IntelÒ PentiumÒ III Xeon™
900 MHz processors (eight processor capability)
At A Glance
The ultra-capacity data center server with breakthrough 8-way scalable performance and
the highest levels of internal fault tolerant storage for 7 x 24 environments
8-way server with Compaq/Intel co-developed Profusion architecture and Pentium III Xeon
900 MHz to 700 MHz processor support
14U rack-optimized design
1-MB and 2-MB L2 Cache
ECC-protected memory bus and cache
100-MHz SDRAM DIMM memory that is expandable to 16 GB
Ten 64-bit PCI and one 32-bit PCI I/O expansion slots (2 x 66 MHz, 9 x 33 MHz) all PCI
Hot Plug
Smart Array 4250ES Controller (cableless) with available optional redundancy
Integrated Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 in a slot,
upgradeable to Gigabit
Internal hot plug disk capacity of 1.528 TB (21 x 72.8-GB 1²
hot plug Wide Ultra3 hard drives)
Industry-Standard PCI Hot Plug with push button functionality
ROM-Based Setup Utility (R-BSU)
Compaq Insight Manager™, SmartStart™ and Rack Builder
Easily serviceable design
NSTL YMARK2000 tested
Protected by Compaq Services, including a three-year, Next Business Day on-site,
limited, Global warranty and extended Pre-Failure Warranty that covers processors, memory
and disk drives — Certain restrictions and exclusions apply. Consult the Compaq
Customer Support Center at 1-800-345-1518 for details.
Intel
Pentium III Xeon processor 900 MHz
Intel Pentium III Xeon processor 700 MHz
Cache
Memory
2-MB
level 2 writeback cache per processor standard
Note: Available with 900 MHz Models or
700 MHz 4P Models.
One of the following depending on Model
1-MB
level 2 writeback cache per processor standard
Note: Available with 700 MHz 2P Models
only.
Cache
Accelerator
Cache
Accelerator Standard
Upgradability
Upgradable
to eight processors
Chipset
Profusion
co-developed and licensed by Compaq and Intel
Memory
Standard
2048 MB
of 100-MHz ECC SDRAM DIMM memory
(4P Models)
One of the following depending on Model
Maximum
16 GB
Standard
1024 MB
of 100-MHz ECC SDRAM DIMM memory
(2P Models)
Maximum
16 GB
Network
Controller
Integrated
Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 in a slot, upgradeable to Gigabit
Expansion
Slots
I/O (11 Total)
(Ten 64-bit PCI, one 32-bit PCI)
PCI Voltage:
66 MHz PCI (Hot Plug)
2
3.3 Volt
33 MHz PCI (Hot Plug)
9
5 Volt
Storage
Controller
Smart
Array 4250ES Controller
Storage
Diskette Drives
Integrated
1.44 MB (Low-Profile)
CD-ROM
Integrated
24x IDE CD-ROM Drive (Low-Profile)
Hard Drives
None
Maximum Internal
Storage
1.528 TB
(21 x 72.8-GB Wide Ultra3 1² drives) (Internal hot plug drive
cages only)
Interfaces
Parallel
1
Serial
2
Pointing Device
(Mouse)
1
Graphics
1
Hot Plug Keyboard
1
Network RJ-45
2
Graphics
Integrated
1280 x 1024 x 256 color on PCI local bus, 2-MB video memory
Form
Factor
14U Rack
Form Factor; ships with sliding rack rails and cable management arm; standard 19² rack-mountable
ProLiant™
Essentials Foundation Pack Software
Insight Manager 7
Insight
Manager 7 helps maximize system uptime and performance and reduces the cost of maintaining
the IT infrastructure by providing proactive notification of problems before those
problems result in costly downtime and reduced productivity. Insight Manager 7 is easy to
set up and provides rapid access to detailed fault and performance information gathered by
the Management Agents. One-click access to the Integrated Lights-Out or Remote Insight
Lights Out Edition board allows systems administrators to take full graphical control of
ProLiant servers in remote locations or lights-out data centers. Finally, Insight Manager
7 in concert with the Version Control Agents and Version Control Repository Manager
enables systems administrators to version manage and update system software across groups
of ProLiant servers.
SmartStart
SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable and
consistent server configurations. For more information, please visit the SmartStart
website at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 5.00
Management Agents
The
Management Agents form the foundation for HP’s Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into HP
servers, workstations, desktops, and portables, and send alerts to Insight Manager 7 and
other enterprise management applications in case of subsystem or environmental failures.
For additional information about the Management Agents and other management products from
HP, please visit the management website at http://www.hp.com/servers/manage.
ActiveUpdateä
ActiveUpdate
is a web-based application that keeps IT managers directly connected to HP for proactive
notification and delivery of the latest software updates.
ROMPaqä, support software, and configuration utilities
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant server
and options.
Survey Utility and
diagnostics utilities
The most
advanced configuration analysis, reporting and troubleshooting utilities used by HP and at
your fingertips.
