Integrated Compaq NC3134 Fast Ethernet NIC 64 PCI
Dual Port 10/100 in a slot, upgradeable to Gigabit
Internal Hot Plug Drive Storage of 584.2 GB (4 x
1" 146.8-GB Ultra320 hard drives)
ROM-Based Setup Utility (RBSU)
Robust set of hot plug and redundant features including
PCI/PCI-X Hot Plug, hot plug drive bays, redundant hot plug fans and
power supplies and support for ECC memory, redundant NICs, ASR-2
Remote-Flash Redundant ROM
Protected by HP Services, including a three-year,
Next Business Day on-site, limited, Global warranty and extended Pre-Failure
Warranty that covers processors, memory and disk drives — Certain restrictions
and exclusions apply. Consult the Customer Support Center at 1-800-345-1518
for details.
Integrated Smart Array Controller supports (Ultra2 or Ultra3 hard drives at Ultra2 speed) (One Internal Channel for RAID Capability for internal drives and one External Channel for tape support only)
NOTE:
The Integrated Smart Array Controller is embedded on the system board.
Optional support for Ultra3 storage controller in an I/O slot
Storage
Diskette Drives
Integrated 1.44
MB Floppy Drive
CD-ROM
Integrated 24x IDE
CD-ROM drive Low-Profile
Hard Drives
None
Maximum Internal
Storage
587.2 GB (4 x 146.8
GB Ultra320 1" Drives) (internal hot plug cage only)
Interfaces
Parallel
1
Serial
2
Pointing Device
(Mouse)
1
Graphics
1
Keyboard
1
SCSI Tape Port (VHDCI)
1
Network RJ-45
2
Graphics
Integrated 1280 x 1024 x 256 colors PCI Video controller with 2 MB of video SDRAM memory
Form
Factor
7U Rack Form Factor;
Ships with sliding rack rails and cable management arm; Standard 19 in (48.3
cm) rack-mountable
ProLiant
Essentials Foundation Pack Software
Insight
Manager7
Insight
Manager 7 helps maximize system uptime and performance and reduces the cost of
maintaining the IT infrastructure by providing proactive notification of problems
before those problems result in costly downtime and reduced productivity. Insight
Manager 7 is easy to set up and provides rapid access to detailed fault and performance
information gathered by the Management Agents. One-click access to the Integrated
Lights-Out or Remote Insight Lights Out Edition board allows systems administrators
to take full graphical control of ProLiant servers in remote locations or lights-out
data centers. Finally, Insight Manager 7 in concert with the Version Control Agents
and Version Control Repository Manager enables systems administrators to version
manage and update system software across groups of ProLiant servers.
SmartStart
SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 5.00.
Management
Agents
The Management Agents
form the foundation for HP's Intelligent Manageability strategy. They provide
direct, browser-based access to in-depth instrumentation built into HP servers,
workstations, desktops, and portables, and send alerts to Insight Manager 7 and
other enterprise management applications in case of subsystem or environmental
failures. For additional information about the Management Agents and other management
products from HP, please visit the management Web site at http://www.hp.com/servers/manage.
ActiveUpdate
Active
Update is a web-based application that keeps IT managers directly connected to
HP for proactive notification and delivery of the latest software updates.
ROMPaq, support software, and
configuration utilities
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options.
Survey
Utility and diagnostics utilities
The
most advanced configuration analysis, reporting and troubleshooting utilities
used by HP and at your fingertips.
Optional
ProLiant Essentials Value Packs
Optional
software offerings that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
Rapid Deployment Pack
– an automated solution for multi-server deployment and provisioning, enabling
companies to quickly and easily adapt to changing business demands.
Workload
Management Pack – provides easier management of complex environments, improving
overall server utilization and enabling Windows® 2000 customers for the first
time to confidently deploy multiple applications on a single multiprocessor ProLiant
Server.
Performance Management Pack – a performance management solution
that identifies and explains hardware performance bottlenecks on ProLiant servers
and attached options enabling users to better utilize their valuable resources.
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: http://www.hp.com/servers/proliantessentials.
Industry Standard
Compliance
ACPI 1.0b Compliant
PCI-X and PCI 2.2 Compliant
PAE Support
Microsoft® Logo certifications
Manageability
Insight Manager 7
Remote Insight Lights-Out Edition (optional)
ROM-Based Setup Utility (RBSU)
Integrated Management Display (IMD)
Server Health logging
Automatic Server Recovery-2 (ASR-2)
System Interconnect Status Indicators
Remote-Flash Redundant ROM
Hot Spare Boot (NOTE: Upon the event of a
failed processor or VRM in a multi-processing environment, the system
will automatically reboot and use the remaining good processor(s).)
