Supporting up to six (6) HP 300GB 15K SAS 3.5 SP HDD
At A Glance
Processor:
Quad-Core Intel® Xeon® processor 5300
sequence
Dual-Core Intel® Xeon® processor 5000 and 5100 sequence
Intel® 5000V chipset
667 MHz, 1066 MHz or 1333MHz Front Side Bus
Memory:
PC2-5300 Fully Buffered
DIMMs (DDR2-667)Memory
SAS/SATA - 4 sockets, 1 GB standard, 8
GB maximum
SATA - 4 sockets, 512 MB, 8 GB maximum
Storage Controller:
HP Embedded SATA RAID
Controller
HP Smart Array E200/128 BBWC Controller
Internal Drive Support:
Internal SAS storage capacity
of up to 1.8TB (6 x 300GB SAS drives)
Internal SATA storage capacity of up to
4.5TB (6 x 750GB SATA drives)
Supports up to 6 SAS/SATA hard drives via
HBA or RAID Controller
Network Controller:
Embedded HP NC7781 Gigabit Server Adapter 10/100/1000
WOL (Wake on LAN)
Expansion
Slots:
Six expansion slots: Three
(3) PCI-X (64-bit/100MHz), 2 PCI-Express (x4\x8), and 1 PCI (32-bit/33MHz).
One slot designated for optional HP ProLiant Lights-Out 100 Remote
Management card
USB Ports:
Seven USB 2.0 ports:-
3 rear, 2 front, 2 Internal(1 standard and 1HP 5-pin)
Redundancy:
One 650W Power Supply
Form Factor:
5U Tower Models. Rack
models via optional rack mounting kit
Management:
Optional HP ProLiant Lights-Out
100 Remote Management Card
Deployment/Serviceability:
Easy chassis entry and
component access
Warranty:
Protected by HP Services and a worldwide network
of HP Authorized Channel Partners, including a one-year, limited
warranty, Next Business Day 1, year on-site limited Global warranty.
Certain restrictions and exclusions apply. SATA hard drives have
a one year warranty.
NOTE: Future
upgradeable to Xeon® Series 5300 Quad-Core, or 5100 Dual-Core processors
(Please contact your regional sales support to determine quad core upgradeability.
Some of the earlier shipping models may not support this upgrade)
Chipset
Intel® 5000V Chipset
Memory
Type
PC2-5300 Fully Buffered DIMMs
(DDR2-667)
Standard for SATA Models
512 MB
Standard for SAS/SATA Model
1 GB
Maximum
8 GB
Network
Controller
Embedded HP NC7781
Gigabit Server Adapter 10/100/1000 WOL (Wake on LAN)
Expansion
Slots #
Technology
Bus
Width
Connector
Width
Bus
Number*
Form
Factor
Notes
1
PCI-32
32 bit
NA
Dynamic
Full
Length, full height
2
PCI-X
64 bit
NA
Dynamic
Full
Length, full height
3
PCI-X
64 bit
NA
Dynamic
Full
Length, full height
4
PCI-X
64
bit
NA
Dynamic
Full
Length, full height
5
PCIe
X4
X8
Dynamic
Full
Length, full height
6
PCIe
X4
X8
Dynamic
Full
Length, full height
Storage Controller
HP Embedded SATA RAID Controller
or HP 8 Internal Port SAS Host Bus Adapter with RAID
Storage
Diskette Drive
None ship standard
1.44 MB USB Diskette Drive Option available
Optical Drive
48x IDE (ATAPI) CD-ROM Drive
Hard Drives
None ship standard
SAS and SATA HDD options are available
Maximum Internal
Storage
SATA
4.5TB (6 x 750GB) SATA (With
standard SATA controller)
SAS
1.8TB (6 x 300GB) SAS (With
optional SAS controllers)
NOTE: Support
for a single logical drive limited to 2TB. NOTE: Information below pertains to SATA configuration:
- In BIOS revisions prior to 11/03/2006, the default configuration for SATA
models will not recognize when more than four drives are installed while
running Microsoft Windows operating system. To recognize all six drives,
AHCI mode has to be enabled and SATA AHCI driver installed. For further
information on how to enable AHCI mode, please refer to the RTF card that
is shipped with the server or posted on http://www.hp.com.