Optional
ProLiant Essentials Value Packs
Optional
software offerings that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Rapid Deployment Pack – an automated solution for multi-server deployment and
provisioning, enabling companies to quickly and easily adapt to changing business demands.
Workload Management Pack – provides easier management of complex environments,
improving overall server utilization and enabling Windows 2000® customers for
the first time to confidently deploy multiple applications on a single multiprocessor
ProLiant Server.
Note: For more information regarding ProLiant Essentials Software, please
see the following URL: http://www.hp.com/servers/proliantessentials.
Note: This Web site is available in English only.
Industry
Standard Compliance
ACPI 2.0
Compliant
PCI 2.2 Compliant
PAE Support
MicrosoftÒ Logo certifications
Manageability
Insight
Manager7
Remote Lights-Out Edition (optional)
ROM-Based Setup Utility (R-BSU)
Integrated Remote Console (IRC)
Integrated Management Display (IMD)
Automatic Server Recovery-2 (ASR-2)
Advanced Configuration and Power Interface Specification Ready (ACPI)
Server Health Logs
Off-Line Backup Processor capability
Compaq Redundant Power Supply Utility
Compaq Power Down Utility
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Availability
PCI Hot
Plug with push button functionality
Redundant Smart Array 4250ES Controller option
Redundant Hot Plug Power Supplies
Redundant Hot Plug Fans
Redundant Processor Power Modules
Dynamic sector repairing and drive parameter tracking (with Smart Array controllers)
Redundant/adaptive load balancing NIC Support
Hot Plug Dual Port 10/100 TX NIC
ECC Memory
Security
Power-on
password
Hot plug keyboard password
Diskette drive control
Diskette boot control
Network Server Mode
Security provision
Parallel and serial interface control
Administrator's password
Disk configuration lock
Keylock System chassis
Power supply security bar
Server
Power Cords
Two
Lowline power cords & two Highline power cords ships standard (North America)
Two Highline power cord ships standard (ROW)
Power
Supply
Two
1150/500-Watt Hot Plug Redundant Power Supplies (support for up to three Hot Plug Power
Supplies).
Power supplies are load sharing and provide 1150 Watts of Redundant power for 220-volt
input or 500 Watts of Redundant power for 110-volt input.
Note: A third power supply is required for redundancy if one
or more of the following exists:
>4 Processors>8-GB Memory
>8 PCI Cards
>15 Hard Drives
6 Hard Drives = 1 Processor
Each 512-MB Memory = 2 3.3V PCI Cards
Rack 9000 and 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased
cooling efficiency for rack-mounted servers. The Compaq 9000 Series Rack and the new 10000
Series Racks provides enhanced airflow for maximum cooling, allowing these racks to be
fully loaded with servers using the latest processors.
Rack 7000 series Cabinets
When installing a server with processors running at speeds of 550 MHz or greater in Compaq
Rack 7000 series racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the new
processor technology requires the installation of Compaq’s new High Airflow Rack Door
Inserts ( 327281-B21 (42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote
enhanced airflow for maximum cooling.
CAUTION: If a third-party rack is
used, observe the following additional requirements to ensure adequate airflow and to
prevent damage to the equipment:
Front and rear doors:
If your 42U server rack includes closing front and rear doors,
you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to
bottom to permit adequate airflow (equivalent to the required 64 percent open area for
ventilation).
Side:
The clearance between the installed rack component and the side panels of the
rack must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel
U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
Note:
For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support section
at the following URL: http://www5.compaq.com/products/servers/proliantml750/index.html.
Service and Support
Compaq
Services provides a three-year, limited warranty, including Pre-Failure Warranty (coverage
of hard drives, memory and processors) fully supported by a worldwide network of resellers
and service providers. Compaq technical assistance is available 7x24, toll free in the
United States and Canada. Telephone support services may be covered under warranty or
available for an additional fee.
Note: Limited Warranty includes 3 year
Parts, 3 year Labor, 3-year on-site support.
A full
range of CarePaqäpackaged hardware and software
services:
Installation and start up
Extended coverage hours and enhanced response times
System management and performance services
Availability and recovery services
Note: For more information,
customer/resellers can contact
Note: These
options are only supported in the ProLiant 8000 server.
ProLiant 8000 Pentium III Xeon
550 MHz to 900 MHz Upgrade Kit
Note: This upgrade kit (PN 231092-B21)
enables customers to upgrade from 550 MHz Pentium III Xeon processor technology to 900 MHz
Pentium III Xeon processor technology.
Note: The upgrade kit includes the following:
4 x Pentium III Xeon 900MHz/2MB processors
Rom BootBlock chip, and chip removal tool
Service event (Installation)
Cables and software for re-programming PAL
Detailed instructions guide
Note: This Upgrade Kit (PN 231092-B21) is only supported by the ProLiant 8000 server.
231092-B21
ProLiant 8000 Pentium III Xeon
550 MHz to 700 MHz Upgrade Kit
Note: This upgrade kit (PN 202428-B21)
enables customers to upgrade from 550 MHz Pentium III Xeon processor technology to 700 MHz
Pentium III Xeon processor technology.
