HP SAS SATA Hard Drives DELL SAS SATA Hard Drives IBM SAS SATA Hard Drives Seagate SAS SATA Hard Drives  Create Account    Your Cart    Checkout    Contact Us       
  Home: 

DL160 G5p QuickSpecs

Login | Create Account | Your Cart | Checkout | Contact Us  


 Search   |   |   Advanced Search 
      DL QuickSpecs
      DL120
  DL120 G5
  DL120 G6
  DL120 G7
      DL140
  DL140 G2
  DL140 G3
      DL145
  DL145 G1
  DL145 G2
  DL145 G3
      DL160
  DL160 G5
  DL160 G5p
  DL160 G6
      DL160se
  DL160se G6
      DL165
  DL165 G5
  DL165 G5p
  DL165 G6
  DL165 G7
      DL170h
  DL170h G1
      DL180
  DL180 G5
  DL180 G6
      DL185
  DL185 G5
      DL320
  DL320 G1
  DL320 G2
  DL320 G3
  DL320 G4
  DL320 G5
  DL320 G6
      DL360
  DL360 G1
  DL360 G2
  DL360 G3
  DL360 G4
  DL360 G4p
  DL360 G5
  DL360 G6
  DL360 G7
      DL365
  DL365 G1
  DL365 G5
      DL380
  DL380 G1
  DL380 G2
  DL380 G3
  DL380 G4
  DL380 G5
  DL380 G6
  DL380 G7
      DL385
  DL385 G1
  DL385 G2
  DL385 G5
  DL385 G5p
  DL385 G6
  DL385 G7
      DL560
  DL560 G1
      DL580
  DL580 G1
  DL580 G2
  DL580 G3
  DL580 G4
  DL580 G5
  DL580 G7
      DL585
  DL585 G1
  DL585 G2
  DL585 G5
  DL585 G6
  DL585 G7
      DL740
  DL740 G1
      DL760
  DL760 G1
  DL760 G2
      DL785
  DL785 G5
  DL785 G6
      DL1000
  DL1000
      ML QuickSpecs
      ML110
  ML110 G1
  ML110 G2
  ML110 G3
  ML110 G4
  ML110 G5
  ML110 G6
  ML110 G7
      ML115
  ML115 G1
  ML115 G5
      ML150
  ML150 G2
  ML150 G3
  ML150 G5
  ML150 G6
      ML310
  ML310 G1
  ML310 G2
  ML310 G3
  ML310 G4
  ML310 G5
  ML310 G5p
      ML330
  ML330 G1
  ML330 G2
  ML330 G3
      ML350
  ML350 G1
  ML350 G2
  ML350 G3
  ML350 G4
  ML350 G4p
  ML350 G5
  ML350 G6
      ML370
  ML370 G1
  ML370 G2
  ML370 G3
  ML370 G4
  ML370 G5
  ML370 G6
      ML530
  ML530 G1
  ML530 G2
      ML570
  ML570 G1
  ML570 G2
  ML570 G3
  ML570 G4
      ML750
  ML750 G1
      BL QuickSpecs
      BL10e
  BL10e G2
      BL20p
  BL20p G3
  BL20p G4
      BL25p
  BL25p G1
      BL260c
  BL260c G5
      BL280c
  BL280c G6
      BL2x220c
  BL2x220c G5
      BL30p
  BL30p G1
      BL35p
  BL35p G1
      BL40p
  BL40p G1
      BL45p
  BL45p G1
  BL45p G2
      BL460c
  BL460c G1
  BL460c G6
  BL460c G7
      BL465c
  BL465 G1
  BL465c G5
  BL465c G6
  BL465c G7
      BL480c
  BL480c G1
      BL495c
  BL495c G5
  BL495c G6
      BL60p
  BL60p G1
      BL680c
  BL680c G5
      BL685c
  BL685c G1
  BL685c G5
  BL685c G6
  BL685c G7
      BL860c
  BL860cG1
      CL QuickSpecs
      CL1850
  CL1850 G1
      CL380
  CL380 G1
   Proliant DL160 G5p QuickSpecs  US QuickSpecs 
  DL160 G5p Hard Drives   DL160 G5p Processors   DL160 G5p Memory
  DL160 G5p Controllers   DL160 G5p Networking   DL160 G5p Power Supplies
  DL160 G5p Quickspecs   DL160 G5p Quickspecs-Options   DL160 G5p Options
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Proliant DL160 G5p Overview