- When configuring RAID using the embedded SATA RAID controller, two arrays
have to be set up to recognize all six drives.
1 (10/100 via optional Lights-Out
100 Remote Management Card)
Graphics
Integrated 2MB SRAM video
Form Factor
Tower (5U). Rack mounting available
via rack mount option kit (P/N 408697-B21)
Industry Standard
Compliance
ACPI V2.0 compliant
PCI 2.3 compliant
PXE Support
WOL Support
Microsoft® Logo certifications
Manageability
Optional HP ProLiant Lights-Out
100 Remote Management Card
Embedded IPMI standard reporting
Security
Power-on password
Setup password
Diskette boot control
Server Power Cords
One Lowline NEMA power cord
Power Supply
One 650 W Power, Non-hot plug,
non-redundant
System Fans
2 - Non-hot plug, Non-redundant
system fans
OS
Support
Microsoft Small
Business Server 2003 (32 and 64 bit) Microsoft Windows 2003 Server, Standard
Edition (32 and 64 bit) Microsoft Windows 2003 Server, Web Edition Microsoft
Windows 2003 Server, Enterprise Edition (32 and 64 bit) Microsoft Windows
2000 Server Netware 6.5 SCO OpenServer Legend 6.0 SCO Unixware 7.1.4
Red Hat Enterprise Linux SUSE Linux Enterprise Server
NOTE: For more complete
and up-to-date information of all supported OSes for ProLiants, certification
information and how to buy server operating systems from HP please visit the OS
product site at: http://h18004.www1.hp.com/products/servers/software/OEM.html.
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and storage
products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging and custom packaging
to meet customer needs. HP products supported through Factory Express
include a wide array of servers and storage: HP Integrity, HP ProLiant
& HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well
as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable
network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eCo-Enterprise Configurator now provides factory default racking
for our HP hardware portfolio. This approach is aligned with our strategic
direction to meet the needs and expectations of our valued customers.
If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance.
Server Management Stand Alone Software
Product
HP Systems Insight Manager
HP Systems Insight Manager (HP SIM) provides
web server discovery, association, and launch
Core Infrastructure Management
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications
is a web-based email subscription service that provides software and driver
change notifications for ProLiant products. Sign up at http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
Service and Support
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and repair is available for one year from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements.
HP Care Pack Services provide total care and support expertise with committed
response designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server that are purchased at the same time or afterward
and internal to the enclosure. It also includes the 22" and smaller
external monitors and tower UPS options up to 3kVA. These items will be
covered at the same service level and for the same coverage period as
the server. Coverage of UPS Battery is not included and standard warranty
terms & conditions apply. For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed
within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a ProLiant server support offer to help you speedily
deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation,
maintenance and management.
Support Service -3 Year, 9x5 Next Business Day coverage, excluding
HP holidays only
Deployment Service - Hardware Installation only
Enhanced Service - Optimize service level to increase IT performance
and availability
Support Service - 3 Year 13x5 Same Business Day, 4-Hour response
coverage
Deployment Service - Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux
O/S per the Customer Description and/or Data Sheet. To be delivered on
a scheduled basis 8am-5pm, M-F, excl. HP holidays.