Note:This Upgrade Kit (PN 202428-B21) is only supported by the ProLiant 8000
server.
202428-B21
ProLiant Essentials Value Pack
Software
Rapid Deployment Pack, 1 User,
V1.x
Note: This license allows 1 server to be
managed and deployed via the Deployment Server.
267196-B21
Rapid Deployment Pack, 1 User,
V1.x (Japan)
Note: This license allows 1 server to be
managed and deployed via the Deployment Server.
267196-291
Rapid Deployment Pack, 10 Users,
V1.x
Note: This license allows 10 servers to be
managed and deployed via the Deployment Server.
269817-B21
Rapid Deployment Pack, 10 Users,
V1.x (Japan)
Note: This license allows 10 servers to be
managed and deployed via the Deployment Server.
269817-291
ProLiantEssentials
Workload Management Pack (Featuring Resource Partitioning Manager version 2.0)
Note: Flexible
and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer
to http://www.compaq.com/proliantessentials or the various ProLiant Essentials Value Pack
product QuickSpecs for more information.
Note: For more information regarding ProLiant Essentials Software, please see the
following URL: http://www.compaq.com/proliantessentials.
Note: These Web sites are available in English only.
NetServer to ProLiant
integrations services
HP NetServer to ProLiant
integration and assessment service
Note: HP identifies current levels of
NetServer support, services, and management. This service helps maximize customer’s
ability to add ProLiant platforms into their current environment
304164-002
HP TopTools to Insight Manager 7
installation and startup service
Note: Provides on-site review, installation
and configuration services for Insight Manager 7. HP will also re-create, as closely as
possible, the views and reports from the customer’s current TopTools configuration.
This service assures a smooth transition to the ProLiant Essentials software.
304163-002
HP NetServer to ProLiant
Essentials Rapid Deployment Pack installation and startup service
Note: Install and configure Rapid Deployment
Pack in a test environment, then deploy a server image to a maximum of 250 systems in the
production environment. This service helps to assure successful system deployment.
304162-002
Processor
Note: Pentium III
Xeon 550 MHz, 700 MHz, and 900 MHz processors cannot be mixed in the same server. They all
have to be of the same speed.
Pentium III Xeon X900-2MB
Processor Option Kit
Note: This processor option kit (PN
177666-B21) supports the ProLiant ML750,
ProLiant DL760, ProLiant 8500, and the ProLiant 8000 servers.
256-MB Battery-Backed Cache
Module
Note: This 256-MB Battery-Backed Cache Module
supports the Smart Array 5300 series controllers, MSA 1000 and the Smart Array Cluster
Storage
64-bit/66-MHz Single Channel Wide
Ultra3 SCSI Adapter
(The 64-bit/66-MHz Single Channel Wide Ultra3
SCSI Adapter (154557-xx1) will default to Wide Ultra2 speeds when not used with the Wide
Ultra3 SCSI hard drives.)
64-bit/66-MHz Dual Channel Wide
Ultra3 SCSI Adapter
(The 64-bit/66-MHz Dual Channel Wide Ultra3
SCSI Adapter (129803-xx1) will default to Wide Ultra2 speeds when not used with the Wide
Ultra3 SCSI hard drives.)
Note:
Monitors larger than 17² may be too heavy for use in rack
systems.
CRT Country Code Key
NORTH AMERICA
(NA)/LATIN AMERICA (LA)
Dash #
Description
-001
NA Kit with US Power
Cord
-002
Carbon model with US
Power Cord
-003
Touch Screen model
with US Power Cord
-004
NAFTA model with US
Power Cord (Made in Mexico)
-005
NA Kit with Powered
Speakers
-006
GSA model with US
Power Cord
-007
NH MPR model with US
power cord (Made in Mexico)
-B24
TCO model without
power cord (Digital Classic)
-201
EH model for Brazil
(older Brazil models used -B29)
-202
EH model for Brazil
Carbon (older Brazil models used -B29)
-C91
EH model for Mercosur
countries
-C92
EH model for Mercosur
countries Carbon
-B29
EH/ALADI model for
Latin America
Note: All NA/LA models above are NH.
