Upgrade
options now available for Quad-Core 8300 series AMD processors
At
A Glance
The
HP ProLiant DL585 G2 supports the AMD 8000 processors, enabling a huge boost in
performance over single-core processors. The G2 follows the award winning legacy
of the HP ProLiant DL585 by offering exceptional price/performance and price per
watt metrics. The 128 GB memory footprint enables most applications to run faster
or support more users than other systems and with the inclusion of Rev F processors
the ProLiant DL585 G2 has now been optimized for virtualization. The ProLiant
DL585 G2 combines AMD Opteron™ processor technology, best-in-class management
and outstanding uptime features in an enterprise-class system ideal for large
data center deployments.
Processors:
Dual-Core AMD 8200 Series Processors
Memory:
Up to 128 GB of memory, supported by (32) slots of PC2-5300 Registered
DIMMs at 667MHz
HP Smart Array P400/512MB BBWC Controller standard on some models
Internal
Drive Support:
Up to 1.168TB (8 x 146GB SFF SAS
hot plug drives)
Slimline floppy (optional) and slimline DVD/CD-RW (standard)
drives
Network Controller:
Two
embedded NC371i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine,
including support for Accelerated iSCSI through an optional Licensing Kit
One slot populated with the Smart
Array P400 Controller
Video Ports:
One front and one rear video ports
Integrated
Hypervisors (Optional):
VMware 3i virtualization
technology
Citrix XenServer virtualization technology
USB
Ports:
(5) Total USB 2.0 Ports: (2) front; (2)
rear; (1) internal
Redundancy:
Redundant
hot plug power supplies and fans
Management:
Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over
IP performance over shared network access
Innovative diagnostic lighting
(System Insight Display) for rapid response to service events
Form
Factor:
Delivering maximum performance in a versatile,
rack optimized form factor
Deployment/Serviceability:
Tool-less and virtually cable-less internal design
Rapid Deployment
racking solution (rack rails and cable management)
Customer Self Repair
(CSR): HP products are designed with many CSR parts to minimize repair time and
allow for greater flexibility in performing defective parts replacement
Warranty:
This product is covered by a global limited warranty
and supported by HP Services and a worldwide network of HP Authorized Channel
Partners resellers. Hardware diagnostic support and repair is available for three
years from date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services are available
through HP Care Pack services or customized service agreements. SATA hard drives
have a one-year warranty. NOTE: Server
Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next
business day response. Warranty repairs may be accomplished through the use of
Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge will result
when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts
are also designed for easy replacement but may involve added complexity. Customers
may choose to have HP replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP ProLiant DL585
G2 servers can support up to 4 processors.
Upgradeable to quad-core processors (when available)
Chipset
nVidia NForce Professional
2200 and 2050 chipsets, and AMD-8132 chipset
Memory Protection & Functionality
Advanced ECC
Memory
Type
PC2-5300 Registered DIMMs at 667 MHz
Standard One of the following depending on Model
2 GB (4 x 512 MB)
4 GB (4 x 1 GB)
8 GB (8 x 1 GB)
Maximum
128 GB (32 x 4 GB)
Network Controller
Two embedded NC371i
Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including
support for Accelerated iSCSI through an optional Licensing Kit
Expansion Slots
Expansion
Slot #
Technology
Width
Connector
Width*
Bus
Number**
Form
Factor
Notes
1
PCI-X
64-bit
N/A
42h
FH/HL
100MHz
2
PCI-X
64-bit
N/A
42h
FH/FL
100MHz
3
PCI Express
x4
x8
49h
FH/FL
4
PCI Express
x4
x8
4Ch
FH/FL
5
PCI Express
x8
x16
46h
FH/FL
6
PCI Express
x4
x8
4Fh
FH/FL
7
PCI
Express
x8
x16
02h
FH/FL
8
PCI
Express
x8
x16
05h
FH/FL
9
PCI
Express
x4
x8
08h
FH/HL
Reserved
for storage controller
*
Default bus assignment. Inserting cards with PCI bridges may alter the actual
bus assignment number. ** Slots are enumerated differently based on OS. MS
OS's enumerate from lowest to highest Device ID by bus (starting with the lowest
bus). FH = Full height; FL = Full length; HL = half-length; LP = Low profile.
Manageability
Integrated Lights-Out
2 (iLO 2) Standard Management (ASIC on the System Board)
Storage Controllers One of the following depending on Model
HP Smart Array P400/256MB
Controller (in a PCI-Express slot) NOTE: Standard on 2.0GHz and 2.2GHz
models.
HP Smart Array P400/512MB BBWC Controller (in a PCI-Express slot) NOTE: Standard on 2.4GHz, 2.6GHz,
2.8GHz, and 3.0GHz models.
Storage Data Protection
The Battery-Backed
Write Cache (BBWC) Enabler for the Smart Array P400 Controller protects
up to 512-MB write cache memory from hard boot, power, controller, or system
board failures.
Standard on all HP ProLiant DL585 G2 Models
Battery charge/life: Up to 72 hours/3 years
Transportable data protection
Increases overall controller performance
NOTE:
Safely transport your write cache data to another HP ProLiant DL585
G2 in the data center by removing the BBWC Enabler and Smart Array P400
Controller Memory Module simultaneously (connected by short cable).