Embedded HP NC7781
Gigabit Server Adapter 10/100/1000 WOL
Storage
Controller
HP Embedded SATA
RAID Controller
Hard
Drive
None ship standard
Internal Storage
4.5TB
(6 x 750GB) SATA (With standard SATA controller and 6 optional HDD)
Optical Drive
48x
CD-ROM
Form Factor
Tower
standard; 5U Rack via optional rack mounting kit
NOTE:
In BIOS revisions prior to 11/03/2006, the default configuration for SATA
models will not recognize when more than four drives are installed while running
Microsoft Windows operating system. To recognize all six drives, AHCI mode has
to be enabled and SATA AHCI driver installed. For further information on how to
enable AHCI mode, please refer to the RTF card that is shipped with the server
or posted on: http://www.hp.com. NOTE:
When configuring RAID using the embedded SATA RAID controller, two arrays
have to be set up to recognize all six drives. NOTE: Only hot plug
drives are supported on the ML150 G3; these hot plug drives, when installed on
Non-hot plug models, will not have hot plug functionality. NOTE: This
section lists some of the steps required to configure a Factory Integrated Model.
To ensure only valid configurations are ordered, HP recommends the use of an HP
approved configurator. Contact your local sales representative for additional
information.
The
ProLiant Smart Buy program offers a collection of promotional server and option
products that are configured with SMB in mind, offered at discounted prices, and
positioned for quick delivery. Smart Buy server offers are available for a limited
time only. For a full listing of ProLiant Smart Buys available for all server
families, visit: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf.
NOTE: This section lists some of the
steps required to configure a Factory Integrated Model. To ensure only
valid configurations are ordered, HP recommends the use of an HP approved
configurator. Contact your local sales representative for information
on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above.
Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express
Server Configuration Level 1.
Step
1: Base Configuration (Select only one model from the following selections)
Models
HP ProLiant ML150 G3 Non-hot Plug
SATA CTO Chassis
403111-B21
Factory Integrated Models ship
with:
Embedded HP
NC7781 Gigabit Server Adapter 10/100/1000 WOL
Single 650W
Power Supply
Tower 5U Form
Factor
HP ProLiant
ML150 G3 Hot Plug SATA CTO Chassis
403112-B21
Factory Integrated Models ship
with:
Embedded HP NC7781 Gigabit Server
Adapter 10/100/1000 WOL
Single 650W Power Supply
Tower 5U Form Factor
Step
2: Choose Required Options (Select only one option from each category unless
otherwise noted)
Processors
Quad-Core
Processor Option Kits
Quad-Core Intel® Xeon®
processor E5335 (2.00 GHz, 80 W, 1333 MHz FSB) NOTE: If 2 processors are desired, select one 437905-B21and one 437905-B21
437905-B21
Quad-Core
Intel® Xeon® processor E5310 ( 1.6 GHz, 1066 FSB, 80W) NOTE: If 2 processors are desired, select one 437903-B21and one 437903-B21
437903-B21
Quad-Core
Intel® Xeon® processor E5320 ( 1.86 GHz, 1066 FSB, 80W) NOTE: If 2 processors are desired, select one 436460-B21 and one 436460-B21
436460-B21
Dual-Core
Processor Option Kits
Dual-Core Intel® Xeon®
processor 5110 (1.6 GHz, 1066 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417555-B21and one 417555-B21
417555-B21
Dual-Core Intel® Xeon®
processor 5120 (1.86 GHz, 1066 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417556-B21and one 417556-B21
417556-B21
Dual-Core Intel® Xeon®
processor 5130 (2.0 GHz, 1333 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417557-B21and one 417557-B21
417557-B21
Dual-Core
Intel® Xeon® processor 5140 (2.33 GHz, 1333 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 417558-B21and one 417558-B21
417558-B21
Dual-Core
Intel® Xeon® processor 5150 (2.66 GHz, 1333 FSB, 65W), FIO NOTE: If 2 processors are desired, select one 418226-B21and one 418226-B21
NOTE: For the
installation of Windows and other OS's, a floppy drive may be required to complete
driver installation. A USB drive key may not work to complete driver installation.
NOTE:
SAS hard drives require a SAS HBA or Smart Array Controller.
NOTE:
Only hot plug drives are supported on the ML150 G3; these hot plug drives,
when installed on Non-hot plug models, will not have hot plug functionality.
Step 3: Choose Additional
Options for Factory Integration
NOTE:
For additional options, please refer to the "Options" section
below. Some options may not be available for factory integration. Please
contact an HP sales representative for additional information.