EUROPE, MIDDLE
EAST AND AFRICA (EMEA)
Dash #
Description
-021
NH/TCO with Eurocord
(DCE Hub)
-022
NH/MPR with Eurocord
(DCE Hub) (India)
-023
NH Carbon model with
Eurocord (DCE Hub)
-024
NH Touch Screen model
with Eurocord (DCE Hub)
-025
NH Kit with Speakers
and Eurocord
-A91
NH/TCO without power
cord (Dubai hub)
-A92
NH/MPR without power
cord (Dubai hub)
-031
NH/TCO with UK Cord
(UK Hub)
-032
NH/MPR with UK Cord
(UK Hub)
-033
NH/TCO carbon with UK
Cord
-035
NH Kit with Speakers
and UK Cord
-B21
SH/MPR without power
cord (S. Africa Hub)
-B23
SH/TCO without power
cord (S. Africa Hub)
-B27
SH/TCO Carbon without
power cord (S. Africa Hub)
PACIFIC/AUSTRALIA
(APD)
Dash #
Description
-B22
NH/MPR without power
cord
-B24
NH/TCO without power
cord
-B25
EH Carbon model
without power cord
-B26
NH Touch Screen model
without power cord
-011
SH model with AUZ/NZ
power cord
-015
SH model with
speakers AUZ/NZ power cord
-012
SH Carbon model with
AUZ/NZ power cord
-AD1
NH model for Korea
-AD2
NH Carbon model for
Korea
-B28
EH model without
power cord
-B35
EH model with
speakers no power cord (Singapore)
GREATER CHINA
(GCD)
Dash #
Description
-AA1
NH/China Kit with
CCIB label (Local Sales)
-AA2
NH/Carbon China Kit
with CCIB label (Local Sales)
-KA1
NH/China Kit with
CCIB label (External Sales/Bundles in HK)
-AB1
NH/Taiwan kit, mfg.
in Taiwan
JAPAN (CKK)
Dash #
Description
-291
NH/Japan Kit with 3-2
pin adapter
-292
NH Carbon Japan Kit
with 3-2 pin adapter
TFT Country Code Key
EUROPE, MIDDLE
EAST & AFRICA (EMEA)
Dash #
Description
-021
Europe
-031
UK
NORTH AMERICA
Dash #
Description
-001
NA
-B24
All NA/LA models
APD
Dash #
Description
-011
Australia/NZ
JAPAN (CKK)
Dash #
Description
-291
Japan
Tape Drives
Note:
A separate SCSI controller is required if you are installing an internal tape device
Note:
In order to install certain tape drives internally, you may need to remove the rails that
come standard on the drives and then re-insert the screws in the mounting holes.
3U Rackmount Kit
Note: The 3U Rackmount Kit (PN 274338-B21) can
support up to (2) full-height or (4) half-height tape drives and compatible with multiple
Single-Ended and LVD SCSI Tape Drives including the 12/24-GB DAT, 20/40-GB DAT, 20/40-GB
DAT DDS-4 8 Cassette Autoloader, AIT 35-GB LVD, AIT 50 GB, 20/40-GB DLT, 40/80-GB DLT, and
the SDLT 110/220-GB Tape Drives.
5U Rackmount Kit
Note: The 5U Rackmount Kit (PN 274339-B21) can
support up to (4) full-height tape drives and is compatible with all Compaq DLT/SDLT tape
drives including the 20/40-GB DLT, 35/70-GB DLT, 40/80-GB DLT, and the SDLT 110/220-GB
tape drives.
64-Bit/66-Mhz Dual Channel Wide
Ultra3 SCSI Adapter
Note: 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Adapter is required to support the LVD
based libraries (ESL9595SL).
Note:
Options include controller, solution kits, ACS. MA8000/EMA12000 includes controller shelf,
drive shelves and cabinet. Packaging upgrade to RA8000/ESA12000.
Note: Models
include: Dual HSG80 controllers in each Model 2200 enclosure (2 pairs per single bus
configuration,
4 pairs per dual bus configuration) with 1GB cache per controller pair, and 12 14-bay
drive enclosures with redundant power supplies. Configure-to-Order (CTO) builds are
available. Options include ACS, platform kits and SANworks™ software by
Compaq.
Note: Please see the StorageWorks EMA16000 QuickSpecs for FC switches, platform
software, host adapters, disks and options for complete solutions at:
Rack-Mountable
PDUs – 1U/0U
(Up to 12 outlets)
Note: 0U mounting brackets shipped with the
unit (separate option kit for 1U mounting).
Compaq Power Distribution
Unit-16A (200 to 240V) (WW)
Note: The 16A PDU also connects to the high
volt models of the UPS R3000 XR (need cable PN 340653-001 (NA)) and the UPS R6000 models.
Cable PN 340653-001 required if connecting to UPS R3000 XR ( 192186-002 NA-High Volt model
only).
207590-B21
Compaq Power Distribution
Unit-24A (200 to 240V) (NA, Japan, LA)
Note: This PDU may also be used to connect to
the low volt UPS R3000 XR model.
207590-D72
Compaq Power Distribution
Unit-32A (200 to 240V) (Int’l)
207590-B31
Compaq Power Distribution
Unit-40A (200 to 240V) (WW)
207590-B23
Compaq Power Distribution
Unit-24A (100 to 127V) (NA, Japan, LA)
207590-D71
1U PDU Mounting Brackets
Note: The 1U PDU Mounting Brackets are
required when mounting PDU’s PN 207590-xxx series in 1U configurations.
Modular PDUs 1U/0U
(Up to 32 outlets)
Note: 1U/0U mounting brackets shipped with the
unit (optimized for 10000 and 9000 series racks).
