drive
725W Hot-Plug Power Supply (standard, most models);
optional 725W Hot-Pluggable Redundant Power Supply (1+1) available.
Non hot plug SCSI models include a 460W non-hot plug power supply.
Tool-free chassis entry and component access
Support for ROM based setup utility (RBSU) and redundant
ROM
Systems Insight Manager, SmartStart, and Automatic
Server Recovery 2 (ASR-2) included
Protected by HP Services and a worldwide network
of resellers and service providers. Three-year Next Business Day, on-site
limited global warranty. Certain restrictions and exclusions apply.
Pre-Failure Notification on processors, memory, and SCSI hard drives.
In HP ProLiant
ML350 G4 Array Models, the Smart Array 641 is installed in Slot 3.
4
64-bit/100MHz PCI-X
12.28”
9
1
no
3.3 Volt
5
64-bit/133MHz PCI-X
12.28”
6
1
no
3.3 Volt
6
64-bit/66MHz PCI-X
12.28”
2
2
no
3.3 Volt
*NOTE:
Bus number listed reflects the default bus assignment. Inserting cards with
PCI bridges may alter the actual bus assignment number.
**NOTE: Slots are enumerated differently based on operating system.
Microsoft's operating systems enumerate from lowest to highest Device ID
by bus (starting with the lowest bus). NOTE: All slots can accept universal keyed PCI cards
Storage Controller
Integrated Dual Channel Ultra320
SCSI Adapter
Smart Array 641 Controller (Standard
in Array Models only)
Storage
Diskette Drives
1.44MB Diskette Drive
Optical Drive
48x IDE CD-ROM Drive
Hard Drives
36GB 15,000 rpm hard drive included
in non hot plug SCSI models only
Maximum Internal
Storage
Hot Plug SCSI
2.4TB
6 x 300GB with standard drive
cage +
2 x 300GB with optional ML3xx Two Bay Hot Plug SCSI Drive Cage
Non hot plug SCSI
888GB
4 x 72GB with standard drive
cage +
2 x 300GB with optional ML3xx Two Bay Hot Plug SCSI Drive Cage
External Storage
Two external SCSI port knockouts available; optional Internal-to-External
SCSI Cable Option Kit required for external connections
HD68 Internal to External SCSI Cable Option Kit PN 159547-B22
VHDCI Internal to External SCSI Cable Option Kit PN 333370-B21
HP Systems Insight Manager
(HP SIM) helps maximize system uptime and performance and reduce system
maintenance costs by providing proactive notification of problems
before those problems result in unplanned downtime or reduced productivity.
For more information on HP SIM visit http://www.hp.com/go/hpsim.
Management Agents
The Management Agents
provide direct, browser-based access to in-depth instrumentation built
into HP servers, workstations, desktops, or portables, and send alerts
to Systems Insight Manager or other enterprise management applications
in case of subsystem or environmental failures. For additional information
about the Management Agents and other management products from HP,
visit http://www.hp.com/servers/manage.
SmartStart
SmartStart simplifies
server setup by providing a quick, easy way to deploy reliable and
consistent server configurations. For more information, please visit
the SmartStart Web site at http://www.hp.com/servers/manage.
Minimum SmartStart version supported: 7.1
Latest SmartStart version supported: 7.2
Subscriber's Choice
Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription
service that provides automatic delivery of software and driver change
notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive alerts on updates as they become
available.
ROMPaq, support software, and
configuration utilities
The latest software, drivers,
and firmware fully optimized and tested for your ProLiant server and
options
Available in SmartStart or downloadable from the Software and Drivers
download pages at http://www.hp.com/go/support.
Insight Diagnostics Online
Edition
The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP at your
fingertips
Available in SmartStart.
Optional ProLiant Essentials
Value Packs
Optional software offerings that extend the functionality of an
Adaptive Infrastructure to address specific business problems and
needs:
Rapid Deployment Pack - an automated solution for multi-server
deployment and provisioning, enabling companies to quickly and
easily adapt to changing business demands.
Workload Management Pack - provides easier management of complex
environments, improving overall server utilization and enabling
Windows® 2000 customers for the first time to confidently
deploy multiple applications on a single multiprocessor ProLiant
Server.
Integrated Lights-Out Advanced Pack - upgrades the Integrated
Lights-Out processor to full virtual presence and control with
graphical console and virtual media.
Performance Management Pack - a performance management solution
that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better
utilize their valuable resources.
Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route
based on network conditions, plus it provides an extra layer of
protection. The virus throttle feature of the solution slows the
propagation of fast spreading virus
Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well
operating system configurations that can be exploited by viruses,
worms, and other blended threats
Virtual Machine Management Pack - provides central management
and control of virtual machines from Microsoft and VMware. Integrated
approach provides the ability to manage both physical and virtual
resources from a single management console.
Server Migration Pack - The Server Migration Pack automates
the manual processes required for migrating servers between physical
or virtual platforms (P2V, V2P, and V2V).
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
Industry Standard Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
PCI-X 1.0 Compliant
Novell Certified
Microsoft® Logo certifications
USB 2.0
Availability
Optional Redundant System Fan
Optional Hot Plug, Redundant Power supply (most models)
Remote Management
Remote Insight Lights-Out Edition
II (optional)
Management
HP Systems Insight Manager
SmartStart
Redundant ROM
System Firmware Update
ROMPaq
ProLiant RBSU (ROM-Based Setup Utility)
Automatic Server Recovery-2 (ASR-2)
Dynamic Sector Repairing (with Smart Array Controller)
Drive Parameter Tracking (with Smart Array Controller)
Pre-Failure Warranty (covers processors, memory and SCSI hard drives)
Security
Power-on password
Setup password
Diskette boot control
Parallel and serial interface control
Disk configuration lock
Power switch security
Server Power Cords
Tower models ship standard with
a 12' country specific, lowline NEMA power cord.
Rack models ship standard with a 10' IEC cable. Rack models for some countries
also include a 12' NEMA cord.
Most redundant power supply options ship with a 12' country specific power
cord. The one exception is the IEC redundant power supply (P/N 358352-B21)
which ships with a 10' IEC cable only.
725 Watt, Power Factor Correction
(PFC), Hot Plug 100 to 240 VAC Rated Input Voltage (Auto-sensing), CE Mark
Compliant
Optional 2nd power supply for hot-pluggable 1 + 1 redundancy.
Non hot plug models
460 Watt, Power Factor Correction
(PFC), Non hot plug 100 to 240 VAC Rated Input Voltage (Auto-sensing), CE
Mark Compliant
System Fans
1 fan ships standard, 2 fans
total supported (does not include power supply or processor heatsink fans)
Microsoft Windows Server 2003
Microsoft Small Business Server 2003
Microsoft Windows 2000 Server and Advanced Server
Novell NetWare
Novell NetWare Small Business Suite
LINUX (Red Hat, SuSE, and UnitedLinux)
VMware Virtualization Software
Support for all 2-post Telco
racks requires the use of the HP ProLiant ML350 G4 rack kit and an additional
option kit from Rack Solutions. http://www.racksolutions.com/hp.
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple
configuration, racking, installation, complex configuration and design services as well
as individual factory services, such as image loading, asset tagging, and
custom packaging. HP products supported through Factory Express include a wide
array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant
Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000,
VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to http://www.hp.com/go/factory-express.
This product is covered by a
global limited warranty and supported by HP Services and a worldwide network
of resellers and service providers. Hardware diagnostic support and repair
is available for three years from date of purchase. Support for software
and initial setup is available for 90 days from date of purchase. Additional
support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack
services or customized service agreements.
NOTE: Limited warranty includes 3 year
parts, 3 year labor, 3-year on-site support.
The warranty is fully supported by HP Services and a worldwide network
of resellers and service providers. In addition, 90-day software telephone
support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack
services.
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux,
ProLiant Essentials and VMWare-based IT solutions helping to deliver
high level of application availability. Response times range from 30
mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server, purchased at the same time or afterward, internal
to the enclosure, as well as 22" and smaller external monitors and
tower UPS options up to 3kVA; these items will be covered at the same
service level and for the same coverage period as the server. Coverage
of UPS Battery is not included, standard warranty terms & conditions
apply. For servers or storage systems installed within a rack, service
also covers all HP qualified rack options installed within the same rack.
NOTE: For more information on HP Care
Pack services, contact any of our worldwide sales offices or resellers
or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information
on HP Services offerings, customers and resellers, please visit us at:
http://www.hp.com/hps
Hot Plug Redundant
Power Supply Option Kit (NA, LA)
358352-001
Hot Plug Redundant
Power Supply Option Kit (AUST)
358352-011
Hot Plug Redundant
Power Supply Option Kit (EURO)
358352-021
Hot Plug Redundant
Power Supply Option Kit (UK)
358352-031
Hot Plug Redundant
Power Supply Option Kit (Japan)
358352-291
Hot Plug Redundant
Power Supply Option Kit (IEC) NOTE: PN 358352-B21 contains the
redundant power supply with an IEC power cable. Purchase this kit only when
connecting to a PDU or UPS that supports IEC cables. All other kits contain
country specific power cables.