HP ProLiant DL160 Generation 5p (G5p)

Hot Plug SAS/SATA and Non-Hot Plug SATA Models
Proliant DL160 G5p Front View: Proliant DL160 G5p Rear View:
1. Access panel 1. Power Supply Cable Socket
2. Quad-Core Intel® Xeon® 5400 series processors (supports up to two) 2. PS/2 Mouse Port
3. PS/2 Keyboard Port
3. Sixteen PC2-5300 (DDR2-667) or PC2-6400 (DDR2-800) fully buffered DIMM memory slots 4. Two GbE LAN ports for NIC 1 and NIC 2 (RJ-45)
5. Rear USB ports
4. Power supply (650 Watts) 6. LO100i 10/100 Mbps LAN port for IPMI management (RJ-45)
5. System fans 7. Video Port
6.
Optional CD-RW or DVD-ROM drive
8. Serial Port
7. Two USB ports 9. Standard height/full-height PCI Express x16 board
8. Power on/off & system LEDs  
9. Optional 3rd and 4th 3.5" Non-Hot plug SATA or hot plug SAS/SATA hard drive bays
10. Standard 1st and 2nd 3.5" Non-Hot plug SATA or hot plug SAS/SATA hard drive bays
11. Expansion Slots:
One available x16 PCI-Express slot Gen2 slot

What's New
  • Support for SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
  • Support for SAS Hot Plug 3.5" Enterprise (ENT) Hard Drives

At A Glance

The HP ProLiant DL160 G5p server is an affordable 1U, dual processor capable server equipped with essential performance features that provide customers with a platform to design a fully optimized solution. It is ideal for general purpose and high performance computing.

  • Processors:
    • Supports up to two Intel® Quad-Core 5400 or Dual-Core 5200 sequence processors
      • Quad-Core Intel® Xeon® processors 5400 sequence with 12 MB Level 2 cache
      • Dual-Core Intel® Xeon® processors 5200 sequence with 6 MB Level 2 cache
    • Intel® 5400 Chipset
  • Memory:
    • Supports up to 128 GB PC2-5300 fully buffered DIMMs (DDR2-667) with Advanced ECC
    • Supports up to 64 GB PC2-6400 fully buffered DIMMS (DDR2-800) with Advanced ECC
  • Internal Drive Support:
    • Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or;
    • Support for up to four 3.5" Hot plug Serial Attached SCSI (SAS) or SATA hard drives or
    • Support for up to four 3.5" Hot plug SATA 3G SSD's.
    • NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
    • Internal storage capacity of up to 4.0TB (4 x 750GB Hot Plug 3.5" SATA), 3.0TB (4 x 750 Non-Hot Plug SATA) or 4.0TB (4 x 1TB Hot Plug 3.5" SAS)
  • Network Controller:
    • Two embedded NC105i PCIe Gigabit Server Adapters
  • Storage Controllers:
    • Non-Hot Plug SATA Models: HP Embedded SATA RAID Controller
    • Hot Plug SAS/SATA Models: HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
      NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
  • Expansion Slots:
    • One full-length/full-height PCI-Express 2.0 x16
  • Infrastructure Management:
    • HP Lights Out 100i Advanced Remote Management with new licensed key activated upgrades for Virtual KVM and virtual media support. LO100i management support for the DL160 G5p includes:
    • IPMI 2.0 & SMASH CLP support
    • ROM Setup Utility
    • Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVD-ROM support plus simplified virtual media (floppy and CD with no FTTP server requirements)
    • Enhanced browser interface and embedded KVM over IP provides OS-independent remote graphical console
  • USB Ports:
    • Five USB ports (two front, one internal, two rear)
  • Optical Drive:
    • Support for one (optional): DVD-ROM, DVD/CD RW
  • Power Supply:
    • 650W Power Supply (Non-Hot Plug, Autoswitching)
    • Optional high-efficiency model
      • NOTE: Optional high-efficiency model requires the purchase of HP Power Supply Backplane (453652-B21)
  • Form Factor:
    • Rack (1U)
    • Fixed mounting rails included with all models
  • Deployment/Serviceability:
    • Tool-less access to all system components for easy in rack serviceability
    • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
  • Warranty:
    • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
      NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Standard Features

NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section.