Storage
Diskette Drive
Optional 1.44 MB Diskette Drive
(slimline) - ejectable for security and serviceability
Optical Drive
Slimline DVD/CD-RW Drive Standard
on all models - ejectable for security and serviceability
Hard Drives
None ship standard
Hard Disk Drive Backplane
Internal SAS backplane supports
up to eight SFF hard disk drives
Maximum
Internal Storage Type
Hot Plug SAS
1.168TB
8 x 146GB SFF SAS drives (internal
hot plug)
Hot Plug SATA
960GB
8 x 120GB SFF SATA (internal
hot plug)
Interfaces
Serial
1
Pointing Device (Mouse)
1
Video
1 front, 1 rear
Keyboard
1
USB 2.0 Ports
2 front, 2 rear, 1 internal
iLO 2 Remote Management
1
Network RJ-45
2
Graphics
Integrated ATI-RN50 with 32MB
DDR memory
Form Factor
Rack (4U = 7 inches), ships
with sliding rails and cable management system
Space saving form factor (4U) provides space efficiencies while providing
maximum deployment flexibility
HP
Insight Control Environment Management Suite
HP
Insight Control Environment delivers foundation management, including remote monitoring,
hardware resource deployment, health monitoring, software version control, performance
monitoring, vulnerability scanning and patch management, and power management.
HP Insight Control Environment installs and licenses the following components
by default using a wizard-based integrated installer:
HP Systems Insight
Manager
HP iLO Advanced Pack
HP Insight Power Manager
HP
Rapid Deployment Pack
HP Performance Management Pack
HP Vulnerability
and Patch Management Pack
HP Virtual Machine Management Pack
Additional
ProLiant Essentials software and management tools included on the Insight Control
Management kit can be installed manually
HP Server Migration Pack -
Universal Edition NOTE: HP Server Migration
Pack - Universal Edition is licensed separately from the Insight Control Environment
Suite.
HP Open Service Event Manager
HP Service Essentials
Remote Support Pack
NOTE:
Server Migration Pack - Universal Edition can be installed from the SMP Universal
CD included in the Insight Control Management media kit. NOTE: For additional
product and licensing information about HP Insight Control Environment, visit:
http://www.hp.com/go/ice.
HP
Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery,
imaging & deployment, monitoring, and management for Linux-based ProLiant
server platforms. Built on the industry-leading HP Systems Insight Manager framework,
this solution integrates open source technology with experience leveraged from
HP's Linux products in HP ICLE and HP XC Clusters, while providing paths to the
future with developing management technologies.
HP Insight Control management
suites and most HP ProLiant Essentials include a one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about this service,
please visit: http://www.hp.com/services/insight.
Server Management Stand Alone Software Product - ProLiant
Essentials
HP Systems Insight Manager
HP
Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based
environment to centrally manage servers, storage and other infrastructure devices,
(both HP and non-HP) across multiple operating system platforms.
HP ProLiant Essentials
Server Migration Pack - Universal Edition
Upgrading,
replacing, or virtualizing your existing server? Effortlessly transition to new
virtual or physical HP ProLiant servers or BladeSystem with automated, accurate
and affordable migration of OS, application and data. SMP Universal automates
the manual processes required for migrating servers between physical or virtual
platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal
allows all of the following migrations:
HP ProLiant Essentials Performance Management Pack
Performance
Management Pack (offered exclusively through the Insight Control suites) - a performance
management solution that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better utilize their
valuable resources
HP ProLiant Essentials Integrated Lights-Out (iLO 2) Advanced Pack
Upgrades
the iLO 2 processor with comprehensive remote control including Virtual KVM remote
graphical console, enhanced console sharing and replay, virtual media (floppy,
CD/DVD, USB key), virtual folders, and enterprise security (directory services
and two-factor authentication).
HP ProLiant Essentials Accelerated iSCSI Pack
Enables
the embedded Multifunction network controller to serve as both a NIC and an iSCSI
HBA providing access to SAN storage over the same connection used for networking.
Processing of the protocol stack is offloaded to the NIC reducing CPU utilization
and greatly improving the speed with which the requests are processed and sent
to the network.
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to: http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
Core Infrastructure Management
SmartStart
SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at: http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum):
SmartStart 7.60.
Insight
Management Agents
The
Insight Management Agents should be installed on all HP servers to present system
instrumentation, health and configuration information into HP Systems Insight
Manager and the HP System Management Homepage. The HP System Management Homepage
aggregates systems data from Insight Management Agents and other HP management
tools, providing a consolidated browser-based interface for managing individual
servers.
Insight Management Agents and The HP System Management Homepage
are included on ProLiant Support Packs, and can also be installed using the server
profiles provided with the ProLiant Essentials Rapid Deployment Pack.
For
additional information about the Management Agents and the HP System Management
Homepage please visit the management Web site at: http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's
Choice Driver and Support Alerts/Notifications is a web-based email subscription
service that provides software and driver change notifications for ProLiant products.
Sign up at: http://www.hp.com/go/subscriberschoice and
customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis.
ProLiant
Support Packs and ROMPaq, software
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options, available through ProLiant Support Packs the ProLiant Essentials
Rapid Deployment Pack, SmartStart or downloaded from software and drivers download
pages website at: http://www.hp.com/go/support.