Power Down Utility
Power Supply Viewer
Pre-Failure Warranty (covers processors, as well as hard drives and memory)
Availability
PCI-X/PCI Hot Plug with push button functionality
Redundant Hot Plug Fans
Smart Array 5300 Controller (optional)
Dynamic sector repairing and drive parameter tracking (with Smart Array
controllers)
Redundant Processor Power Modules
Redundant/adaptive load balancing NIC Support
Hot Plug Dual Port 10/100 TX NIC
Redundant Hot Plug Power Supplies
ECC Memory
Security
Power-on password
Hot plug keyboard password
Diskette drive control
Diskette boot control
Network server mode
Security provision
Parallel and serial interface control
Administrator's password
Disk configuration lock
Hot plug access security
Server
Power Cords
Two Lowline power
cords & two Highline power cords ships standard
Power Supply
Two Redundant Hot Plug 1150/500-Watt power supplies
per system. Power supplies are load sharing and provide 1150 Watts of Redundant power for 220 volt
input or 500 Watts of Redundant power for 110 volt input.
NOTE: To ensure
redundancy of server power, HP recommends that 200-240 VAC power be used
for all deployments. This will ensure that both power supplies can support
up to their maximum configurations, and remain in a redundant power supply
state.
NOTE: A maximum of two power supplies are supported.
System Fans
Two Hot-Plug redundant fans
ship standard. Two maximum supported.
Microsoft Windows NT®
4.0 Server Microsoft Windows 2000 Novell NetWare SCO UnixWare®
LINUX (Red Hat, SuSE, TurboLinux Server, Caldera eServer) Sun Solaris Intel
Platform Edition Microsoft Windows 2000 Datacenter Edition
NOTE:
The Microsoft Windows 2000 Datacenter Edition is available only as part of
a Data Center solution. NOTE: For a more complete and up-to-date listing
of supported OS's and versions, please visit our OS Support Matrix at: ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf.
Data Center services and support
offerings are available with Data Center solutions.
Rack
Airflow Requirements
Rack
9000 and 10000 series Cabinets The increasing power of new high-performance
processor technology requires increased cooling efficiency for rack-mounted servers.
The 9000 and 10000 Series Racks provide enhanced airflow for maximum cooling,
allowing these racks to be fully loaded with servers using the latest processors.
Rack 7000 series Cabinets When installing a server with
processors running at speeds of 550 MHz or greater in Compaq Rack 7000 series
racks with glass doors (165753-001 (42U), and 163747-001 (22U)), the new processor
technology requires the installation of High Airflow Rack Door Inserts ( 327281-B21
(42U), 327281-B22 (42U 6 pack), or 157847-B21 (22U)) to promote enhanced airflow
for maximum cooling.
CAUTION: If
a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front
and rear doors: If your 42U server rack includes closing front and rear doors,
you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from
top to bottom to permit adequate airflow (equivalent to the required 64 percent
open area for ventilation).
Side: The
clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION:
Always use blanking panels to fill all remaining empty front panel U-spaces
in the rack. This arrangement ensures proper airflow. Using a rack without blanking
panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide
or the Documentation CD provided with the server, or to the server documentation
located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html.
Service
and Support
HP Services provides
a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard
drives, memory and processors) fully supported by a worldwide network of resellers
and service providers. HP technical assistance is available 7x24, toll free in
the United States and Canada. Telephone support services may be covered under
warranty or available for an additional fee. NOTE:
Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
A full range of HP Care Pack packaged hardware and software services:
Installation and start up
Extended coverage hours and enhanced response
times
NOTE:
These options are only supported in the ProLiant 8500 server.
ProLiant 8500 Pentium III
Xeon 550 MHz to 900 MHz Processor Upgrade Kit
232291-B21
NOTE: This
upgrade kit (PN 232291-B21) enables customers to upgrade from 550 MHz Pentium III
Xeon processor technology to 900 MHz Pentium III Xeon processor technology.
NOTE: The
upgrade kit includes the following:
– Includes 4 x Pentium III Xeon 900MHz/2MB processors
– New processor/memory drawer
– Rom BootBlock chip, and chip removal tool
– Service event (Installation)
– Detailed instructions guide
NOTE: This
Upgrade Kit (PN 232291-B21) is only supported by the ProLiant 8500 server.
ProLiant 8500 Pentium III
Xeon 550 MHz to 700 MHz Processor Upgrade Kit
200799-B21
NOTE: This
upgrade kit (PN 200799-B21) enables customers to upgrade from 550 MHz Pentium III
Xeon processor technology to 700 MHz Pentium III Xeon processor technology.
NOTE: This
Upgrade Kit (PN 200799-B21) is only supported by the ProLiant 8500 server.
ProLiant
Essentials
Value Pack Software
Rapid Deployment
Pack, 1 User, V1.x NOTE: This license allows 1 server
to be managed and deployed via the Deployment Server.
267196-B21
Rapid Deployment
Pack, 10 Users, V1.x NOTE: This license allows 10 servers
to be managed and deployed via the Deployment Server.
ProLiant Essentials
Performance Management Pack v2.0, Single License
306696-B21
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
HP NetServer to ProLiant
integration and assessment service
304164-002
NOTE:
HP identifies current levels of NetServer support, services, and management.
This service helps maximize customer’s ability to add ProLiant platforms
into their current environment.
HP TopTools to Insight
Manager 7 installation and startup service
304163-002
NOTE: Provides on-site
review, installation and configuration services for Insight Manager 7. HP
will also re-create, as closely as possible, the views and reports from
the customer’s current TopTools configuration. This service assures a smooth
transition to the ProLiant Essentials software.