Processor
One of the following depending on Model
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor L5430 (2.60 GHz, 50W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5472 (3.00 GHz, 80W, 1600MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5462 (2.80 GHz, 80W, 1600MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
Dual-Core Processors
Dual-Core Intel® Xeon® processor X5272 (3.40 GHz, 80W, 1600MHz FSB)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.

Upgradeability Upgradeable to two processors

Chipset Intel® 5400 Chipset

Cache Memory 12 MB (2 x 6 MB) Level 2 cache (5400 sequence)
6 MB (1 x 6 MB) Level 2 cache (5200 sequence)

Memory Protection Advanced ECC capabilities

Memory Types PC2-5300 Fully Buffered DIMMs (DDR2-667)
PC2-6400 Fully Buffered DIMMS (DDR2-800)
Maximum 128 GB (16 x 8 GB) (PC2-5300)
64 GB (16 x 4 GB) (PC2-6400)

Network Controller Two embedded NC105i PCIe Gigabit Server Adapters

Expansion Slots #
Technology
Bus Width
Connector Width*
Bus Number*
Device No.**
Form Factor
Notes
1
PCI-Express 2.0
x16
x16
1
0
Full length, full height
3.3 volts
  * Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).

Storage Controller Non-Hot Plug SATA Models HP Embedded SATA RAID Controller (integrated into the south-bridge) supporting SW RAID 0,1
Hot Plug SATA/SAS Models HP SC40Ge HBA with RAID 0, 1
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
NOTE: A diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is needed to install storage controller drivers during a Windows operating system installation from a CD.

Storage Optical Drives:  
DVD-ROM 8x IDE (ATAPI) DVD-ROM drive, slim (optional)
DVD/CD RW 24x IDE (ATAPI) CD-ROM drive (optional)
Diskette Drives Via USB only
Drive Bays:  
Non-Hot Plug SATA Up to 4 Non-hot plug SATA 3.5" drives
Hot Plug SATA/SAS Up to 4 Hot plug SAS/SATA 3.5" drives

Maximum Internal Storage Non-Hot Plug SATA 3.0TB 4 x 750GB
Hot Plug SATA 4.0TB 4 x 1TB
Hot Plug SAS 4.0TB 4 x 1TB

Interfaces Parallel None
Network RJ-45(Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management)
Serial 1
Pointing Device (Mouse) 1
Graphics 1
Keyboard

1

USB 5 (two front, one internal, two rear)
NOTE: Please see the following URL for additional information regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.

Graphics

32MB shared supporting 1600x1200x16M resolution


Form Factor Rack (1U), (1.75 in/4.45 cm)

Remote Management

Lights-Out 100i

HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:

  • LO100i Standard is embedded remote management and provides basic remote control via telnet, browser, and IPMI 2.0 and SMASH
  • LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console)

NOTE: Flexible and volume quantity (AKA) license kits are available for both the Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products. QuickSpecs at this link for more information: www.hp.com/go/lo100


Industry Standard Compliance ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0, SMASH CLP compliant

Manageability

HP Lights-Out 100i Standard provides the following OS-independent remote control capabilities:

  • Virtual power
  • System event log access
  • System health
  • Remote serial console (serial redirection)
  • Browser, Telnet access
  • SMASH-CLP compliant
  • IPMI 2.0 compliant

HP Lights-Out 100i Advanced Pack provides license key activated upgrades to the following:

  • Virtual KVM (KVM over IP functionality embedded on the system board) plus all of the LO100i Select Pack features above.

Security Power-on password
Setup password

Server Power Cords

One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately.

If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.


UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: www.hp.com/products/powercords.

Power Supply 650 Watts, auto-switching, PFC (Power Factor Correcting)
NOTE: Factory upgradeable to high-efficiency (HE) power supply for lower TCO

System Fans 6 system fans ship standard; Non-hot plug, Non-redundant

Operating Systems and Virtualization Software Support for ProLiant Servers Microsoft Windows Server
Microsoft Windows Server 2008 Hyper V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86/x64 based Systems

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/supportos and our driver download page http://www.hp.com/support/DL160G5p

Rack Airflow Requirements Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl160.

Rack Support The DL Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".

Telco Rack Support Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. For additional information, please visit: www.racksolutions.com.

Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

HP Enterprise Configurator

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.