Modular Power Distribution Units
(mPDU), Low Volt Model, 24A (100-127 VAC) (NA, Japan)
Note: This mPDU ( 252663-D71) may also be used
to connect the low volt model of the UPS R3000 XR.
Note:
-B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs
and Channels)
–B23 (crated) used for air shipments of empty racks
Note: It is mandatory to use a shock pallet in order to ship racks with equipment
installed.
Not all Compaq equipment is qualified to be shipped in the Rack 10000 series.
Note:
-B21 (pallet) used to ship empty racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs
and Channels)
–B23 (crated) used for air shipments of empty racks
Rack Options for
Compaq Rack 10000 Series
Rack Blanking Panels
– Graphite (Multi)
Note: Contains one each of 1U, 2U, 3U, and 4U
panel.
253214-B26
Rack Blanking Panels
– Graphite (1U)
Note: The Rack Blanking Panels (PN
253214-B21) contains 10 each of (1U).
253214-B21
Rack Blanking Panels
– Graphite (2U)
Note: The Rack Blanking Panels (PN
253214-B22) contains 10 each of (2U).
253214-B22
Rack Blanking Panels
– Graphite (3U)
Note: The Rack Blanking Panels (PN
253214-B23) contains 10 each of (3U).
253214-B23
Rack Blanking Panels
– Graphite (4U)
Note: The Rack Blanking Panels (PN
253214-B24) contains 10 each of (4U).
253214-B24
Rack Blanking Panels
– Graphite (5U)
Note: The Rack Blanking Panels (PN
253214-B25) contains 10 each of (5U).
253214-B25
800mm Wide Stabilizer
Kit (Graphite)
Note: Supported by the Rack 10842 cabinet
only.
9000/10000 Series
Offset Baying Kit (42U)
Note: This kit can be used to connect 9000 and
10000 series racks of the same U height together. Kit contents include hardware for
connecting racks and a panel to cover the 100mm gap at the rear of the two racks.
248931-B21
Rack Options for
Compaq Rack 9000 Series
Baying/Coupling Kit
120669-B21
42U Side Panel
Note: The 42U Side Panel (PN 120670-B21)
supports the Compaq Rack 9142 and Compaq Rack 9842.
Rack Blanking Panels
(4U)
Note: The Rack Blanking Panels (PN
189453-B24) contains 10 each of (4U).
189453-B24
Rack Blanking Panels
(5U)
Note: The Rack Blanking Panels (PN
189453-B25) contains 10 each of (5U).
189453-B25
9000/10000 Series
Offset Baying Kit (42U)
Note: This kit can be used to connect 9000 and
10000 series racks of the same U height together. Kit contents include hardware for
connecting racks and a panel to cover the 100mm gap at the rear of the two racks.
1U Rack Keyboard & Drawer
(Carbon)
Note: The 1U Rack Keyboard & Drawer (PN
257054-xx1) is to be used with the Keyboards for Racks with Trackball (PN 158649-xxx).
4-Hour
On-site Service, 9-Hour x 5-Day Coverage, 3 Years (6-3 Part Number for US)
168975-002
4-Hour
On-site Service, 9-Hour x 5-Day Coverage, 3 Years (6-3 Part Number for Canada)
168975-122
4-Hour
On-site Service, 9-Hour x 5-Day Coverage, 3 Years (6-3 Part Number for EMEA)
159549-022
4-Hour
On-site Service, 24-Hour x 7-Day Coverage, 3 Years (6-3 Part Number for US)
168978-002
4-Hour
On-site Service, 24-Hour x 7-Day Coverage, 3 Years (6-3 Part Number for Canada)
168978-122
4-Hour
On-site Service, 24-Hour x 7-Day Coverage, 3 Years (6-3 Part Number for EMEA)
159550-022
Installation
& Start-up Services
Hardware
Installation (6-3 Part Number for US)
168981-002
Hardware
Installation (6-3 Part Number for Canada)
168981-122
Hardware
Installation (6-3 Part Number for EMEA)
Quote
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to server at
same time of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Win NT Operating System plus up to 2 days
start-up activity, configure print & network access services, and orientation (6-3
Part Number for U.S.)
240017-002
Pre-installation
planning; unpack equipment, install most current Compaq HW options internal to server at
same time of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Novell NetWare Operating System plus up to
2 days start-up activity, configure print & network access services, and orientation
(6-3 Part Number for U.S.)
240012-002
Server
Installation and Set-Up (Installation of the server, installation of the appropriate
service tools, check to ensure device SW and firmware is loaded and installation of the
operating system software (6-3 Part Number for EMEA)
(Hardware installation plus two days
O/S start-up activity (install, configure, network access & orientation).)
204565-022
Business
Solutions Priority Service Plan – Priority Level
9 x 5 HW,
4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for
Windows NT, Windows 2000, Professional, Server or Advanced Server Operating System, Next
Available Specialist (6-3 Part Number for U.S.)