ProLiant Essentials
Integrated Lights-Out Advanced Pack, 1 server Featuring:
sophisticated virtual administration features for ultimate control of servers
in the data centers and remote sites.
ProLiant Essentials
Intelligent Networking Pack - Windows Edition, Single Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
ProLiant Essentials
Performance Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key, HP Management
CD and documentation. NOTE: The most recent version of the software can always be downloaded
at http://www.hp.com/products/pmp.
ProLiant Essentials
Virtual Machine Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
372214-B21
ProLiant
Essentials Server Migration Pack, Single-Migration License NOTE: Contains one license, enabling 1 server migration, with a unique
license activation key and documentation. NOTE: This license allows 1 server to be migrated from a physical
server to a virtual machine. Or this license can be used to migrate a virtual
machine from one virtualization layer i.e. VMware GSX to a different virtualization
layer such as VMware ESX or Microsoft Virtual Server 2005.
ProLiant Essentials
Vulnerability and Patch Management Pack
ProLiant Essentials
Vulnerability and Patch Management Pack, Single-Server License NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
NOTE: The HP ProLiant
ML350 G4 requires interleaved memory configurations when more than one DIMM
is installed. Base models ship standard with a single DIMM. To upgrade system
memory, DIMMs must be installed in identical pairs. NOTE: Each SDRAM Memory kit contains one (1) DIMM.
ML3xx Two Bay Hot Plug SCSI Drive
Cage NOTE: The drive cage option kit (PN
244059-B21) has one 1" drive bay and one 1.6" drive bay. It installs
in two removable media bays.
CD-RW/DVD-ROM Combo Drive Option
Kit NOTE: The DVD-ROM drive is supported
in either the CD-ROM bay or a removable media bay. If placed in a removable
media bay, it requires the 2-Device IDE cable (PN 305381-B21).
NOTE: A minimum
of 1 GB of memory per port is required for NC370x adapters, with a maximum
of two NC370x ports permitted in a server.
NOTE: NC61XX,
NC71XX, NC77XX, or NC1020 network adapter (NIC) can be used for redundancy
with the embedded NC7761 NIC. When either the embedded NC7761 or the NC1020
is teamed with other HP Ethernet adapters, Jumbo Frames and LSO features
are automatically disabled.
HP StorageWorks Ultrium
448 Internal Tape Drive (Carbonite)
DW016A
Internal,
Rack-Mount, and Array Module DAT Drives
HP StorageWorks DAT 72 SCSI
Internal Tape Drive (Carbon)
Q1522B
HP StorageWorks 1U Rack-mount
kit with one DAT 72 (Carbon) NOTE: Single drive installed
in a 1U Rack-mount kit.
A7443A
Rack-Mount
Tape Drive Enclosures
HP StorageWorks 1U Rack-Mount
Kit NOTE: The 1U Rack-mount Kit
can support up to (2) half-height tape drives and compatible with
multiple Single-Ended and LVD SCSI tape drives including the DAT 24,
DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232 and
Ultrium 448 tape drives.
NOTE: Please reference
the 1/8 Tape Autoloader QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create
a complete solution; reference current compatibility information at http://www.hp.com/go/ebs
Tape Libraries
HP StorageWorks MSL2024 Tape
Library
HP StorageWorks MSL2024 1 Ultrium
960 Drive Library
NOTE: Please reference
the MSL2024
and MSL6000 Tape Library QuickSpecs at http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at http://www.hp.com/go/ebs
NOTE:
Please reference the Ultra Density Optical Jukebox QuickSpecs at http://www.hp.com/go/optical
for additional information needed to create a complete solution
HP Data Protector Express Software
HP DP Express Backup Server Upgrade for ProLiant
Software
AA966A
HP DP Express Package for Microsoft Small
Business Server
NOTE: Please see
the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options
and configuration information at: http://www.hp.com/go/MSA1500cs
HP 22.1 kVA S2316 Monitored PDU-
dual input, 3-phase, 16A (INTL)
370963-B31
HP 11 kVA S 1316 Monitored PDU-
single input, 3-phase, 16A (INTL)
370964-B31
HP 14.7 kVA S2132 Monitored PDU-
dual input, 1-phase, 32A (INTL)
370965-B31
HP 7.4 kVA S1132 Monitored PDU-
single input, 1-phase, 32A (INTL)
370966-B31
Modular PDUs
1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets shipped
with
the unit (optimized for 10000 and 9000 series racks).