HP
Serviceguard for Linux (SGLX)
HP Serviceguard for Linux is a high availability clustering solution designed
to protect applications and services from a wide variety of software and hardware
failures, monitoring the health of each server (node) and quickly responding to
failures such as those that affect system processes, system memory, LAN media
and adapters, and application processes.
The following is a quick summary
of HP Serviceguard for Linux features and support. For the most recent list of
Linux distributions & kernels, servers and storage supported with Serviceguard
for Linux, see the Serviceguard for Linux Datasheet, available at: http://www.hp.com/go/sglx/info.
Supported
Linux Distributions:
Red Hat EL 4
Red Hat EL 5
SUSE SLES10
Supported
Server Platforms
HP Integrity BladeSystem to Superdome
HP ProLiant
BladeSystem p-Class & c-Class
HP ProLiant DL
HP ProLiant ML
IBM System x
Dell PowerEdge
Sun x64
Fujitsu
Siemens PRIMERGY
Hypervisors
HP Integrity Virtual Machines
VMware
ESX
Application Integration Toolkits
HP Serivceguard
for Linux Oracle Database Toolkit
HP Serviceguard Extension for SAP on
Linux (SGeSAP/LX)
Free Application Integration Toolkits:
Apache
MySQL
NFS
PostgreSQL
Samba
Tomcat
Sendmail
Disaster
Tolerant Solutions
HP Serviceguard for Linux Extended Distance
Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring
for data replication and is storage array independent o HP StorageWorks XP/EVA
Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard
for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover
and failback between sites
Software updates are distributed
by HP Services to customers with support contracts
NOTE:
For additional information on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx
or see the HP Serviceguard for Linux QuickSpecs. NOTE: HP Serviceguard
for Linux products for HP ProLiant and select 3rd party x86 class servers include
one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid
access to HP support staff and proactive delivery of software updates. For more
information about this service, please visit: http://www.hp.com/services/swsupport.
Industry Standard
Compliance
ACPI 1.0a. Compliant
PCI 2.2 Compliant
PXE Support
WOL Support (with embedded NC371i
Multifunction Gigabit Network Adapters)
Physical Address Extension (PAE)
Support
Microsoft® Logo certifications
USB 2.0 Support
Remote
Management
Integrated Lights-Out
2 (iLO 2) Standard Management
Virtual Text Remote Console (pre OS-only)
Remote Serial Console
Virtual
Power Button Control
Virtual Unit ID control
Integrated Remote
Console (ActiveX Control client)
Dedicated & full function shared
network connectivity with VLAN
Embedded system health
Browser,
command line and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell
security (SSH)
Advanced Encryption Standard (AES) / Triple Data Encryption
Standard (3DES)
OS independent hardware health status
IML and
iLO Event Logging
Support for 12 user accounts with customizable access
privilege
Intelligent Manageability
HP Systems Insight Manager
SmartStart
Redundant ROM
Remote Flash ROM
Management Agents
Integrated Management Log (IML)
Automatic Server Recovery-2 (ASR-2)
ROM-Based Setup Utility (RBSU)
Dynamic Sector Repairing (with Smart Array Controllers)
Drive Parameter Tracking (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Redundant/adaptive load balancing NIC Support
Availability
Smart Array P400 Controller with standard Battery Backed Write Cache
(BBWC) Enabler provides transportable data protection and increases
overall controller performance. Up to 512MB Battery Backed Write Cache
protection available on all HP ProLiant DL585 G2 models.
Up to eight hot-plug SFF SAS Hard Drives
Dual Hot-Plug Redundant Power Supplies
Hot-Plug Redundant Fans (standard)
Fans are N+1 hot plug redundant
and individually removable.
Serviceability
System Insight Display - precisely depicts all major subsystems of
the server (PCI I/O, Memory, CPU, Redundant Cooling, Interlock, Thermtrip)
and gives instant visual indication of fault status. Located on top
front of server, beneath lid.
Tool-less, virtually cable-less interior design
Tool-less access to interior of server
Two ejectable, slimline Media Bay media drives (DVD/CD-RW standard
with support for optional floppy or optical drives) are removable
without the use of tools
Front accessible processors and memory
PCI Card Guides locks full length PCI cards in place during transit
Six individually removable fans connect without cables to the
system board
Tool-less removal of system board
Quick Deploy Rails
Tool-less design "snap in" rail
Security
Power-on password
Keyboard password
Diskette drive control enable/disable
Diskette boot control enable/disable
External USB port enable/disable
Network Server Mode
Serial interface control
Administrator's password
Removable Diskette drive (optional)
Removable optical drive
Power
Supply
910W (low line), 1300W
(high line) with 12V main output. Size is 2.8"(H) X 4.9"(W) X 7.5"(L).
NOTE: One Hot Plug Power Supply ships
standard with 2.0GHz and 2.2GHz models (optional Redundant Hot Plug Power Supply
Option Kit). NOTE: Two Hot Plug Power Supplies ship standard with 2.4GHz,
2.6GHz, 2.8GHz, and 3.0GHz models.