HP NetServer to ProLiant
Essentials Rapid Deployment Pack installation and startup service
304162-002
NOTE: Install and configure
Rapid Deployment Pack in a test environment, then deploy a server image
to a maximum of 250 systems in the production environment. This service
helps to assure successful system deployment.
Processor
NOTE: Pentium III
Xeon 550MHz, 700 MHz, or 900 MHz processors cannot be mixed in the same server.
They all have to be of the same speed.
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3
speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI
HBA to support U320 transfer rates.
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications
such as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature: U320 Hard Drive QS: http://h18000.www1.hp.com/products/quickspecs/11531_na/11531_na.html
NOTE:
Please see the 20/40-GB DAT Tape Drive QuickSpecs for additional options such
as host bus adapters, controllers, cassettes, and for an up-to-date listing of
the latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/10426_na/10426_na.html
External
AIT Tape Drives
HP StorageWorks External AIT
35-GB, LVD Tape Drive (Carbon)
NOTE:
Please see the AIT 35 GB, LVD Tape Drive QuickSpecs for additional options
such as adapters, controllers, and cassettes, and for an up-to-date listing of
the latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/10712_na/10712_na.html
HP
StorageWorks AIT 50-GB Tape Drive, External (Carbon)
157767-002
HP
StorageWorks Internal AIT 50-GB, Hot Plug (Carbon)
NOTE: Please see the AIT 50-GB Tape Drive QuickSpecs for additional
options such as adapters, controllers, and cassettes, and for an up-to-date listing
of the latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/10425_na/10425_na.html
HP StorageWorks External AIT
100-GB Tape Drive (Carbon)
NOTE: Please
see the AIT 100-GB Tape Drive QuickSpecs for additional options such as adapters,
controllers, and cassettes, and for an up-to-date listing of the latest O/S Support
details, please see the following: http://h18006.www1.hp.com/products/quickspecs/11062_na/11062_na.html
External
DLT/SDLT Tape Drives
HP
StorageWorks 40/80-GB DLT Tape Drive, External (Carbon)
NOTE:
Please see the 40/80-GB DLT Drive QuickSpecs for additional options such as
host bus adapters, controllers, cassettes, and for an up-to-date listing of the
latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/10658_na/10658_na.html
External
DLT VS Tape Drives
HP StorageWorks DLT VS 40/80
Tape Drive, External (Carbon)
NOTE:
Please see the DLT VS 40/80 Tape Drive QuickSpecs for additional options such
as host bus adapters, controllers, cassettes, and for an up-to-date listing of
the latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/10403_na/10403_na.html
HP StorageWorks Rackmount SDLT
110/220, 3U (Single Drive)
NOTE:
Please see the SDLT 160/320-GB Tape Drive QuickSpecs for additional options
such as adapters, controllers, and media, and for an up-to-date listing of the
latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/10406_na/10406_na.html
NOTE:
Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional
options such as controllers, and other related items, and for an up-to-date listing
of the latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/11415_na/11415_na.html
HP StorageWorks Ultrium 460 Tape
Drive for ProLiant, External (Carbon)
NOTE:
Please see the HP StorageWorks Ultrium 460 Tape Drives for ProLiant QuickSpecs
for additional options such as data and cleaning cartridges, and for an up-to-date
listing of the latest O/S Support details, please see the following: http://h18006.www1.hp.com/products/quickspecs/11530_na/11530_na.html
External
DAT Autoloader
20/40-GB DAT 8 Cassette Autoloader
External (Opal)
166505-001
NOTE: Please
see the 20/40-GB DAT DDS-4 8 Cassette Autoloader QuickSpecs for additional options
such as adapters, controllers, and cassettes, and for an up-to-date listing of
the latest O/S Support details, please see the following:
http://h18006.www1.hp.com/products/quickspecs/10518_na/10518_na.html
AIT
Autoloader
HP StorageWorks AIT 35 GB Autoloader,
Rackmount (Carbon)
280349-001
NOTE: Please
see the AIT 35-GB Autoloader QuickSpecs for additional options such as adapters,
controllers, and cassettes, and for an up-to-date listing of the latest O/S Support
details, please see the following: http://h18006.www1.hp.com/products/quickspecs/11404_na/11404_na.html
HP
StorageWorks 1/8 Autoloader
HP
StorageWorks 1/8 Autoloader, Tabletop, Ultrium 230
NOTE: The 3U
Rackmount Kit (PN 274338-B21) can support up to (2) full-height or (4) half-height
tape drives and compatible with multiple internal Single-Ended and LVD SCSI Tape
Drives including the 12/24-GB DAT, 20/40-GB DAT, 20/40-GB DAT DDS-4 8 Cassette
Autoloader, AIT 35-GB LVD, AIT 50 GB, AIT 100 GB, 20/40-GB DLT, 40/80-GB DLT,
SDLT 110/220-GB, SDLT 160/320-GB, Ultrium 230, and Ultrium 460 Tape Drives.
5U
Rackmount Kit
274339-B21
NOTE: The 5U
Rackmount Kit (PN 274339-B21) can support up to (4) full-height tape drives and
is compatible with all HP internal DLT/SDLT/Ultrium tape drives including the
20/40-GB DLT, 35/70-GB DLT, 40/80-GB DLT, SDLT 110/220-GB, SDLT 160/320, Ultrium
230, and Ultrium 460 tape drives.