HP Modular Power Distribution
Units (mPDU), Low Volt Model, 24A (100-127 VAC) (NA, Japan) NOTE: This mPDU ( 252663-D71) may
also be used to connect the low volt model of the UPS R3000 XR.
HP Modular Power Distribution
Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW) NOTE: This PDU has a detachable input
power cord and allows for adaptability to country specific power requirements.
This model may also be used with the high volt UPSs R3000 XR and R6000 For
North America, need to order cable PN 340653-001.
ProLiant ML3xx Internal to External
SCSI Cable Option Kit (HD68)
159547-B22
ProLiant ML3xx
Internal to External SCSI Cable Option Kit (VHDCI)
333370-B21
NOTE:
The
ProLiant ML3xx Internal to External SCSI Cable Option Kits (PN 159547-B21
and 333370-B21) are supported by the HP ProLiant ML330, HP ProLiant ML350,
and HP ProLiant ML370 products.
Rack Conversion Kit
ProLiant ML350 G4 Tower to Rack
Conversion Kit
358350-B21
Rack Adapter Kit NOTE: This kit allows HP rack servers
to fit in racks that are 24" wide.
332815-B21
Shipping Kit for Round Hole Racks NOTE: This kit is required if the
server will be configured and shipped within a round hole rack.
NOTE: xxxxxx-B21
(pallet) used to ship empty racks shipped on a truck. -B22 (shock pallet)
used to ship racks with equipment installed (by custom systems, VARs and
Channels). xxxxxx-B23 (crated) used for air shipments of empty racks.
NOTE: It is mandatory
to use a shock pallet in order to ship racks with equipment installed. Not
all Compaq equipment is qualified to be shipped in the Rack 10000 series.
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: http://www.hp.com/go/kvm.
HP 1x 4 USB/PS2 KVM Switch, TT
(NA/JPN)
371301-D71
HP 1x 4 USB/PS2 KVM Switch, TT
(AU/NZ)
371301-011
HP 1x 4 USB/PS2 KVM Switch, TT
(UK)
371301-031
HP 1x 4 USB/PS2 KVM Switch, TT
(EU)
371301-A21
HP 1x 4 USB/PS2 KVM Switch, RM
(ALL)
371302-B21
HP PS2 KVM Cable with audio, 6',
2-pack
371730-B21
HP USB KVM Cable with audio, 6',
2-pack
371729-B21
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
Service and Support
Offerings(HP Care Pack Services)
Hardware Services
On-site Service
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years (Electronic)
U4512E
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years (Electronic)
U4513E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years (Electronic)
U4514E
O/S and Hardware Installation
Hardware Installation (Electronic)
U4522E
Installation & Start-Up
of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays. (Electronic)
U4523E
Support Plus
Onsite HW support, 8am-9pm,
M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays.
(Electronic)
U4524E
Support Plus 24
Onsite HW support 24x7,
4hr response and Microsoft O/S SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
U4525E
Onsite HW support 24x7,
4hr response and SuSE Linux SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time incl. HP holidays, Electronic
U6308E
Onsite HW support 24x7,
4hr response and Red Hat ES Linux SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
HP ProLiant ML350 G4 Memory Configuration
The HP ProLiant ML350 G4 requires memory interleaving when more than one
DIMM is installed. For interleaving, DIMMs must be populated in identical
pairs. The system will not boot properly if multiple DIMMs of varying
density or type are installed in the system.
Standard Memory
All ML350 G4 models ship with Advanced ECC** PC2700 DDR SDRAM (running
at 333 MHz).
Non-array models include a single 512 MB DIMM.
Array models include a single 1 GB DIMM.
Factory Integrated Models include the memory capacity of your choice.
**NOTE: Advanced ECC Memory - ECC protection
provides the ability to detect and correct single bit memory errors while
Advanced ECC extends this coverage to include protection against multiple
simultaneous errors on a DIMM. Advanced ECC detects and corrects 4bit
memory errors that occur within a single DRAM chip on a DIMM. Advanced
ECC algorithms work in combination with industry standard ECC DIMMS.