JIS
C8303 to IEC320-C19 IEC320-C14 to IEC320-C19 Jumper Cord
PRC
IEC320-C14
to IEC320-C19 Jumper Cord
USA
IEC320-C14 to IEC320-C19 Jumper
Cord
NOTE:
The HP ProLiant DL585 G2 servers ship standard worldwide with a 6-foot IEC 320-C14
to IEC320-C19 jumper cord. Japanese models also include a 3.6 meter lowline (100V)
power cord. If you require a local power cord, please check the Power Specifications
below for the appropriate country-specific power cord, or consult the Power Cord
Matrix: http://www.hp.com/go/powercordmatrix.
System Fans
Standard
6 Hot plug, redundant fans (individually
removable)
Maximum
6 Hot plug, redundant fans (individually
removable)
Microsoft Windows
Server 2003 Microsoft Windows Server 2008 Red Hat Enterprise Linux
SUSE Linux Enterprise Server Sun Solaris VMware Virtualization Software
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If
a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing
front and rear doors, you must allow 5,350 sq cm (830 square inches)
of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component
and the side panels of the rack must be a minimum of 7 cm (2.75 inches).
CAUTION: Always
use blanking panels to fill all remaining empty front panel U-spaces in
the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation
Guide or the Documentation CD provided with the server, or to the server
documentation located in the Support section at the following URL: www.hp.com/servers/dl585-g2.
Rack Mounting Requirements
HP ProLiant DL585 G2 rack models
provide tool-free support for racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000, HP/E series, H9 series and third
party racks) with an adjustment range from 24" 36" in depth.
The ambidextrous cable management arm can be mounted on either the left
or right side for improved cable management.
HP ProLiant DL585 G2 in Telco Racks Support for all 2-post Telco racks requires
the use of the standard rack kit and an additional option kit from Rack
Solutions (http://www.racksolutions.com/hp/)
Factory
Express Portfolio for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment
services for HP servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory
Express offers service packages for simple configuration, racking, installation,
complex configuration and design services as well as individual factory services,
such as image loading, asset tagging, and custom packaging. HP products supported
through Factory Express include a wide array of servers and storage: HP Integrity,
HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well
as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific
server model, please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP
Enterprise Configurator
The
HP eCo-Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet
the needs and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance.
Service and Support
HP Care Pack services provide total care and support expertise with committed
response designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server and purchased at the same time or afterward that
are internal to the enclosure. This also includes the 22" and smaller
external monitors and tower UPS options up to 3kVA. These items will be
covered at the same service level and for the same coverage period as
the server. Coverage of UPS Battery is not included, and standard warranty
terms & conditions apply. For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed
within the same rack.
To fully capitalizing on your HP ProLiant servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions, provides a range of support services designed
to meet the varying needs of your business. Whether an SMB, or large global
corporation, HP has a ProLiant server support offer to help you speedily
deploy and maximize system uptime.
Recommended Service - simplify ProLiant solution implementation,
maintenance, and management.
Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage only
Deployment Service: Installation and Start up only
Enhanced Service - optimize service level to increase IT performance
and availability.
Support: 3-Year Support Plus 24 only
Refer to the information on "Installation & Start-Up" for
service on ProLiant server and Microsoft or Linux O/S per the Customer
Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm,
M-F, excluding HP holidays.
Designed for enterprise customers
with growing data centers and application and Internet service providers
that require a rack optimized 4-processor server that delivers maximum performance
and high availability for highly complex, business critical applications.
Specifically, the HP ProLiant DL585 G2 would be excellent for running the
following types of applications:
Configuration Information - Factory Integrated Models
NOTE:
This section lists some of the steps required to configure a Factory
Integrated Model. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative
for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server
Configuration Level 1. NOTE: FIO indicates that this option only available as a Factory
Installable Option.
Step
1: Base Configuration
Models
HP ProLiant DL585
G2 Rack CTO Chassis
418633-B21
Factory Integrated
Models ship with:
Two embedded NC371i Multifunction Gigabit Network Adapters
Integrated Lights-Out 2 (iLO 2) Standard management
Six (6) Redundant Hot Plug Fans
One Hot Plug Power Supply
Rack 4U Form Factor
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processors
AMD Opteron™
8224SE 3.2 GHz-1 MB Dual-Core Processor (120W) 2P Option Kit NOTE: If four processors are desired, select one 458932-B21 and one
458932-B21.
AMD Opteron™
8222SE 3.0 GHz-1 MB Dual-Core Processor (120W) 2P Option Kit NOTE: If four processors are desired,
select one 448184-B21 and one 448184-B21.
448184-B21
AMD Opteron™
8220 2.8 GHz-1 MB Dual-Core Processor (95W) 2P Option Kit NOTE: If four processors are desired,
select one 439728-B21 and one 439728-B21.
439728-B21
AMD Opteron™
8218 2.6 GHz-1 MB Dual-Core Processor 2P Option Kit NOTE: If four processors are desired,
select one 413933-B21 and one 413933-B21.
413933-B21
AMD Opteron™
8216 2.4 GHz-1 MB Dual-Core Processor 2P Option Kit NOTE: If four processors are desired,
select one 413932-B21 and one 413932-B21.
413932-B21
AMD Opteron™
8214 2.2 GHz-1 MB Dual-Core Processor 2P Option Kit NOTE: If four processors are desired,
select one 416734-B21 and one 416734-B21.
NOTE:
Memory must be ordered in like-pairs, i.e. two of the same size.
NOTE:
If all four banks on a memory node are populated, the maximum memory clock speed
will be 533 MHz. If two or fewer banks on a memory node are populated, the maximum
memory clock speed will be 667 MHz.