SAN Access Module for Smart Array 5302 Controller (Japan)
216687-291
NOTE:
Please see the SSL2020 Automated AIT Tape Library Solution QuickSpecs for
additional information including Upgrade Kits, Accessories, and SCSI Cable Kits
and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/10580_na/10580_na.html
NOTE: Please
see the StorageWorks MSL5026DLX or MSL5026SL Library QuickSpecs for additional
information including Upgrade Kits, Accessories, and SCSI Cable Kits and additional
options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/10860_na/10860_na.html
MSL5026SL,
Rackmount, 1 SDLT Drive (Graphite)
302512-B21
MSL5026SL,
Rackmount, 2 SDLT Drive (Graphite)
302512-B22
NOTE:
Please see the StorageWorks MSL5026SL Library QuickSpecs for additional information
including Upgrade Kits, Accessories, and SCSI Cable Kits and additional options
needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11440_na/11440_na.html
NOTE: Please
see the StorageWorks MSL5026S2 Library QuickSpecs for additional information including
Upgrade Kits, Accessories, and SCSI Cable Kits and additional options needed for
a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11453_na/11453_na.html
NOTE:
Please see the StorageWorks MSL5052SL Library QuickSpecs for additional information
including Upgrade Kits, Accessories, and SCSI Cable Kits and additional options
needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11061_na/11061_na.html
NOTE: Please
see the StorageWorks MSL5052S2 Library QuickSpecs for additional information including
Upgrade Kits, Accessories, and SCSI Cable Kits and additional options needed for
a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11442_na/11442_na.html
NOTE: Please
see the StorageWorks MSL5030 LTO Library QuickSpecs for additional information
including Upgrade Kits, Accessories, and SCSI Cable Kits and additional options
needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11439_na/11439_na.html
NOTE: Please
see the StorageWorks MSL5060 LTO Library QuickSpecs for additional information
including Upgrade Kits, Accessories, and SCSI Cable Kits and additional options
needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11438_na/11438_na.html
NOTE: Please
see the StorageWorks ESL9322S2 Enterprise Library QuickSpecs for additional information
including Tape Drives, Cartridges, Controllers, and SCSI Cables and additional
options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11437_na/11437_na.html
ESL9322L1
SDLT Library
ESL9322L1, 222 slot, 2 Drives,
LTO1
301927-B22
ESL9322L1, 222 slot, 8 Drives,
LTO1
301927-B28
ESL9322L1, 322 slot, 2 Drives,
LTO1
301928-B22
ESL9322L1, 322 slot, 8 Drives,
LTO1
301928-B28
NOTE: Please
see the StorageWorks ESL9322L1 Enterprise Library QuickSpecs for additional information
including Tape Drives, Cartridges, Controllers, and SCSI Cables and additional
options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11445_na/11445_na.html
ESL9595SL
SDLT Library
ESL9595SL Enterprise Library,
400 slot, 16 Drive
274672-B22
ESL9595SL Enterprise Library,
500 slot, 2 Drive
281627-B22
NOTE: Please
see the StorageWorks ESL9595SL Enterprise Library QuickSpecs for additional information
including Tape Drives, Cartridges, Controllers, and SCSI Cables and additional
options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11332_na/11332_na.html
ESL9595S2
SDLT Library
ESL9595S2, 400 slot, 2 Drives,
SDLT2
293411-B22
ESL9595S2, 400 slot, 16 Drives,
SDLT2
293411-B28
ESL9595S2, 500 slot, 2 Drives,
SDLT2
293412-B22
ESL9595S2, 500 slot, 16 Drives,
SDLT2
293412-B28
ESL9595S2, 595 slot, 2 Drives,
SDLT2
293413-B22
ESL9595S2, 595 slot, 16 Drives,
SDLT2
293413-B28
NOTE: Please
see the StorageWorks ESL9595S2 Enterprise Library QuickSpecs for additional information
including Tape Drives, Cartridges, Controllers, and SCSI Cables and additional
options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11436_na/11436_na.html
ESL9595L1
SDLT Library
ESL9595L1, 400 slot, 2 Drives,
LTO1
301929-B22
ESL9595L1, 400 slot, 16 Drives,
LTO1
301929-B28
ESL9595L1, 500 slot, 2 Drives,
LTO1
301931-B22
ESL9595L1, 500 slot, 16 Drives,
LTO1
301931-B28
ESL9595L1, 595 slot, 2 Drives,
LTO1
301932-B22
ESL9595L1, 595 slot, 16 Drives,
LTO1
301932-B28
NOTE: Please
see the StorageWorks ESL9595L1 Enterprise Library QuickSpecs for additional information
including Tape Drives, Cartridges, Controllers, and SCSI Cables and additional
options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11435_na/11435_na.html
ESL9000
series Libraries Options
ESL9000
Field Upgrade SDLT 110/220, LVD Drive (ESL9198SL,
ESL9326SL, ESL9595SL)
NOTE:
Options include controller, solution kits, ACS. MA8000/EMA12000 includes controller
shelf, drive shelves and cabinet. Packaging upgrade to RA8000/ESA12000.