Common Memory Upgrades from Base Memory NOTE: Charts do not represent all
possible memory configurations.
Pair 1
Pair 2
Total Capacity Required
Base Memory
(Non-Array Models)
DIMM Upgrade #1
DIMM Upgrade #2
DIMM Upgrade #3
512 MB
512 MB
Empty
Empty
Empty
1 GB
512 MB
512 MB
Empty
Empty
2 GB
512 MB
512 MB
512 MB
512 MB
3 GB
512 MB
512 MB
1 GB
1 GB
5 GB
512 MB
512 MB
2 GB
2 GB
Pair 1
Pair 2
Total Capacity Required
Base Memory
(Array Models)
DIMM Upgrade #1
DIMM Upgrade #2
DIMM Upgrade #3
1 GB
1 GB
Empty
Empty
Empty
2 GB
1 GB
1 GB
Empty
Empty
3 GB
1 GB
1 GB
512 MB
512 MB
4 GB
1 GB
1 GB
1 GB
1 GB
6 GB
1 GB
1 GB
2 GB
2 GB
Following are memory options available from HP: NOTE: All memory kits are single
DIMM kits
NOTE: 2 GB DIMMs
are supported in memory slots 1 and 2 only when slots 3 and 4 are also populated
with 2 GB DIMMs. In all other instances, 2 GB DIMMs should be installed
in slots 3 and 4.
*NOTE: The Two
Bay Hot Plug SCSI Drive Cage requires the use of both available removable
media bays (A+B). In most cases, it is not possible to install both a non
hot plug tape drive and the two bay hot pug SCSI drive cage option.
NOTE: Non hot plug SCSI models support a maximum of 4 total drive
devices in bays 0-5, A or B.
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML350 G4
- Click on: "Power Calculator" link. (You may need to scroll down
to see it)
(Support
for either two internal, two external, or a mix of internal/external is available.
This is achieved using an internal to external SCSI cable option kit (PN 159547-B22)
and either of the two SCSI knockouts.)
Power
Supply Output Power (per power supply)
Rated
Steady-State Power
725W
Temperature Range
Operating
50°
to 95° F (10° to 35° C) (No direct sustaining sunlight)
Storage (up to one year)
-40°
to 158° F (-40° to 70° C)
Maximum
Wet Bulb Temperature
82.4°
F (28° C)
Relative
Humidity (non-condensing)
Operating
10%
to 90%
Non-operating
5%
to 90%
Acoustic
Noise
Idle (Fixed Disk
Drives Spinning)
L WAd
(BELS)
6.5
L pAm
(dBA)
48
Operating (Random
Seeks to Fixed Disks)
L
WAd (BELS)
6.5
L
pAm (dBA)
48
System Unit - Hot
Plug SCSI Rack
Dimensions (HxWxD)
8.61 x19 x 24 in (21.87 x48.26
x 60.96 cm)
Weight(approximate)
60 lb (27.24 kg) (without hard
drives)
Input Requirements
(per power supply)
Rated Line Voltage
100 to 120 VAC
Rated Input Frequency
50 Hz to 60 Hz
Input Power
906W @ 100VAC
Rated Input Current
9.2A(100VAC),4.3A(200VAC)
Rated Line Frequency
50 to 60 Hz
BTU Rating
3,125 BTU/hr
SCSI Connectors
Two internal HD68 connectors
NOTE:
Support for either two internal, two external, or a mix of internal/external
is available. This is achieved using an internal to external SCSI cable
option kit, PN 159547-B22 or 333370-B21, and either of the two SCSI knockouts.