NOTE:
Electronic licensing options are available for Insight Control suites software
products. Please see the appropriate Insight Control QuickSpecs for additional
information.
HP Insight Control
Environment
HP Insight Control Environment, No Media 1-Server License including 1 year
of 24x7 Technical Support and Updates NOTE:
This part number can be purchased as a single license or as multiple licenses
with a single activation key. Customer will receive a license entitlement certificate
via e-mail. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24
x 7 HP Software Technical Support and Update Service. Only available directly
from HP and select resellers in the Americas region.
452148-B22
HP
Insight Control Management Software Media Kit NOTE:
Insight Control Management DVD media without licenses. Contains Insight Manager
and Essentials software products and components licensed by Insight Control Management
suites. Uses an integrated installer to perform quick and accurate software installation
and updates.
HP
Insight Control Environment for Linux v2.0, Media pack (CD) - No licenses included NOTE: This optional Media pack CD contains the ISO image for HP Insight
Control Environment for Linux, HP System Insight Manager, and an integrated installer.
Servers must be acquired separately. This Media pack is optional because the latest
ISO image and latest updates may be downloaded at no cost from: http://www.hp.com/go/ice-linux
(click on Download button).
464422-B21
HP
Insight Control Environment for Linux v2.0, No Media, 1-Server license, including
One year of 24x7 Technical Support and Updates NOTE: This part
number can be used to purchase one (1) license with a single activation key. Customer
will receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service. One certificate is shipped for each license.
Server
Management Stand Alone Software Product - ProLiant Essentials
NOTE:
Electronic licensing options are available for select ProLiant Essentials software
products. Please see the appropriate ProLiant Essentials QuickSpecs for additional
information.
Deploy
HP Server Migration
Pack - Universal Edition
HP
Server Migration Pack - Universal Edition, No Media, Physical / Virtual to ProLiant
Single Migration License, including 1 year of 24x7 Technical Support and Updates NOTE:
This license allows 1 physical to ProLiant or virtual to ProLiant migration.
Customer will receive a printed license entitlement certificate and documentation
via physical shipment. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Includes one year
of 24 x 7 HP Software Technical Support and Update Service.
460750-B21
HP
Server Migration Pack - Universal Edition, No Media, Physical / Virtual to Virtual
Single Migration License, including 1 year of 24x7 Technical Support and Updates NOTE:
This license allows 1 physical to virtual or virtual to virtual migration.
Customer will receive a printed license entitlement certificate and documentation
via physical shipment. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Includes one year
of 24 x 7 HP Software Technical Support and Update Service.
460753-B21
HP
Server Migration Pack - Universal Edition, No Media, 1-Year Unlimited Migration
License, including 1 year of 24x7 Technical Support NOTE:
This license allows unlimited migrations (physical to ProLiant, physical
to virtual, virtual to virtual, and virtual to ProLiant) for one year. Customer
will receive a printed license entitlement certificate and documentation via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7
HP Software Technical Support Service
HP
ProLiant Essentials Accelerated iSCSI Pack, No Media, Single License NOTE:
For use with a single NIC port. Contains one license with a unique license
activation key and documentation.
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to: http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials QuickSpecs for more information.
Processors
AMD Opteron™
8356, Quad-Core Processor (2.3 GHz, 75W ACP) 2P Option Kit NOTE:
Upgrading to 8300 series processors requires that all processors in the system
be matched. The VRMs included in this kit are not used on the G2; however, existing
system VRMs are compatible and additional compatible VRM kits may be ordered.
See the 'VRM Kit' section of the QuickSpecs for details.
448193-B21
AMD Opteron™ 8354, Quad-Core
Processor (2.2 GHz, 75W ACP) 2P Option Kit NOTE:
Upgrading to 8300 series processors requires that all processors in the system
be matched. The VRMs included in this kit are not used on the G2; however, existing
system VRMs are compatible and additional compatible VRM kits may be ordered.
See the 'VRM Kit' section of the QuickSpecs for details.
HP DL385G2/DL585G2 VRM Kit NOTE: This kit is only required when purchasing
8300 series upgrade kits for systems where existing VRMs are not installed. Two
VRM kits are necessary for each 2P option kit.
NOTE:
SATA drives have a 1 year warranty. Please see the QuickSpecs for Technical Specifications
such as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
NOTE:
SATA drives have a 1 year warranty. Please see the SATA Hard Drive QuickSpecs
for Technical Specifications such as capacity, height, width, interface, transfer
rate, seek time, physical configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html
(Worldwide)
Storage Controllers
SCSI
Controllers for External Drive/Storage Support
HP
SA-P400 and SA-E500 24 In Battery Cable Kit NOTE:
This option kit contains a 24" battery cable and adhesive material for installing
a batter into the server if a Smart Array E500 is integrated outside of the factory.
For all solutions, please refer to the server QuickSpecs and User's Manual for
detailed installation instructions.
HP Smart Array P400/256 MB Controller NOTE: The Smart Array P400 Controller supports internal Serial Attached
SCSI and Serial ATA drives. It is supported in all HP ProLiant DL585 G2 Models.