NOTE:
Models include: Dual HSG80 controllers in each Model 2200 enclosure (2 pairs
per single bus configuration, 4 pairs per dual bus configuration) with 1GB cache
per controller pair, and 12 14-bay drive enclosures with redundant power supplies.
Configure-to-Order (CTO) builds are available. Options include ACS, platform kits
and software by HP.
NOTE:
This PDU has a detachable input power cord and allows for adaptability to
country specific power requirements. This model may also be used with the high
volt UPSs R3000 XR and R6000 For North America, need to order cable PN 340653-001.
NOTE: This kit
allows you to mount the Modular PDUs in racks other than the 9000/10000
Series racks (any racks using the standard 19" rail). For more details
please refer the Modular PDU QuickSpecs.
4.5' IEC C 13 to IEC C14 PDU Jumper
Cable (1 per pack)
142257-006
4.5' IEC C 13 to IEC C14 PDU Jumper Cable (15 per pack)
NOTE: -B21 (pallet) used to ship empty racks
shipped on a truck -B22 (shock pallet) used to ship racks with equipment installed
(by custom systems, VARs and Channels) -B23 (crated) used for air shipments
of empty racks
NOTE: It
is mandatory to use a shock pallet in order to ship racks with equipment installed.
Not all Compaq equipment is qualified to be shipped in the Rack 10000 series
NOTE:
–B21 (pallet) used to ship empty racks shipped on a truck –B22 (shock
pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels) –B23 (crated) used for air shipments of empty racks
NOTE:
This kit can be used to connect 9000 and 10000 series racks of the same U
height together. Kit contents include hardware for connecting racks and a panel
to cover the 100mm gap at the rear of the two racks.
NOTE:
The Rack Blanking Panels (PN 189453-B21) contains 10 each of (3U).
Rack Blanking Panels (4U)
189453-B24
NOTE:
The Rack Blanking Panels (PN 189453-B21) contains 10 each of (4U).
Rack Blanking Panels (5U)
189453-B25
NOTE:
The Rack Blanking Panels (PN 189453-B21) contains 10 each of (5U).
9000/10000 Series Offset Baying Kit (42U)
248931-B21
NOTE:
This kit can be used to connect 9000 and 10000 series racks of the same U
height together. Kit contents include hardware for connecting racks and a panel
to cover the 100mm gap at the rear of the two racks.
NOTE:
Input Device Adjustable Rails (287139-B21) are for use with the TFT5110R,
TFT5600RKM and integrated keyboard/drawer which is used in mounting into third
party racks.
NOTE:
Input Device Adjustable Rails ( 287138-B21) are for use ONLY with the TFT5110R,
TFT5600RKM and integrated keyboard/drawer which is used in mounting into third
party racks.
Service
and Support Offerings (HP
Care Pack Services)
NOTE:These Service and Support Offerings are for Windows NT, Windows 2000 Server/Advanced
Server or Novell NetWare Operating System.
Hardware Services 4-Hour
On-site Service
4-Hour On-site Service, 9-Hour
x 5-Day Coverage, 3 Years (6-3 Part Number for U.S.)
401785-002
4-Hour On-site Service, 9-Hour
x 5-Day Coverage, 3 Years (2-5-2Part Number for Canada)
401785-122
4-Hour On-site Service, 24-Hour
x 7-Day Coverage, 3 Years (6-3 Part Number for U.S.)
401784-002
4-Hour On-site Service, 24-Hour
x 7-Day Coverage, 3 Years (2-5-5 Part Number for Canada)
401784-122
Installation &
Start-up Services
Hardware Installation (6-3 Part Number for U.S.)
401794-002
Hardware Installation (6-3 Part
Number for Canada)
401794-122
Pre-installation planning; unpack
equipment, install most current Compaq HW options internal to server at same time
of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Win NT Operating System plus up
to 1 day start-up activity, configure print & network access services, and
orientation (6-3 Part Number for U.S.)
240016-002
Pre-installation planning; unpack
equipment, install most current Compaq HW options internal to server at same time
of server installation; assemble & test; basic user information provided;
Install & configure basic functionality of Novell NetWare Operating System
plus up to 1 day start-up activity, configure print & network access services,
and orientation (6-3 Part Number for U.S.)
240011-002
Business
Solutions Priority Service Plan – Priority Level
9 x 5 HW, 4-hr response, Next Available HW engineer; 9 x 5 Bronze Software Support
2-hr response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239937-002
9 x 5 HW, 4-hr response, Next
Available HW engineer; 9 x 5 Bronze Software Support 2-hr response for Novell
NetWare Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239977-002
5 x 9 4-hour H/W, 5 x 9 2-hour
O/S (NT & NetWare), Three Years (6-3 Part Number for Canada)
155326-122
Business
Solutions Priority Service Plan – Priority 24 Level
24 x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support,
2-hr response for Windows NT, Windows 2000, Professional, Server or Advanced Server
Operating System, Next Available Specialist (6-3 Part Number for U.S.)
239939-002
24 x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Bronze Software Support, 2-hr
response for Novell NetWare Operating System, Next Available Specialist (6-3 Part
Number for U.S.)