Service and Support

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

  • Support Service - 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
  • Deployment Service - Hardware Installation only

Enhanced Service - Optimize service level to increase IT performance and availability

  • Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
  • Deployment Service - Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

HPC Interconnects

NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5p under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html

HPC Interconnects InfiniBand PCI-Express adapters
Gigabit Ethernet Use embedded ports
Myrinet XP Rev D, Rev E and Rev F adapters
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
NOTE: FIO indicates that this option is a Factory Installable Option.

Step 1: Base Configuration (choose one of the following configurable models)
 Non-Hot Plug Model 
HP ProLiant DL160G5p Non-Hot Plug CTO Chassis
495834-B21
Factory Integrated Model ships with:
Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable)

One available PCI-Express 2 slot:
Slot 1: full-length/full-height

650 Watt Power Supply
One Highline IEC Power Cord 
6 Non-Hot Plug Fans 
Rack (1U), (1.75 in / 4.45 cm)
Fixed Rails
 
Hot Plug Model
HP ProLiant DL160G5p Hot Plug CTO Chassis
495835-B21
Factory Integrated Model ships with:
Two embedded NC105i PCIe Gigabit Server Adapters (WOL & PXE-capable)

One available PCI-Express 2 slot:
Slot 1: full-length/full-height

650 Watt Power Supply
One Highline IEC Power Cord 
6 Non-Hot Plug Fans 
Rack (1U), (1.75 in / 4.45 cm)
Fixed Rails
 

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Processors Quad-Core Processors
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB), FIO
495614-B21

Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB), FIO

462465-B21
Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB), FIO
495612-B21
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB), FIO
446085-B21
Quad-Core Intel® Xeon® processor L5430 (2.60 GHz, 50W, 1333MHz FSB), FIO
495616-B21
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB), FIO
495479-B21
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz FSB), FIO
448369-B21
Quad-Core Intel® Xeon® processor E5472 (3.00 GHz, 80W, 1600MHz FSB), FIO 448365-B21
Quad-Core Intel® Xeon® processor E5462 (2.80 GHz, 80W, 1600MHz FSB), FIO 463076-B21
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80 W, 1333 MHz FSB), FIO 446079-B21
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB), FIO 446077-B21
Dual-Core Processors  
Dual-Core Intel® Xeon® processor X5272 (3.40 GHz, 80W, 1600MHz FSB) 448371-B21

Memory 4 GB FBD PC2-5300 2 X 2 GB Kit
8 GB FBD PC2-5300 2 X 4 GB Kit
Dual Rank
4 GB FBD PC2-6400 800MHz 2 x 2 GB Dual Rank Kit
484060-B21
8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit
484062-B21
16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 413015-B21
Low Power
2 GB FBD PC2-5300 2 X 1 GB Low Power Kit 461826-B21 461826-B21
4 GB FBD PC2-5300 2 x 2 GB Low Power Kit 461828-B21 461828-B21
8 GB FBD PC2-5300 2 x 4 GB Low Power Kit 466440-B21 466440-B21

Hard Drive (NOTE: Only required when purchasing Non-Hot Plug CTO Chassis Model (P/N 495834-B21) in Step 1. NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
 
SATA Non-Hot Plug 3.5" Midline (MDL) Drives 
NOTE: A minimum of one hard drive is required when purchasing Non-Hot Plug CTO Chassis Model (P/N 495834-B21) in Step 1.
NOTE: SATA Non-Hot Plug Hard Drives to be used with Non-Hot Plug CTO Chassis Models Only).
 
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD

HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD

SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD458947-B21 458947-B21

Storage Controllers
NOTE: Only required when Hot- Plug CTO Chassis Model (P/N 495835-B21) is selected in Step 1.
NOTE: A minimum of one SAS Controller is required when purchasing Hot Plug CTO Chassis Model (P/N 495835-B21) in Step 1. 
HP Smart Array E200/128 Controller 411508-B21 411508-B21
HP Smart Array P400/256 Controller
405132-B21 405132-B21
HP Smart Array P400/512 Controller
411604-B21
HP Smart Array P800 Controller 381513-B21 381513-B21

HP SC40Ge SAS HBA, FIO
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
NOTE: Recommended HBA when purchasing Hot Plug CTO Chassis Model (P/N 495835-B21).