Power Supply Output Power
(per power supply)
Rated Steady-State Power
725W
Temperature Range
Operating
50° to 95° F (10°
to 35° C)
(No direct sustaining sunlight)
Storage (up to one year)
-40° to 158° F (-40°
to 70° C)
Maximum Wet Bulb Temperature
82.4° F (28° C)
Relative Humidity
(non-condensing)
Operating
10% to 90%
Non-operating
5% to 90%
Acoustic Noise
Idle
(Fixed Disk Drives Spinning)
L WAd (BELS)
6.5
L pAm (dBA)
48
Operating
(Random Seeks to Fixed Disks)
L WAd (BELS)
6.5
L pAm (dBA)
48
System Unit - Non
Hot Plug SCSI Tower
Dimensions
(HxWxD) (with feet/bezel)
18.5 x 10.25 x 25.75
in (46.99 x 26.04 x 65.4 cm)
Dimensions
(HxWxD) (without feet/bezel)
17.5
x 8.5 x 24 in (44.50 x 21.59 x 60.96 cm)
Weight(approximate)
60
lb (27.24 kg) (without hard drives)
Input Requirements (per power supply)
Rated Line Voltage
100 to 120 VAC
Rated
Input Frequency
50 Hz to 60 Hz
Input Power
676W @ 100 VAC
Rated Input
Current
6.9A(100VAC)/3.3A(200VAC)
Rated Line Frequency
50
to 60 Hz
BTU
Rating
2,360 BTU/hr
SCSI Connectors
Two internal HD68
connectors
(Support
for either two internal, two external, or a mix of internal/external is
available. This is achieved using an internal to external SCSI cable option
kit,PN 159547-B22 or 333370-B21, and either of the two SCSI knockouts.)
Power
Supply Output Power (per power supply)
Rated
Steady-State Power
460W
Temperature Range
Operating
50°
to 95° F (10° to 35° C) (No direct sustaining sunlight)
Storage (up to one year)
-40°
to 158° F (-40° to 70° C)
Maximum
Wet Bulb Temperature
82.4°
F (28° C)
Relative
Humidity (non-condensing)
Operating
10%
to 90%
Non-operating
5%
to 90%
Acoustic
Noise
Idle (Fixed Disk
Drives Spinning)
L WAd
(BELS)
6.0
L pAm
(dBA)
46.3
Operating (Random
Seeks to Fixed Disks)
L
WAd (BELS)
6.0
L
pAm (dBA)
46.5
NC7761 PCI Gigabit
Server Adapter (embedded)
Network
Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE
802.3 10Base-T
IEEE
802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data
Transfer Method
32-bit
bus-master PCI
Network
Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20
Mb/s
100Base-TX (Half-Duplex)
100
Mb/s
100Base-TX (Full-Duplex)
200
Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories
3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category
5 UTP; up to 328 ft (100 m)
Integrated Dual Channel
Ultra320 SCSI Adapter
Drives
Supported
Up to 28 SCSI devices
(14 per channel)
Data
Transfer Method
64-bit PCI bus-master
SCSI Channel Transfer Rate
320 MB/s per channel
Maximum
Transfer Rate per PCI Bus (peak)
400 MB/s per channel
SCSI
Protocols
Wide Ultra2 SCSI
Wide-Ultra SCSI-3
Ultra320 SCSI
Electrical
Protocol
Low Voltage Differential
(LVD)
SCSI Termination
Active
Termination
External
SCSI Connectors
Optional VHDCI and
HD68 internal-to-external connectors
Internal
SCSI Connectors
Two 68-Pin Wide-Ultra
SCSI-3 connectors
Smart Array 641 Controller (NOTE: The Smart Array 641 Controller
ships standard with the Array Models only.)
Protocol
Ultra320
SCSI
SCSI Electrical
Interface
Low Voltage Differential
(LVD)
Drives Supported
Up
to 6 Ultra 320, Ultra3 and Ultra2 SCSI hard drives
SCSI
Port Connectors SA-641
One internal
SCSI port
Data Transfer
Method
64-Bit PCI bus-master
PCI Bus Speed
64-bit,
133-MHz PCI-X (1 GB/s maximum bandwidth)
PCI
3.3
volt PCI slot compatibility only
Simultaneous
Drive Transfer Channels
One
Channel Transfer Rate
320-MB/s
total; 320-MB/s per channel
Software upgradeable Firmware
Yes
Cache Memory
64-MB
DRAM used for code, transfer buffers, and non-battery backed read cache
Logical Drives Supported
32
Maximum Capacity
1.80 TB (6 X 300 GB)
Memory
Addressing
64-bit, supporting servers
memory greater than 4 GB
Maximum:
The remaining warranty of the HP server product in which it is installed (to a
maximum three-year limited warranty) Minimum: One-year, on-site limited warranty
Pre-Failure Warranty: Drives attached to the Smart Array Controller and monitored
under Insight Manager are supported by a Pre-Failure (replacement) Warranty. For
complete details, consult the HP Support Center or refer to your HP Server Documentation.
Canadian Site
DL QuickSpecs
Search:
US QuickSpecs 
303284-B21
© 2013 USA PartsDirect