239979-002
Business Solutions Priority
Service Plan – Priority Plus Level
7 x 24 4-hour H/W, 7 x 24
1-hour O/S (NT & NetWare), SPS account review, Three Years (6-3 Part Number
for Canada)
155338-122
Business
Solutions Priority Service Plan – Priority Silver
24 x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Silver Software Support, 1-hr
response, Monday – Friday, 8AM – 5PM local time, 2-hr response after hours for
Windows NT, Windows 2000, Professional, Server or Advanced Server Operating System,
Technical Account Manager, Technical Newsletter, SW activity review, proactive
patch notification, 1 System Healthcheck per year (6-3 Part Number for U.S.)
239941-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Silver Subsequent System Support for Windows NT, Windows 2000,
Professional, Server or Advanced Server Operating System (6-3 Part Number for
U.S.)
239943-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Silver Software Support, 1-hr response, Monday – Friday, 8AM
– 5PM local time, 2-hr response after hours for Novell NetWare Operating System,
Technical Account Manager, Technical Newsletter, SW activity review (6-3 Part
Number for U.S.)
239981-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Silver Subsequent System Support for Novell NetWare Operating
System (6-3 Part Number for U.S.)
239983-002
Business
Solutions Priority Service Plan – Priority Gold
24 x 7 HW, 4-hr response, Named HW engineer; 24 x 7 Gold Software Support, 30
minute response (critical), 1-hr response (non-critical), for Windows NT, Windows
2000, Professional, Server or Advanced Server Operating System, Technical Account
Manager, Technical Newsletter, SW activity review, proactive revision management,
Upgrade impact planning, 2 System Healthcheck per year (6-3 Part Number for U.S.)
239945-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Gold Subsequent System Support for Windows NT, Windows 2000,
Professional, Server or Advanced Server Operating System (6-3 Part Number for
U.S.)
239947-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Gold Software Support, 30 minute response (critical), 1-hr
response (non-critical), for Novell NetWare Operating System, Technical Account
Manager, Technical Newsletter, SW activity review, Upgrade impact planning (6-3
Part Number for U.S.)
239985-002
24 x 7 HW, 4-hr response, Named
HW engineer; 24 x 7 Gold Subsequent System Support for Novell NetWare Operating
System (6-3 Part Number for U.S.)
239987-002
Business
Solutions Priority Service Plan – Priority Gold Executive
24 x 7 HW, 2-hr response, Named HW engineer; 24 x 7 Gold Software Support, 30
minute response (critical), 1-hr response (non-critical), for Windows NT, Windows
2000, Professional, Server or Advanced Server Operating System, Technical Account
Manager, Technical Newsletter, SW activity review, proactive revision management,
Upgrade impact planning, 2 System Healthcheck per year (6-3 Part Number for U.S.)
239949-002
24 x 7 HW, 2-hr response, Named
HW engineer; 24 x 7 Gold Subsequent System Support for Windows NT, Windows 2000,
Professional, Server or Advanced Server Operating System (6-3 Part Number for
U.S.)
239951-002
24 x 7 HW, 2-hr response, Named
HW engineer; 24 x 7 Gold Software Support, 30 minute response (critical), 1-hr
response (non-critical), for Novell NetWare Operating System, Technical Account
Manager, Technical Newsletter, SW activity review, Upgrade impact planning (6-3
Part Number for U.S.)
239989-002
24 x 7 HW, 2-hr response, Named
HW engineer; 24 x 7 Gold Subsequent System Support for Novell NetWare Operating
System (6-3 Part Number for U.S.)
239991-002
Business
Solutions Priority Service Plan – Priority Premier Level
7 x 24 2-hour H/W, 7 x 24 1-hour
O/S (NT & NetWare), SPS Account Review, Proactive Management Review, named
S/w rep, Three Years (6-3 Part Number for Canada)
155338-122
Business
Solutions Priority Service Plan – Priority Executive Premier Level
7 x 24 2-hour H/W, 7 x 24 30-minutes
O/S (NT & NetWare), SPS Account Review, Proactive Management Review, named
S/w rep, Three Years (6-3 Part Number for Canada)
155342-122
Data Center Services and Support Offerings (HP
Care Pack Services)
NOTE: These Data Center Services and Support Offerings are for the Enterprise
Support Plan. Installation and Startup and Update Subscription are highly recommended
for the Data Center Solutions Program.
Data Center
Data Center Enterprise Support Plan for Single Server 7 x 24 2-hour H/W, 7
x 24 1-hour O/S (NT) One Year (6-3 Part Number for U.S.)
224371-002
Data Center Enterprise Support
Plan for 2 Node Cluster 7 x 24 2-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3
Part Number for U.S.)
224372-002
Data Center Enterprise Support
Plan for 4 Node Cluster 7 x 24 2-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3
Part Number for U.S.)
224373-002
Data Center Enterprise Support
Plan for Single Server 7 x 24 4-hour H/W, 7 x 24 1-hour O/S (NT) One Year
(6-3 Part Number for U.S.)
224376-002
Data Center Enterprise Support
Plan for 2 Node Cluster 7 x 24 4-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3
Part Number for U.S.)