239952-002
9 x 5 HW,
4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for
Novell NetWare Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239992-002
5 x 9
4-hour H/W, 5 x 9 2-hour O/S (NT & NetWare), Three Years (6-3 Part Number for Canada)
168982-122
5 x 9
4-hour H/W, 5 x 9 2-hour O/S (NT & NetWare), Three Years (6-3 Part Number for EMEA)
179838-022
Business
Solutions Priority Service Plan – Priority 24 Level
24 x 7
HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr response for
Windows NT, Windows 2000, Professional, Server or Advanced Server Operating System, Next
Available Specialist (6-3 Part Number for U.S.)
239954-002
24 x 7
HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr response for
Novell NetWare Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239994-002
7 x 24
4-hour H/W, 7 x 24 2-hour O/S (NT & NetWare), Three years (6-3 Part Number for EMEA)
179843-022
Business
Solutions Priority Service Plan – Priority Plus Level
7 x 24
4-hour H/W, 7 x 24 1-hour O/S (NT & NetWare), SPS account review, Three Years (6-3
Part Number for Canada)
168984-122
Business Solutions Priority
Service Plan – Priority Silver
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday –
Friday, 8AM – 5PM local time, 2-hr response after hours for Windows NT, Windows 2000,
Professional, Server or Advanced Server Operating System, Technical Account Manager,
Technical Newsletter, SW activity review, proactive patch notification, 1 System
Healthcheck per year (6-3 Part Number for U.S.)
239956-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Subsequent System Support for Windows NT,
Windows 2000, Professional, Server or Advanced Server Operating System (6-3 Part Number
for U.S.)
239958-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday –
Friday, 8AM – 5PM local time, 2-hr response after hours for Novell NetWare Operating
System, Technical Account Manager, Technical Newsletter, SW activity review (6-3 Part
Number for U.S.)
239996-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Silver Subsequent System Support for Novell NetWare
Operating System (6-3 Part Number for U.S.)
239998-002
Business Solutions Priority
Service Plan – Priority Gold
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Gold Software Support, 30 minute response (critical),
1-hr response (non-critical), for Windows NT, Windows 2000, Professional, Server or
Advanced Server Operating System, Technical Account Manager, Technical Newsletter, SW
activity review, proactive revision management, Upgrade impact planning, 2 System
Healthcheck per year (6-3 Part Number for U.S.)
239960-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Gold Subsequent System Support for Windows NT, Windows
2000, Professional, Server or Advanced Server Operating System (6-3 Part Number for U.S.)
239962-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Gold Software Support, 30 minute response (critical),
1-hr response (non-critical), for Novell NetWare Operating System, Technical Account
Manager, Technical Newsletter, SW activity review, Upgrade impact planning (6-3 Part
Number for U.S.)
240000-002
24 x 7 HW, 4-hr
response, Named HW engineer; 24 x 7 Gold Subsequent System Support for Novell NetWare
Operating System (6-3 Part Number for U.S.)
240002-002
Business Solutions Priority
Service Plan – Priority Gold Executive
24 x 7 HW, 2-hr
response, Named HW engineer; 24 x 7 Gold Software Support, 30 minute response (critical),
1-hr response (non-critical), for Windows NT, Windows 2000, Professional, Server or
Advanced Server Operating System, Technical Account Manager, Technical Newsletter, SW
activity review, proactive revision management, Upgrade impact planning, 2 System
Healthcheck per year (6-3 Part Number for U.S.)
239964-002
24 x 7 HW, 2-hr
response, Named HW engineer; 24 x 7 Gold Subsequent System Support for Windows NT, Windows
2000, Professional, Server or Advanced Server Operating System (6-3 Part Number for U.S.)
239966-002
24 x 7 HW, 2-hr
response, Named HW engineer; 24 x 7 Gold Software Support, 30 minute response (critical),
1-hr response (non-critical), for Novell NetWare Operating System, Technical Account
Manager, Technical Newsletter, SW activity review, Upgrade impact planning (6-3 Part
Number for U.S.)
240004-002
24 x 7 HW, 2-hr
response, Named HW engineer; 24 x 7 Gold Subsequent System Support for Novell NetWare
Operating System (6-3 Part Number for U.S.)
240006-002
Business Solutions Priority
Service Plan – Priority Premier Level
7 x 24 2-hour H/W, 7
x 24 1-hour O/S (NT & NetWare), SPS Account Review, Proactive Management Review, named
S/w rep, Three Years (6-3 Part Number for Canada)
168985-122
Business Solutions Priority
Service Plan – Priority Executive Premier Level
7 x 24 2-hour H/W, 7
x 24 30-minute O/S (NT & NetWare), SPS Account Review, Proactive Management Review,
named S/w rep, Three Years (6-3 Part Number for Canada)
Standard Memory 1024-MB buffered SDRAM DIMM memory (two kits of 2 x 256-MB DIMMs)
Standard Memory
Plus Optional Memory
Up to 13,312-MB of SDRAM DIMM memory is available with the installation of optional
SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 16,384-MB of SDRAM DIMM memory is available with the removal of standard memory
and the installation of optional SDRAM DIMM memory expansion kits.