Operating Systems
Pre-install Microsoft Windows
2003 Standard (English)
409167-B21
Pre-install
Microsoft Windows 2003 Small Business Server, Premium Edition (English)
NOTE: For the
installation of Windows and other OS's, a floppy drive may be required to
complete driver installation. A USB drive key may not work to complete driver
installation.
NOTE: SAS hard
drives require a SAS HBA or Smart Array Controller.
NOTE: Only hot
plug drives are supported on the ML150 G3; these hot plug drives, when installed
on Non-hot plug models, will not have hot plug functionality.
NOTE: The purchase
of SAS HBA or array controller is required.
HP ML150G3 1-PORT SATA RAID Cable NOTE: This cable is required for each additional SATA hard drive
413748-B21
HP SAS/SATA 4 in 1 to 4 in Cable NOTE: This cable is required when adding either the HP 8 Internal
Port SAS HBA with RAID or the HP Smart Array E200 on a hot-plug SATA model
or SC44GE HBA.
438160-B21
HP Internal SAS/SATA 4-Port Cable NOTE: This cable is required when adding either the HP 8 Internal
Port SAS HBA with RAID or the HP Smart Array E200 on a non hot-plug SATA
model
430479-B21
NOTE:
Hot plug SATA servers come with a hot plug backplane, making them hot
plug ready. For full hot plug capability on the hot plug SATA models, a
hot plug controller ( 347786-B21) must also be purchased
Communications
HP NC110T PCI Express Gigabit
Server Adapter NOTE: Does not support Windows 2000.
434905-B21
HP NC360T PCI Express Dual Port
Gigabit Server Adapter
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
USB
Options
HP USB 2-Button Optical
Scroll Mouse (Carbonite/Silver)
Service
and Support Offerings (HP Care Pack Services)
Extended
Care - Minimum recommended service support offer designed to ensure customers
have access to expert assistance, whenever they need it. Next
Business Day On-Site Service, 9-Hour x 5-Day Coverage, 3 Years, Electronic
U8184E
Committed
Care - Cost-effective service options designed to extend HP Services committed
response and guaranteed fix times, designed to speed problem resolution. 4-Hour On-Site Service -13-Hour x 5-Day Coverage, 3 Years, Electronic
U8192E
Committed Response - Highest
HP Support service level recommend to help increase IT performance and availability
with comprehensive, consistent hardware and software services 4-Hour On-Site
Service - 24-Hour x 7-Day Coverage, 3 Years, Electronic
U8193E
Deployment
Services - HP Installation and Start Up services designed to take time, risk,
and worry out of the deployment of ProLiant servers - and free customers people
to focus on what they do best, their business. Hardware Installation,
Electronic (install services)
NOTE:
Memory configurations listed do not apply to "Factory Integrated
Models".
HP ProLiant ML150 Generation 3 Server
Standard Memory
512 MB of PC2-5300 Fully Buffered DIMMs (DDR2-667)
Standard Memory Plus Optional Memory
Up to 5120 MB memory is available with the optional installation of PC2-5300
Fully Buffered DIMMs (DDR2-667) Memory kits.
Standard Memory Replaced with Optional Memory
Up to 8192 MB of memory is available with the removal of the standard
512-MB of memory and the optional installation of PC2-5300 Fully Buffered
DIMMs (DDR2-667) Memory kits.
NOTE: Charts do
not represent all possible memory configurations. Memory must be populated
in one of the following ways: Slot 1 only; slots 1 and 3 only (pairs must
be of the same size); or slots 1, 2, 3, and 4 (pairs must be of the same
size and in the example below with slots 1 and 3 the same and slots 2 and
4 the same)
Memory
Slot
1
2
3
4
Standard
512 MB
512 MB
Empty
Empty
Empty
Optional
5120 MB
512 MB
2048 MB
512 MB
2048 MB
Maximum
8192 MB
2048 MB
2048 MB
2048 MB
2048 MB
NOTE:
Please make sure socket 1 is populated, otherwise the system will not
boot, also please make sure the DIMM socket 1,3 and 2,4 should be the same
size, otherwise the capacity will not be correct.