224377-002
Data Center Enterprise Support
Plan for 4 Node Cluster 7 x 24 4-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3
Part Number for U.S.)
224378-002
Data Center Solution Installation
& Start-up Services (for servers)
Windows 2000 Datacenter Installation
and Startup Service Package for Single Server (6-3 Part Number for U.S.)
224737-002
Windows
2000 Datacenter Installation and Startup Service Package for 2 Node Cluster (6-3
Part Number for U.S.)
224738-002
Windows 2000 Datacenter Installation
and Startup Service Package for 4 Node Cluster (6-3 Part Number for U.S.)
224739-002
Data
Center Software Support Only Options for Systems Integrators
Data Center Gold Support Plan
for 50 Incidents (One-year) (6-3 Part Number for U.S.)
224381-002
Availability
Assessment
Availability Assessment Service for
Windows 2000 Datacenter (2-5-2 Part Number for U.S.)
QR-SMAAT-BA
Windows
2000 Data Center Subscription Service for OS Service Packs and Updates (One Year
Subscription)
NOTE: Required for
each server.
Windows
2000 Data Center 1-8 Processors Software Updates (One-year) (6-3 Part Number for
U.S.)
1024-MB
buffered SDRAM DIMM memory (two kits of 2 x 256-MB DIMMs)
Standard Memory Plus Optional Memory
Up to 13,312-MB of SDRAM DIMM memory is available with the
installation of optional SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 16,384-MB of SDRAM DIMM memory is available with the removal of
standard memory and the installation of optional SDRAM DIMM memory expansion kits.
NOTE: 16 slots with 2 per bank. Up to 16-GB memory
total. Memory must be added in banks of two DIMMs. Charts do not represent all possible
configurations.
Memory
Slot
1
2
3
4
5
6
7
8
Standard
1024 MB
256 MB
256 MB
256 MB
256 MB
empty
empty
empty
empty
Optional
13,312 MB
256 MB
256 MB
256 MB
256 MB
1024 MB
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
9
10
11
12
13
14
15
16
Standard
1024 MB
empty
empty
empty
empty
empty
empty
empty
empty
Optional
13,312 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from Compaq:
Compaq ProLiant DL760 900 MHz-2MB Model 4 2048 & 700 MHz-2MB Model 4-2048
Standard Memory
2048-MB buffered SDRAM DIMM memory (two kits of 2 x
512-MB DIMMs)
Standard Memory Plus Optional Memory
Up to 14,336-MB of SDRAM DIMM memory is available with
the installation of optional SDRAM DIMM memory expansion kits.
Standard Memory Replaced with Optional Memory
Up to 16,384-MB of SDRAM DIMM memory is available with
the removal of standard memory and the installation of optional SDRAM
DIMM memory expansion kits.
NOTE: 16 slots with 2 per bank. Up to 16-GB memory
total. Memory must be added in banks of two DIMMs. Charts do not represent all possible
configurations.
Memory
Slot
1
2
3
4
5
6
7
8
Standard
2048 MB
512 MB
512 MB
512 MB
512 MB
empty
empty
empty
empty
Optional
14,336 MB
512 MB
512 MB
512 MB
512 MB
1024 MB
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
9
10
11
12
13
14
15
16
Standard
2048 MB
empty
empty
empty
empty
empty
empty
empty
empty
Optional
14,336 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Maximum
16,384 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
1024 MB
Following are memory options available from Compaq:
NOTE:
All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
U320 drives require an optional U320 Smart Array Controller or U320 SCSI
HBA to support U320 transfer rates.
External Storage
Quantity Supported
Position Supported
Controller
StorageWorks Enclosure 4300
Family (supports Ultra2/Ultra3 drives)
BTU Rating (Maximum output) (NOTE
that the maximum heat output by the server is equal to the electrical power input.)