449176-B21

Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options and Additional Options" sections below. Some options may not be available for factory integration. Please contact an HP sales representative for additional information.
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

DL160 G5p Core Options

Processor Quad-Core Processors  
Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz FSB)
495614-B21
Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB)
462465-B21
Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB) 495612-B21
Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB)
446085-B21
Quad-Core Intel® Xeon® processor L5430 (2.60 GHz, 50W, 1333MHz FSB)
495616-B21
Quad-Core Intel® Xeon® processor L5420 (2.50 GHz, 50W, 1333MHz FSB)
495479-B21
Quad-Core Intel® Xeon® processor L5410 (2.33 GHz, 50W, 1333MHz Front Side Bus)
448369-B21
Quad-Core Intel® Xeon® processor E5472 (3.00 GHz, 80W, 1600MHz FSB)
448365-B21
Quad-Core Intel® Xeon® processor E5462 (2.80 GHz, 80W, 1600MHz FSB) 463076-B21
Quad-Core Intel® Xeon® processor E5430 (2.66 GHz, 80W, 1333MHz FSB) 446079-B21
Quad-Core Intel® Xeon® processor E5405 (2.00 GHz, 80W, 1333MHz FSB) 446077-B21
Dual-Core Processors  
Dual-Core Intel® Xeon® processor X5272 (3.40 GHz, 80W, 1600MHz FSB)
448371-B21

Memory

4 GB FBD PC2-5300 2 x 2 GB Kit
8 GB FBD PC2-5300 2 x 4 GB Kit
Dual Rank  
4 GB FBD PC2-6400 2 x 2 GB Dual Rank Kit 484060-B21
8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21
16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 413015-B21
Low Power
2 GB FBD PC2-5300 2 x 1 GB Low Power Kit
4 GB FBD PC2-5300 2 x 2 GB Low Power Kit
8 GB FBD PC2-5300 2 x 4 GB Low Power Kit

Optical Drives DVD-ROM Drive (optional)
447889-B21
DVD/CD RW Drive (optional)
447891-B21

Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
 
SATA Non-Hot Plug 3.5" Midline (MDL) Drives (Non-Hot Plug Models Only)
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD 458941-B21 458941-B21
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD 458939-B21 458939-B21
SATA Non-Hot 3.5" Plug Entry (ETY) Drives  
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD 458947-B21 458947-B21
SATA Hot Plug 3.5" Midline (MDL) Drives (SAS/SATA Hot Plug Models Only)  
NOTE: A SAS HBA or Array Controller is required.  
HP 1TB 3G SATA 7.2K 3.5" MDL HDD 454146-B21 454146-B21
HP 750GB 3G SATA 7.2K 3.5" MDL HDD 458930-B21 458930-B21
HP 500GB 3G SATA 7.2K 3.5" MDL HDD 458928-B21 458928-B21
HP 250GB 3G SATA 7.2K 3.5" MDL HDD 458926-B21 458926-B21
SATA Hot Plug 3.5" Entry (ETY) Drives  
HP 160GB 3G SATA 7.2K 3.5" ETY HDD 458945-B21 458945-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html
http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
 
SAS Hot Plug 3.5" Midline (MDL) Drives  
HP 1TB 7.2K 3.5" DP SAS MDL HDD 461137-B21 461137-B21
HP 750GB 7.2K 3.5" DP SAS MDL HDD 461135-B21 461135-B21
SAS Hot Plug 3.5" Enterprise (ENT) Drives  
HP 600GB 6G SAS 15K 3.5" DP ENT HDD 516828-B21 516828-B21
HP 450GB 6G SAS 15K 3.5" DP ENT HDD 516816-B21 516816-B21
HP 300GB 6G SAS 15K 3.5" DP ENT HDD 516814-B21 516814-B21
HP 450GB 3G 15K 3.5" DP SAS ENT HDD 454232-B21 454232-B21
HP 300GB 3G SAS 15K 3.5" SP HDD 431944-B21 431944-B21
HP 300GB 3G SAS 15K 3.5" DP HDD 416127-B21 416127-B21
HP 146GB 3G SAS 15K 3.5" SP HDD 375872-B21 375872-B21
HP 146GB 3G SAS 15K 3.5" DP HDD 384854-B21 384854-B21
HP 72GB 3G SAS 15K 3.5" SP HDD 375870-B21 375870-B21
NOTE: The purchase of SAS HBA or array controller is required.  
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html  
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives  
HP 120GB 3G SATA 3.5in MDL 1y Wty SSD 570763-B21
HP 60GB 3G SATA 3.5in MDL 1y Wty SSD 570761-B21
NOTE: Please see QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13145_na/13145_na.html
 