Six Hot Plug SAS/SATA or
Six Non-Hot Plug SATA Drive Bays
Drive
Support
Quantity Supported
Position Supported
Controller
Removable Media
IDE CD-ROM Drive
Up
to 2
1
or 2
Integrated IDE
Hard Drives
SAS
(Hot Plug Drives)
Quantity
Supported
Position
Supported
Controller
300GB
SAS 15K SPP SP 146GB SAS 15K SPP SP 72GB SAS 10K SPP SP 36GB SAS 10K
SPP SP
Up
to 6
3
(Drive slots 1-6)
HP
8 Internal Port SAS Host Bus Adapter with RAID Optional Smart Array E200
Hard Drives
SATA
Quantity Supported
Position Supported
Controller
750 GB 500 GB 250 GB 160 GB 80 GB
Up
to 6
3
(Drive slots 1-6)
Integrated
6 port SATA Adapter Optional HP 8 Internal Port SAS Host Bus Adapter with
RAID
NOTE:
In order to realize Hot-Plug functionality in the HP SATA Models of the ML150
G3, the 8 Port Internal Port SAS Host Bus Adapter with RAID (P/N 347786-B21) must
be purchased and installed.
Maximum Storage Capacity - SAS Models
Internal
1.8TB
(6 x 300 GB SAS hard drives)
Total
1.8TB
(6 x 300 GB SAS hard drives)
Maximum
Storage Capacity - SATA Models
Internal
4.5TB (6 x 750 GB
SATA drives)
Total
4.5TB
(6 x 750 GB SATA drives)
Tape Drives
NOTE:
A SCSI controller needs to be purchased to operate internal SCSI devices in the
SATA Models. NOTE: For an up-to-date listing of the latest O/S Support
details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/north_america/10233.html
Position Supported
Controller
Controller/HBA Option Kit Part Number
Internal USB Tape Drives
DAT 72 USB DAT 160 USB
2
USB 2.0 port
N/A
External USB Tape Drives
DAT 72 USB DAT 160 USB
External
USB 2.0 port
N/A
Internal SCSI Tape Drives
DAT 72 DAT 160 LTO-2 Ultrium 448 LTO-3 Ultrium 920
2
64-Bit/133-MHz
Single Channel Ultra320 SCSI HBA G2
17.83 in x 8.62 in x 25.59 in
(45.3 x 21.9 x 65.0 cm)
Weight (approximate)
69 lb (31.3 kg)
Input Requirements
(per power supply)
Range Input Voltage
90 to 135 VAC/180 to 265 VAC
Normal Line Voltage
100 to 120/200 to 240 VAC
Line Frequency
50 to 60 Hz
Rated Input Current
load 11.6A at 115VAC, 5.5A at
220VAC
BTU Rating
2218 BTU
Power Supply Output
Power
(per power supply)
Rated Steady-State Power
600W
Maximum Peak Power
660W
Temperature Range*
Operating
50° to 93° F (10°
to 35° C)
Shipping
-40° to 140° F (-40°
to 60° C)
Relative Humidity
(non-condensing)
Operating
10% to 90%
Non-operating**
10% to 95%
Acoustic Noise
Idle
(Fixed Disk Drives Spinning)
38 dBA
L WAd (BELS)
5.5
Operating
(Random Seeks to Fixed Disks)
43 dBA
L WAd (BELS)
6.0
*All temperature ratings shown are for sea level. An altitude derating
of 1° C per 304.8 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) is
applicable. No direct sunlight allowed. Upper operating limit is 3,048m
(10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000
ft) or 30.3KPa/4.4 psia. System performance may be reduced if operating
with a fan fault or above 30C.