1555 Watts [5309 BTU/hr] (System is configured
to draw maximum power)
SCSI Connector
One
VHDCI connector for tape support only
Power Supply Output
Power (per power supply)
Rated Steady-State Power
500W/1150W
(lowlinehighline)
Maximum Peak Power
540W/1150W
(lowlinehighline)
Temperature Range
Operating
50° to 95° F at sea level, altitude de-rating of 1.8° F per 1,000
ft to 10,000 ft (10° to 35° C at sea level, altitude de-rating of 1°
C per 300 m to 3,000 m). Maximum rate of change is 18° F/Hr (10° C/Hr)
Non-operating
22° to 140 ° F ( -30° to 60° C). Maximum rate of change is 36°
F/Hr (20° C/Hr)
Relative Humidity (non-condensing)
Operating
10 to 90% relative
humidity, 82.4° F (28° C) maximum wet bulb temperature, non-condensing
Non-operating
5 to 95% relative humidity, 101.7° F (38.7° C) maximum wet bulb temperature,
non-condensing
Maximum
Wet Bulb Temperature
101.7°
F (38.7° C)
Acoustic Noise
Idle
(Fixed Disk Drives Spinning)
L WAd (BELS)
7.0
L pAm (dBA)
54
Operating (Random Seeks to Fixed Disks)
L WAd (BELS)
7.0
L pAm (dBA)
54
Power Supply
1150/500W,
Hot Plug Redundant (2 standard)
One Redundant Power Supply (optimized to provide full redundancy at 220
volts)
Input
Specifications
Normal
Line Voltage
100 to 120
VAC/200 to 240 VAC
Range Input Line
90 to 132 VAC/180 to 265 VAC
Frequency Range
47 to 63 Hz
Power Factor
0.95
Input Current
8 A at
100 VAC/10 A at 200 VAC
Inrush Current
< 70 A at 132 VAC (cold start)
Holdup Time
20 ms from zero crossing at 120 VAC
General Specifications
Full Output Rating
To
104° F (40° C) and 5,000 ft (1524 m)
To 89.6° F (32° C) and 10,000 ft (3,048 m) (derate linearly)
Minimum Load
1 A on
5 V output; 1 A on 12 V output; 0.5 A on 3.3 V output
Ambient Temperature
Range
Operating
50° to 104° F (10° to 40° C)
Storage
-40° to 149°
F (-40° to 65° C)
Dielectric Voltage Withstand
Input to Output
3,000
VAC/min
Input
to Ground
1,500 VAC/min
Input Transient
Susceptibility
Common
and Differential Mode (superimposed on AC line)
2,500 V, 1µs, damped sinusold 600 V, 10 µs pulse
Differential Mode
20%
step change in AC input voltage
1.44-MB Diskette Drive
Size
3.5 in
LED Indicators (front panel)
Green
Read/Write Capacity per Diskette (high/low density)
1.44 MB/720 KB
Drive Supported
One
Drive Height
11 mm
Drive Rotation
300 rpm
Transfer Rate Synchronous (Maximum)(high/low)
500 K/250 K bits/s
Bytes/Sector
512
Sectors/Track (high/low)
18/9
Tracks/Side (high/low)
80/80
Access Times
Track-to-Track
(high/low)
3/6 ms
Average (high/low)
174/94 ms
Settling Time
15 ms
Latency Average
83/100 ms
Cylinders (high/low)
80/80
Read/Write Heads
Two
Low-Profile 24X Max IDE CD-ROM Drive
Disk
Applicable Disk
CD-DA, CD-ROM (Mode 1 and 2)
CD-XA, CD-I (Mode 2, Form 1
and 2)
CD-I Ready, CD Extra, Video CD, CD-Bridge
Photo CD (Single and Multi-session)
CD-WO
Capacity
550 MB (Mode 1, 12 cm)
640 MB (Mode 2, 12 cm)
Diameter
4.7 x 3.15 in/12 x 8 cm
Rotational Speed
4200 rpm maximum
Center Hole
0.6 in/15 mm diameter
Thickness
1.2 mm
Track Pitch
1.6 µm
Block Size
Mode 0
2,368, 2,352 bytes
Mode 1
2,352, 2,340, 2,336, 2,048
bytes
Mode 2
2,352, 2,340, 2,336, 2,048
bytes
Interface
IDE (ATAPI)
Access Times (typical)
Random
< 140 ms
Full-Stroke
< 300 ms
Data Transfer Rate
Sustained
150 KB/s (sustained 1X)
Burst
2100 to 4800 KB/s
Cache Buffer
128 KB
Start-up Time (typical)
< 10 seconds
Stop Time
< 5 seconds
Operating Conditions
Temperature
41° to 120° F (5° to
55° C)
Humidity
10% to 80%
Dimensions
( HxWxD, maximum)
0.5 x 5.16 x 5.12 in (1.27 x 13.1 x 13 cm)
Weight
< 0.75 lb (< 340 g)
Integrated Smart Array Controller
Data Compatible with all Smart Array Controllers
Yes
Instant Upgrades to other Smart Array Controllers
Yes
Consistent Software Manageability Tools
Yes
PCI Bus
32-bit, 33 MHz (integrated on peripheral board)
PCI Peak Data Transfer Rate
133 MB/s
SCSI Protocols Supported
Ultra2, Wide-Ultra
SCSI Peak Data Transfer Rate
80 MB/s
Channels
2
1/1
Drives Supported (Maximum)
Maximum = total number of drives
NOTE: Maximum
is the total number of internal drives on each specific ProLiant server.
Cache
8-MB read only
RAID Support
0, 1, 1+ 0, 5
Logical Drives (external/internal)
32
Online Configuration
Yes
Online Capacity Expansion
Yes
Logical Drive Capacity Extension
Yes
Online Stripe Size Migration
Yes
Online RAID Level Migration
Yes
Online Spare Support
Yes
Automatic Data Recovery
Yes
Drive Roaming
Yes
Redundant Controllers
No
NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100
Network Interface
10Base-T/100Base-TX
Compatibility
IEEE 802.3/802.3u compliant
Data Transfer
Method
64-bit/66-MHz bus-master
PCI, compatible with 64/33, 32/66, and 32/33
Network Transfer Rate
10Base-T (Half-Duplex), 10Base-2
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
Connector
RJ-45
I/O Address and Interrupt
Automatic
Configuration
Cable
Support
10Base-T
Categories 3, 4 or 5 UTP (2 or 4 pair); up to 328 ft (100 m)
US Site
DL Quickspecs
Search:
327281-B21
© 2012 Canada PartsDirect