Communications Gigabit Ethernet Adapters  
HP NC364T PCI Express Quad Port Gigabit Server Adapter 435508-B21 435508-B21
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Supported only by the HP ProLiant DL160G5p Non-Hot Plug CTO Chassis (P/N 495834-B21).
458492-B21 458492-B21
HP 10 GbE PCI-e G2 Dual Port NIC 516937-B21
10 Gigabit Ethernet Adapters  
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.
468332-B21 468332-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs.  
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Additional Options

Remote Management Lights-Out 100i Advanced Pack  
HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates 530521-B21
NOTE: Flexible and volume quantity (AKA) license kits are available for Lights-Out 100 Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional license kits, please refer to each software products' QuickSpecs at this link for more information: http://www.hp.com/go/lo100  

HP Insight Software HP Insight Rapid Deployment software  
HP Insight Rapid Deployment software No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
452151-B21
NOTE: For additional license kits including electronic delivery options, please see the Rapid Deployment Software QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html  

Hot Plug HDD Backplane Option Hot Plug HDD Backplane 1U 2S Kit
445985-B21
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.  

HPC Specific Options HP IB 4X DDR Conn-X PCI-e G2 Dual Port HCA 483514-B21

StorageWorks Options StorageWorks Fibre Channel HBA  
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.www1.hp.com/storage/saninfrastructure/hba.html  
Brocade Fibre Channel HBAs  
HP 81B PCIe 8Gb FC Single Port HBA AP769A AP769A
HP 82B PCIe 8Gb FC Dual Port HBA AP770A AP770A
HP 41B PCIe 4Gb FC Single Port HBA AP767A AP767A
HP 42B PCIe 4Gb FC Dual Port HBA AP768A AP768A
Emulex Fibre Channel HBAs  
HP StorageWorks 81E 8Gb SP PCI-e FC HBA AJ762A AJ762A
HP 82E 8Gb Dual-port PCI-e FC HBA AJ763A AJ763A
HP StorageWorks FC2142SR 4Gb PCI-e HBA A8002A A8002A
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA A8003A A8003A
QLogic Fibre Channel HBAs  
HP StorageWorks 81Q PCI-e FC HBA AK344A AK344A
HP StorageWorks 82Q 8Gb Dual Port PCI-e FC HBA AJ764A AJ764A
HP StorageWorks FC1142SR 4Gb PCI-e HBA AE311A AE311A
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA AE312A AE312A

Uninterruptible Power Systems HP Tower UPS  
HP T1000v UPS
HP T1000v UPS
AF443A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information
http://h18000.www1.hp.com/products/quickspecs/13130_na/13130_na.html
HP Rack-mountable UPS  
HP R1500 G2 UPS  
HP R1.5 VA 1U UPS AF419A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12507_na/12507_na.html
 

HP Rack Options HP KVM Switch Options  
2x1x16 IP Console Switch with Virtual Media AF601A AF601A
4x1x16 IP Console Switch with Virtual Media AF602A AF602A
2x16 Server Console Switch with Virtual Media AF600A AF600A
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.
AF604A AF604A
HP Server Console Switch (KVM), 0 x 1 x 8 port 336044-B21 336044-B21
HP Server Console Switch (KVM), 0 x 2 x 16 port 336045-B21 336045-B21
PS/2 Interface Adapter, 1 pack 262588-B21 262588-B21
PS/2 Interface Adapter, 8 pack 262587-B21 262587-B21
HP 1x4 Console Switch AF611A AF611A
HP PS2 Server Console Cable, 6 foot, 2-Pack AF612A AF612A
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
AF613A AF613A
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches. Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm  
HP Serial Console Server Options
 
HP 16 Port Serial Console Server (worldwide)
AF101A AF101A
HP 48 Port Serial Console Server (worldwide)
AF102A AF102A
Serial Adapter, RJ45-D89 DCE Female, 1-pack
AF103A AF103A
Serial Adapter, RJ45-D89 DCE Female, 8-pack
AF110A
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm  