Note: 16 slots with 2
per bank. Up to 16-GB memory total. Memory must be added in banks of two DIMMs. Charts do
not represent all possible configurations.
Memory
Slot
1
2
3
4
5
6
7
8
Standard
1024 MB
256 MB
256 MB
256 MB
256 MB
Empty
Empty
Empty
Empty
Optional
13,312 MB
256 MB
256 MB
256 MB
256 MB
Empty
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Memory
Slot
9
10
11
12
13
14
15
16
Standard
1024 MB
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Optional
13,312 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from Compaq:
Compaq ProLiant ML750 900
MHz-2MB Model 2048 & 700 MHz-2MB Model 4-2048
Standard Memory 2048-MB buffered SDRAM DIMM memory (two kits of 2 x 512-MB DIMMs)
Standard Memory
Plus Optional Memory
Up to 14,336-MB of SDRAM DIMM memory is available with the installation of optional
SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 16,384-MB of SDRAM DIMM memory is available with the removal of standard memory
and the installation of optional SDRAM DIMM memory expansion kits.
Note: 16 slots with 2
per bank. Up to 16-GB memory total. Memory must be added in banks of two DIMMs. Charts do
not represent all possible configurations.
Memory
Slot
1
2
3
4
5
6
7
8
Standard
2048 MB
512 MB
512 MB
512 MB
512 MB
Empty
Empty
Empty
Empty
Optional
14,336 MB
512 MB
512 MB
512 MB
512 MB
1024 MB
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Memory
Slot
9
10
11
12
13
14
15
16
Standard
2048 MB
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Optional
14,336 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from Compaq:
To
drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML750
- Click on: "Power Calculator" link (You may need to
scroll down to see it.)
2
Processors, 2 DIMMs, 2 Power Supplies, no drives, 1 I/O card
Input
Requirements (per power supply)
Rated Input Voltage
100 to 120 VAC/200 to
240 VAC
Rated Input Frequency
50 to 60 Hz
Input Power
810W @ 110 VAC/1660W @
220 VAC
Rated Input Current
9.5A
BTU Rating
(Maximum output)
(Note that the maximum heat output by the server is equal to the electrical power input.)
2623 Watts [8959
BTU/hr]
(System is configured to draw maximum power)
Power
Supply Output Power
(per power supply)
Rated Steady-State
Power
Maximum Peak Power
500W/1150W
(lowline/highline)
Temperature
Range
Operating
50° to 95° F at sea
level, altitude de-rating of 1.8° F per 1,000 feet to 10,000 feet (10° to 35° C at sea
level, altitude de-rating of 1° C per 300 m to
3,000 m)
Non-operating
-20° to 140° F/
-29° to 60° C
Shipping
-22° to 122° F/
-30° to 50° C
Relative
Humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 90%
Maximum Wet Bulb
Temperature
101.7°F/38.7°C
Power Supply
1150/500W, Hot Plug
Redundant
(2 standard)
Two or Three Redundant
Power Supplies
(optimized to provide full redundancy at 220 volts)
Input
Specifications
Normal Line Voltage
100 to 120 VAC/200 to
240 VAC
Range Input Line
90 to 132 VAC/180 to
265 VAC
Frequency Range
47 to 63 Hz
Power Factor
0.95
Input Current
8 A at 100 VAC/10 A at
200 VAC
Inrush Current
< 70 A at 132 VAC
(cold start)
Holdup Time
20 ms from zero
crossing at 120 VAC
General
Specifications
Full Output Rating
104°F to 40°C and
5,000 ft/1,500 m
89.6°F to 32°C and
10,000 ft/3,000 m
(derate linearly)
Minimum Load
1 A on + 5 V output; 1 A on + 12 V output;
0.5 A on + 3.3 V output
Ambient Temperature
Range
Operating
50° to 104° F/
10° to 40° C
Storage
-40° to 149° F/
-40° to 65° C
Dielectric
Voltage Withstand
Input to Output
3000 VAC/min
Input to Ground
1500 VAC/min
Input Transient
Susceptibility
Common and
Differential Mode (superimposed on AC line)
2500 V, 1µs, damped
sinusold 600 V, 10 µs pulse
Differential Mode
20% step change in AC
input voltage
1.44-MB
Diskette Drive
Diskette Size
3.5 in
LED Indicators (front
panel)
Green
Read/Write Capacity
per
Diskette (high/low density)
Note: Drives Supported (maximum) is based on use of StorageWorks
Enclosure 4200/4300 family (14 hard disk drive enclosure).
Cache
256, 128,
64 or 32-MB battery-backed read-write
RAID Support
0, 1, 1+ 0, 5, Advanced Data Guarding
Note: For customers who have purchased the SA-5304/128 a quick
firmware upgrades to enable the technology will be available from http://www.compaq.com/smartarray.