HP Smart Array P400/512 MB BBWC
Controller NOTE: The Smart Array P400
Controller supports internal Serial Attached SCSI and Serial ATA drives. It is
supported in all HP ProLiant DL585 G2 Models.
512
MB DDR BBWC Upgrade NOTE: For Smart
Array P400 Controller only. NOTE: If you install the 512MB DDR BBWC
as an upgrade to a Smart Array P400/256MB Controller, you must also order part
417836-B21 (HP SA-P400 and SA-E500 24 In Battery Cable Kit).
Battery-backed
write cache upgrade NOTE: For Smart
Array P400 Controller only. NOTE: If you install the Battery-backed
write cache as an upgrade to a Smart Array P400/256MB Controller, you must also
order part 417836-B21 (HP SA-P400 and SA-E500 24 In Battery Cable Kit).
HP
SA-P400 and SA-E500 24 In Battery Cable Kit NOTE:
This option kit contains a 24" battery cable and adhesive material for installing
a batter into the server if a Smart Array P400 is integrated outside of the factory.
For all solutions, please refer to the server QuickSpecs and User's Manual for
detailed installation instructions.
HP
Smart Array P600/256 BBWC Controller NOTE:
The Smart Array P600 Controller supports internal and external Serial Attached
SCSI and Serial ATA drives. It is supported in all HP ProLiant DL585 G2 Models.
HP
NC364T PCI Express Quad Port Gigabit Server Adapter NOTE:
There is a maximum of five NC364T PCI Express Quad Port Gigabit Server Adapter
NICs allowed in this server.
910W (low line), 1300W
(high line) Hot Plug Redundant Power Supply US - includes Nema 5-15P to IEC320-C19
power cord
348114-001
910W
(low line), 1300W (high line) Hot Plug Redundant Power Supply - includes C14 to
C19 IEC power jumper cable
348114-B21
NOTE: If you
require a local power cord, please check the Power Specifications below for the
appropriate country-specific power cord, or consult the Power Cord Matrix: http://www.hp.com/go/powercordmatrix.
For
recommended tape drive offerings for this ProLiant server see the following:
USB
Tape Drives
HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 160 USB drive
AG703A
SAS
Tape Drives NOTE: For the DL585
G2, HP recommends purchasing the HP SC44Ge HBA ( 416096-B21) for a dedicated SAS
HBA for tape.
HP
StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount
kit (AE459A) for a complete rack-mount solution.
DW085A
HP
StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount
kit (AE459A) for a complete rack-mount solution.
EH847A
HP
StorageWorks 1U SAS Rack-mount kit with one LTO-4 Ultrium 1760
EH946A
HP
StorageWorks LTO-4 Ultrium 1840 SAS Internal Tape Drive NOTE:
HP recommends combining this tape drive with the 3U SAS Rack-Mount kit (AG576A)
for a complete rack-mount solution.
EH860A
NOTE:
Please refer to the "Tape Drives, Tape Autoloaders & Tape Libraries"
table in the Storage section of this document for a list of SAS controllers with
tape support.
SCSI
Tape Drives
NOTE:
For the DL585 G2, HP recommends purchasing the HP SC11Xe HBA ( 412911-B21)
for a dedicated SCSI HBA for tape.
HP
StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 (Carbonite)
DW028B
HP
StorageWorks 1U SCSI Rack-mount kit with one LTO-3 Ultrium 920
EH903A
HP
StorageWorks 3U SCSI Rack-Mount with 1 LTO-4 Ultrium 1840 Tape Drive
HP
StorageWorks 1U SCSI Rack-Mount kit NOTE:
The 1U Rack-Mount Kit can support up to (2) half-height tape drives and is compatible
with multiple Single-Ended and LVD SCSI tape drives including the DAT 40, DAT
72, DAT 160, DLT VS160, LTO-1 Ultrium 232, LTO-2 Ultrium 448, LTO-3 Ultrium 920
and LTO-4 Ultrium 1760 tape drives.
HP
StorageWorks 1U USB Rack-Mount Kit NOTE:
The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and
is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 tape drives.
HP
StorageWorks 1U SAS Rack-Mount Kit NOTE:
The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives and is
compatible with the DAT 160 SAS, LTO-2 Ultrium 448 SAS, LTO-3 Ultrium 920 SAS
and LTO-4 Ultrium 1760 SAS tape drives.
AE459A
HP
StorageWorks 3U Rack-mount kit NOTE:
The 3U Rack-mount Kit can support up to (2) full-height or (4) half-height tape
drives and compatible with multiple LVD SCSI tape drives including DAT 40, DAT
72, DLT VS160, SDLT 600, LTO-1 Ultrium 232, LTO-2 Ultrium 448, LTO-3 Ultrium 920,
LTO-3 Ultrium 960, LTO-4 Ultrium 1760 and LTO-4 Ultrium 1840 tape drives.
274338-B22
HP
StorageWorks 3U SAS Rack-mount Kit NOTE:
The 3U Rack-mount Kit can support up to (2) full-height or (4) half-height tape
drives and compatible with multiple SAS tape drives including DAT 160 SAS, LTO-2
Ultrium 448 SAS, LTO-3 Ultrium 920 SAS, LTO-4 Ultrium 1760 SAS and LTO-4 Ultrium
1840 SAS tape drives.
HP
StorageWorks D2D120 Backup System NOTE:
2TB of Disk Storage.