USB Options HP 1GB USB 2.0 Floppy Drive Key 442085-B21
USB Floppy Drive DC361B
HP USB-P/S2 Mouse
DC369A
HP USB Internal Cable Kit
451363-B21

Service and Support Offerings
(HP Care Pack Services)
Hardware Services 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
U9509E
24-Hour x 7 Day Coverage, 3 Years, Electronic
U9510E
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
U9508E
Hardware Services 6-Hour Call to Repair On-Site Service
Hardware Installation, Electronic
U9520E
NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack  
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Memory

HP ProLiant DL160 G5p
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
1GB (2x512MB) or 2GB (2 x 1GB) depending on model, PC2-5300 Fully Buffered DIMM memory, with Advanced ECC.

Maximum Memory
Up to 128GB memory is available with the optional installation of PC2-5300 or up to 64GB PC2-6400 Fully Buffered DIMM memory kits.
NOTE: Memory should be installed in pairs and matched for optimum performance.
NOTE: Chart does not represent all possible memory configurations.
Memory
Slot
 
1
2
3
4
5
6
7
8
Standard (1 GB)
512 MB
Empty
512 MB
Empty
Empty
Empty
Empty
Empty
Standard (2 GB)
1 GB
Empty
1 GB
Empty
Empty
Empty
Empty
Empty
Maximum (64GB)
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
 
Memory
Slot
  9 10 11 12 13 14 15 16
Standard (1 GB)
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Standard (2 GB)
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Maximum (64GB)
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
8 GB
   

Following are memory options available from HP:

 
4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 397413-B21
8 GB FBD PC2-5300 2 X 4 GB Kit
Dual Rank  
4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit
484060-B21
8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit
484062-B21
16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 413015-B21
Low Power
2 GB FBD PC2-5300 2 X 1 GB Low Power Kit
4 GB FBD PC2-5300 2 x 2 GB Low Power Kit 461828-B21 461828-B21
8 GB FBD PC2-5300 2 x 4 GB Low Power Kit 466440-B21 466440-B21
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Storage

1-4 Four Non-hot plug SATA or four 3.5" Hot-plug SAS/SATA hard drive bays
A Optional DVD-ROM, or DVD/CD RW

Drive Support


Removable Media
 
 

Quantity
Supported

Position
Supported

Controller

DVD-ROM

Up to 1

A

Integrated IDE (ATAPI) (optional)

DVD/CD RW

Up to 1

A

Integrated IDE (ATAPI) (optional)


Hard Drives

NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
 

Quantity
Supported

Position
Supported

Controller

750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
Up to 4
1-4
HP Embedded SATA RAID Controller
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
  Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 7.2K Up to 4 1-4 HP Embedded SATA RAID Controller

SATA Hot Plug 3.5" Midline (MDL) Drives
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
 

Quantity
Supported

Position
Supported

Controller

1TB 3G SATA 7.2K
750GB 3G SATA 7.2K 500GB 3G SATA 7.2K 250GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 4
1-4
HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.

SATA Hot Plug 3.5" Entry (ETY) Drives
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
  Quantity
Supported
Position
Supported
Controller
160GB 3G SATA 7.2K Up to 4 1-4 HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.

SAS Hot Plug 3.5" Midline (MDL) Drives
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
  Quantity
Supported
Position
Supported
Controller
1TB 3G 15K
750GB 3G 15K
Up to 4 1-4 Embedded SATA with integrated SATA RAID 0,1

SAS Hot Plug 3.5" Enterprise (ENT) Drives
NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
 

Quantity
Supported

Position
Supported

Controller

600GB 6G SAS 15K
450GB 6G SAS 15K
450GB 3G SAS 15K
300GB 3G SAS 15K
146GB 3G SAS 15K
72GB 3G SAS 15K
Up to 4
1-4
HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1

SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
 

Quantity
Supported

Position
Supported

Controller

120GB 3G SATA
60GB 3G SATA
Up to 4
1-4
HP SC40Ge 4-Port Internal SAS HBA with RAID 0, 1
NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS
HP Smart Array P400 Controller
HP Smart Array P800 Controller
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Power Specifications

Operational Input Voltage Range (Vrms) 90Vac to 264Vac full range
Frequency Range (Nominal) (Hz) 47 Hz to 63 Hz
       