**Storage maximum humidity of
90% is based on a maximum temperature of 45° C (113° F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
48X Max IDE (ATAPI) CD-ROM Drive
Disk
Applicable
Disk
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo
CD (Single and Multi-session)
Mixed
Mode (Audio and Data combined)
CD-R
Capacity
540
MB (Mode 1, 12 cm)
650
MB (Mode 2, 12 cm)
Block
Size
Mode 1
2,048
bytes
Mode 2
2,340
bytes, 2,336 bytes
CD-DA
2,352
bytes
CD-XA
2,328
bytes
Interface
IDE (ATAPI)
Access Times
(typical)
Random
<100
ms
Full-Stroke
<150
ms
Data
Transfer Rate
Sustained
3000 to 7200 KB/s (20X to 48X)
Burst
150
KBps to 7,200 KBps
Bus
Rate
16.7 MBp
Cache Buffer
128 KB
Start-up Time (typical)
<
7 seconds
Stop Time
<
4 seconds
Laser Parameters
Type
Semiconductor Laser GaA1As
Wave Length
780
± 25 nm
Operating
Conditions
Temperature
41° to 113° F (5°
to 45° C)
Humidity
10% to 80%
Dimensions
(HxWxD, maximum)
1.7
x 5.85 x 8.11 in (42.9 x 150 x 208 cm)
Weight
2.09
lb (0.95 kg)
HP 8 Internal Port SAS Host Bus Adapter with RAID (SAS Model only)
Dimensions (excluding bracket)
6.6 x
2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm)
Disk
Drive and Enclosure Protocol Support
3
Gbps SAS (Serial Attached SCSI) 1.5 Gbps SATA (Serial Advanced Technology
Attachment)
Architecture
64-bit
SAS
Connectors
2 internal
SFF8484 x4 Wide SAS Connectors 12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
Data Transfer Method
64-bit
wide, PCI-X 133 MHz (1 GB/s maximum bandwidth)
PCI
Bus Speed
PCI-X-133 and
3.3 volt PCI compatibility only
PCI
PCI-X and 3.3 volt PCI compatibility
only
Simultaneous
Drive Transfer Ports
2
x4 Wide SAS Connectors
Port
Transfer Rate
12 Gb/s
per x4 Wide SAS Port (4 x 3 Gb/s)
Software
upgradeable Firmware
Yes
Maximum Capacity
576GB
(8 x 72GB)
Memory
Addressing
64-bit, supporting
servers memory greater than 4 GB
Logical
Drives Supported
Up to 2 Logical
Volumes Up to 10 drives total in all RAID volumes Up to 2 Drives per RAID
1 Up to 8 Drives per RAID 0
RAID
Support
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable
Firmware
4-MB flashable
ROM
Disk Drive and
Enclosure Protocol Support
3
Gbps SAS and 1.5 Gbps SATA
Embedded HP NC7781 Gigabit Server Adapter (embedded) 10/100/1000 WOL
(Wake on LAN)
Network Interface
Ethernet
Standards: IEEE 802.3, 802.3u, 802.3ad, and 802.3ab, 802.1x, 802.1Q and 802.1p
Data Transfer Method
PCI
Network Transfer Rate
10/100/1000
Mbps, Half- and full-duplex
Auto-negotiated
speeds of 10/100/1000 Mbps in both half and full duplex
Connector
RJ-45
connector
Cable Support
Category
5 or higher UTP wiring
HP Embedded SATA RAID Controller
Dimensions
N/A
(embedded)
Disk Drive
and Enclosure Protocol Support
1.5
Gbps SATA
Architecture
64-bit
SAS Connectors
6
internal x1 SATA connectors
Software
Upgradeable Firmware
Yes
Maximum Capacity
1TB
Memory Addressing
6
GB (maximum)
Logical
Drives Supported
2
(maximum)
RAID Support
RAID
1 (Mirroring) RAID 0 (Striping)
Environment-friendly Products and Approach
End-of-life
Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
US Site
DL Quickspecs
Search:
397409-B21
© 2012 Canada PartsDirect