EH884A
HP
StorageWorks D2D120 Backup System with Data Protector Express Software Kit NOTE:
2TB of Disk Storage.
EH924A
HP StorageWorks D2D130 Backup
System NOTE: 3TB of Disk Storage.
EH950A
HP
StorageWorks D2D130 Backup System with Data Protector Express Software Kit NOTE: 3TB of Disk Storage.
EH951A
HP
StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive NOTE: 3TB of Disk Storage.
EH952A
HP
StorageWorks D2D2503i Backup System NOTE:
3TB of Disk Storage.
HP
StorageWorks D2D4004i Backup System NOTE:
4.5TB of Disk Storage.
NOTE: Please
see the HP D2D Backup Systems QuickSpecs for additional information: http://www.hp.com/go/d2d.
Tape Autoloaders
HP StorageWorks
DAT Autoloader
HP
StorageWorks DAT 72x10 tape autoloader
AE313B
HP
StorageWorks 1/8 G2 Tape Autoloader
HP
StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
AK377A
HP
StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SCSI Tape Autoloader
AJ816A
HP StorageWorks 1/8 G2 LTO-3
Ultrium 920 Tape Autoloader
AH165A
HP StorageWorks 1/8 G2 LTO-3
Ultrium 920 SAS Autoloader
AH558A
HP StorageWorks 1/8 G2 LTO-2
Ultrium 448 Tape Autoloader
AH164A
HP StorageWorks 1/8 G2 Tape Autoloader
Rack Kit NOTE: Required to install
the 1/8 G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount
instructions
AH166A
NOTE:
Please reference the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution.
Tape
Libraries
HP StorageWorks MSL2024
Tape Library
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1840 SCSI Drive Library
AJ033A
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1840 4GB FC Library
AJ034A
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1760 SAS Drive Library
AK378A
HP
StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SCSI Drive Library
AJ818A
HP StorageWorks MSL2024 1 LTO-3
Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-4
Ultrium 1840 SCSI Drive Library
AJ035A
HP StorageWorks MSL4048 1 LTO-4
Ultrium 1840 4GB FC Library
AJ036A
HP StorageWorks MSL4048 2 LTO-4
Ultrium 1760 SAS Drive Library
AK380A
HP
StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SCSI Drive Library
AJ817A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 960 SCSI Drive Library
AG322A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 960 4GB FC Library
AG324B
HP StorageWorks MSL4048 1 LTO-3
Ultrium 920 SAS Drive Library
AH560A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 920 SCSI Drive Library
AH171A
NOTE: Please
reference the MSL Tape Library QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference current
compatibility information at: http://www.hp.com/go/ebs.
High Availability Cluster Options
HP
Serviceguard for Linux
HP Serviceguard Linux for HP
ProLiant/x86 Servers Licensed per physical server Includes media and One
Year 24x7 Software Support & Updates
463831-B21
HP Serviceguard Linux Oracle
Database Toolkit for HP ProLiant/x86 Servers Licensed per cluster Includes
media and One Year 24x7 Software Support & Updates
463833-B21
HP Serviceguard Extension for
SAP on Linux for HP ProLiant/x86 Servers Licensed per physical server Includes
media and One Year 24x7 Software Support & Updates
463834-B21
HP Serviceguard Linux Extended
Distance Cluster (XDC) for HP ProLiant/x86 Servers Licensed per physical server Includes
media and One Year 24x7 Software Support & Updates
463835-B21
NOTE: For a detailed
list of supported configuration/certification options for HP Serviceguard for
Linux please refer to the HP Serviceguard for Linux Certification Matrix at: http://www.hp.com/go/sglx/info NOTE: HP Serviceguard for Linux products running on x86 platforms now include
one year of 24 x 7 Software Technical Support and Updates. Please see the Support
Information section of the HP Serviceguard for Linux QuickSpecs for details. NOTE: For additional information including a complete list of Product Numbers
for HP Serviceguard for Linux, please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11518_div/11518_div.html
(Worldwide)
HP StorageWorks Modular Smart
Array 500 Generation 2 NOTE: Please see the Modular Smart
Array 500 Generation 2 QuickSpecs for additional information including configuration
steps and additional options needed for a complete solution at: http://h18000.www1.hp.com/products/quickspecs/11956_div/11956_div.html
(Worldwide)
335880-B21
Uninterruptible Power Systems – Rack
HP,
R1.5kVA UPS, 1U, NA
AF419A
HP, R1.5kVA UPS, 1U, INTL
AF418A
HP,
R1.5kVA UPS, 1U, JPN/TW
AF421A
HP R3000 VA UPS, 2U, DTC, INTL
AF414A
HP R3000 VA UPS, 2U, L5-30, NA
AF422A
HP R3000 VA UPS, 2U, L6-20, NA
AF423A
HP R3000 VA UPS, 2U, L6-20, JPN
AF424A
HP R3000 VA UPS, 2U, L5-30, JPN
AF425A
HP R5500 VA UPS, INTL
AF416A
HP
R5500 VA UPS, NA/JPN
AF426A
HP Monitored Power Distribution Unit (PDU)
HP
Monitored Power Distribution Unit: Full Rack Version
HP
17.3 kVA S2324 Monitored PDU dual input, 3U, 24A (NA/JPN)
AF503A
HP
8.3 kVA S1324 Monitored PDU single input, 3U, 24A (NA/JPN)
AF504A
HP
16.6 kVA S2140 Monitored PDU dual input, 1U, 40A (NA/JPN)
AF505A
HP
8.6 S1140 Monitored PDU single input, 1U, 40A (NA/JPN)
AF506A
HP
22.1 kVA S2316 Monitored PDU dual input, 3U, 16A (INTL)
AF507A
HP
11 kVA S1316 Monitored PDU single input, 3U, 16A (INTL)
AF508A
HP
14.7 kVA S2132 Monitored PDU dual input, 1U, 32A (INTL)
AF509A
HP
7.3kVA S1132 Monitored PDU single input, 1U, 32A (INTL)
AF510A
HP
Monitored Power Distribution Unit: Half Rack Version
HP
17.3 kVA S348 Monitored PDU- single input, 3Ø, 48A (NA/JPN)
HP
22 kVA S332 Monitored PDU single input, 3-phase, 32A (INTL)
AF917A
HP
4.9kVA S124 Monitored PDU single input, 1U, 24A (NA/JPN)
AF914A
HP
7.3kVA S132 Monitored PDU single input, 1U, 32A (INTL)
AF915A
Modular Power Distribution Units 1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets
shipped with
the unit (optimized for 10000 and 9000 series racks).