Nominal Input Voltage (Vrms)
100
115
200
220
230
240
Max Rated Output Wattage Rating
653.10
653.19
653.08
652.96
653.08
652.96
Nominal Input Current (A rms)
8.55
7.31
4.12
3.77
3.6
3.46
Max Rated Input Wattage Rating (Watts)
855
840.72
824.12
827.5
806.3
805.71
Max. Rated VA
(Volt-Amp)
990
990
990
990
990
990
Efficiency (%)
76.39
77.69
79.25
78.91
81
81.04
Power Factor
0.998
0.997
0.983
0.976
0.973
0.969
Leakage Current (mA)
<3.5mA
<3.5mA
<3.5mA
<3.5mA
<3.5mA
<3.5mA
Maximum Inrush Current (A peak)
60A
60A
60A
60A
60A
60A
Maximum Inrush Current Duration (mS)
1mS
1mS
1mS
1mS
1mS
1mS
contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

System Specifications

Power    
ProLiant DL160 G5p Fully Configured
115V/60Hz
220V/50Hz
Fully Loaded System Input Wattage (W)
651
638
Fully Loaded System Input Current (A rms)
5.7
3.0
Fully Loaded System Thermal (BTU- Hr)
2218
2174
Fully Loaded System VA (Volt-Amp)
657
657
System Leakage with all power supplies loaded (mA)
1.58
3.03
System Inrush Current with all power supplies loaded (A)
19
37
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
NOTE: Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-ROM, and (2) PCI cards.
Power Cord
AF556A
   
Server Power Cords

One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately.

If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.

contents
 Overview      Standard Features      HPC Interconnects      Configuration Information - Factory Integrated Models      DL160 G5p Core Options      Additional Options      DL160 G5p Memory      Storage      Power Specifications      System Specifications      DL160 G5p QuickSpecs images/line.gif (50 bytes)

Quickspecs

System Unit Dimensions (H x W x D)
(with bezel)
1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)
Weight
(approximate)
Maximum
(all hard drives, power supplies, and processors installed)
37.00 lb (16.78 kg)
Minimum
(one hard drive, power supply, and processor installed)
30.00 lb (13.69 kg)
Input Requirements
(per power supply)
Rated Line Voltage 90 to 140 VAC
180 to 264 VAC
Rated Input Current 7.31A at 115VAC
3.6A at 230VAC
Rated Input Frequency 47 to 63 Hz
Rated Input Power 855W (at 100 VAC),
840.72W (at 200 VAC)
Power Specifications To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient

- Click on the system of interest. Example: DL160 G5p
- Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State Power 653.10W (at 100 VAC),
653.08W (at 200 VAC)
System Inlet Temperature Operating 50° to 95° F (10° to 35° C) at sea level with an altitude derating of 1.8°F per every 1000 ft (1.0°C per every 305 m) above sea level to a maximum of 10,000 ft (3050 m), no direct sustained sunlight. Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above 86°F (30°C).
Non-operating 40° to 140° F (-40° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Relative Humidity
(non-condensing)
Operating 10% to 85% relative humidity (Rh), 82.4°F (28°C) maximum wet bulb temperature, non-condensing.
Non-operating 10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet bulb temperature, non-condensing.
Altitude Operating 10,000 ft (3050 m). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 1500 ft/min (457 m/min).
Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min).
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle  
   LWAd 6.86
   LpAm 52.36dBA
Operating  
   LWAd 6.89
   LpAm 52.60dBA
Emissions Classification (EMC) FCC Rating A
Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

Embedded NC105i PCIe Gigabit Server Adapter Network Interface Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
Data Transfer Method Compliant to x1 PCIe Specification
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and Full-Duplex) 2000Mb/s
Connector RJ-45 connector
Cable Support Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethemet on standard Category 5 UTP

Environment-friendly Products and Approach End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.


USAPartsDirect          Ph: 1.613.599.1287                   Fax: 1.613.599.8120
serversServers |bladesBlades | Hard DrivesU2/U3 |u320 Hard DrivesU320 |SAS/SATA Hard DrivesSAS/SATA |Fibre Hard DrivesFibre |MemoryMemory |ControllersControllers |Processors Processors |Tape DrivesTape Drives |Power SuppliesPower Supplies
Home | Shopping Cart | Delivery | Forgot Password | Order By Phone | Create an Account | Add to favorites
   
Legal | Privacy | | Primary Site | Contact us | Site Problem?  |