Note: RAID Support: Advanced Data Guarding (RAID ADG) is
available with 128-MB versions of the SA-5300 only.
Logical Drives (maximum)
32
Online
Configuration
Yes
Online Capacity
Expansion
Yes
Logical Drive
Capacity Extension
Yes
Online Stripe Size
Migration
Yes
Online RAID Level
Migration
Yes
Online Spare
Support
Yes
Automatic Data
Recovery
Yes
Drive
Roaming
Yes
Redundant
Controllers
No
Smart
Array 4250ES Controller
Data Compatible
with all Smart Array Controllers
Yes
Instant Upgrades to
other Smart Array Controllers
Yes
Consistent Software
Manageability Tools
Yes
PCI Bus
64 bit, 33
MHz
PCI Peak Data
Transfer Rate
266 MB/s
SCSI Protocols
Supported
Ultra2,
Wide-Ultra
SCSI Peak Data
Transfer Rate
120 MB/s
total, 40 MB/s per channel
Channels
3
SCSI
Ports (external/internal)
0/3
Drives
Supported (maximum)
21
Note: Drives Supported (maximum) is based on use in ProLiant
ML750 (21 internal disk drives).
Cache
64-MB
battery-backed read-write
RAID Support
0, 1, 1+ 0, 4, 5
Logical Drives (maximum)
32
Online
Configuration
Yes
Online Capacity
Expansion
Yes
Logical Drive
Capacity Extension
Yes
Online Stripe Size
Migration
Yes
Online RAID Level
Migration
Yes
Online Spare
Support
Yes
Automatic Data
Recovery
Yes
Drive
Roaming
Yes
Redundant
Controllers
Yes
Smart
Array 532 Controller
Data Compatible
with all Smart Array Controllers
Yes
Instant Upgrades to
other Smart Array Controllers
Yes
Consistent Software
Manageability Tools
Yes
PCI Bus
64 bit, 66
MHz
PCI Peak Data
Transfer Rate
533 MB/s
SCSI Protocols
Supported
Ultra3,
Ultra2
SCSI Peak Data
Transfer Rate
160 MB/s
Channels
2
SCSI Ports (external/internal)
1/1
Drives Supported (maximum)
14 or 21
if internal channel connected to an internal drive bay
Note: Drives Supported (maximum) is based on use of StorageWorks Enclosure
4300 family (14 hard disk drive enclosure).
Cache
32-MB
cache engine
RAID Support
0, 1, 1+ 0, 5
Logical Drives (maximum)
32
Online
Configuration
Yes
Online Capacity
Expansion
Yes
Logical Drive
Capacity Extension
Yes
Online Stripe Size
Migration
Yes
Online RAID Level
Migration
Yes
Online Spare
Support
Yes
Automatic Data
Recovery
Yes
Drive Roaming
Yes
Redundant
Controllers
No
NC3134
Fast Ethernet NIC 64 PCI Dual Port 10/100
Network Interface
10Base-T/100Base-TX
Compatibility
IEEE
802.3/802.3u compliant
Data Transfer
Method
64-bit/66-MHz
bus-master PCI, compatible with 64/33, 32/66, and 32/33
Network Transfer
Rate
10Base-T
(Half-Duplex),
10Base-2
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX
(Half-Duplex)
100 Mb/s
100Base-TX
(Full-Duplex)
200 Mb/s
Connector
Dual RJ-45
I/O Address and
Interrupt
Automatic
Configuration
Cable Support
10Base-T
Categories 3, 4 or 5
UTP (2 or 4 pair); up to 328 feet
(100 meters)
100Base-TX
Category 5 UTP (2
pair); up to 328 feet (100 meters)
OS Driver Support
Microsoft
Windows 2000 and NT 4.x
Novell
NetWare 4.x and 5.x
Linux
SCO
OpenServer 5.x
SCO
UnixWare 7.x
OS/2 Warp
Server
Solaris
v.8
64-bit/66-MHz
Single Channel Wide Ultra3 SCSI Adapter
Drives Supported
Up to 14
SCSI devices
Storage Capacity
254.8 GB
Data Transfer
Method
64-bit/66-MHz
PCI bus-master
Maximum SCSI
Channel Transfer Rate
160 MB/s
per channel
Maximum Transfer
Rate per PCI Bus (peak)
532 MB/s
per channel
SCSI Protocols
Wide
Ultra3 SCSI
Wide
Ultra2 SCSI
Wide-Ultra
SCSI-3
Fast-Wide
SCSI-2
Fast
SCSI-2
Electrical Protocol
Low
Voltage Differential (LVD)
SCSI Termination
Active
Termination
External SCSI
Connectors
One 68-pin
Wide-Ultra SCSI-3 connector
Internal SCSI
Connectors
Two 68-pin
Wide-Ultra SCSI-3 connectors (one LVD and one SE)
US Site
DL Quickspecs
Search:
327281-B21
© 2012 Canada PartsDirect