HP Modular Power Distribution
Units (mPDU), Low Volt Model, 24A (100-127 VAC) (NA, Japan) NOTE: This mPDU ( 252663-D71) may
also be used to connect the low volt model of the UPS R3000 XR.
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240
VAC) (WW) NOTE: This PDU has a detachable
input power cord and allows for adaptability to country specific power
requirements. This model may also be used with the high volt UPS R3000
XR. For North America, need to order cable PN 340653-001.
NOTE:
Cat5e cables are required to connect Interface Adapters to Console Switches.
Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
NOTE:
Cat5e cables are required to connect Serial Adapters to Serial Console Servers.
Additional Serial Adapters and Cat5e cables can be found at the following URL:
http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
Service
and Support Offerings (HP Care Pack Services)
Hardware Services On-site Service
4-Hour
On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
U4607E
4-Hour
On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4608E
Hardware
Services 6-Hour Call to Repair On-site Service
6-Hour
Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4609E
Installation
& Start-up Services
Hardware
Installation, Electronic
U4617E
Installation
& Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer
Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays, Electronic
U4618E
Support
Plus
Onsite
HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic
U4619E
Support
Plus 24
Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr
response time incl. HP holidays, Electronic
U4620E
Onsite
HW support 24x7, 4hr response and SuSE Linux SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
U6316E
Onsite
HW support 24x7, 4hr response and Red Hat AS Linux SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models."
HP ProLiant DL585
G2 2P Models
Standard Memory 4 GB PC2-5300 Double Data Rate
2 (DDR2) SDRAM (Registered SDRAM) memory running at 667 MHz or 2 GB PC2-5300
Double Data Rate 2 (DDR2) SDRAM (Registered SDRAM) memory running at 667 MHz with
Advanced ECC
At least one pair of DIMMs must be installed
in slots 1A and 2A to operate the server. Observe the following DIMM installation
guidelines to add additional memory to the server:
DIMMs must be installed in pairs.
DIMM
installed on the same memory bank must have the same part number.
DIMMs
installed in different banks can be of different sizes.
DIMMs
must be installed in decreasing capacity with the largest DIMMs installed in the
banks furthest away from each processor.
DIMM banks are active
only when the corresponding processor socket is populated.
NOTE:
If all four banks on a memory node are populated, the maximum memory clock speed
will be 533 MHz. If two or fewer banks on a memory node are populated, the maximum
memory clock speed will be 667 MHz.
The
following memory options are available from HP:
NOTE:
SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS
Controller using split cable (supplied with tape drive) deactivates 1 of the hard
drive bays. Actual hard drive bay deactivated depends on where split cable plugs
into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive
connector (5-8) on the back of the hard drive cage would mean drive bay 8 is deactivated.
Position
Supported
Controller
Controller Part Number
HP
StorageWorks SCSI Tape Drives, External LTO-1 Ultrium 232 LTO-2 Ultrium
448 LTO-3 Ultrium 960 LTO-3 Ultrium 920 LTO-4 Ultrium 1760 LTO-4 Ultrium
1840 DAT 40 DAT 72 DAT 160 DLT VS160 SDLT 600 1U Rack-Mount
Kit 3U Rack-Mount Kit
HP StorageWorks USB Tape Drives, External DAT 40 USB DAT 72
USB DAT 160 USB 1U Rack-Mount Kit
External
USB 2.0 Port
N/A
HP
StorageWorks SAS Tape Drives, External DAT 160 SAS LTO-2 Ultrium 448
SAS LTO-3 Ultrium 920 SAS LTO-4 Ultrium 1760 SAS LTO-4 Ultrium 1840 SAS 1U
Rack-Mount Kit 3U Rack-Mount Kit
HP
StorageWorks SAS Tape Automation, External 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096
External
HP
SC44Ge Host Bus Adapter NOTE: Please
visit http://www.hp.com/go/connect
for details about minimum SAS controller firmware version and SAS cabling requirements.
NOTE: To review typical system power ratings use the Active
Answers Power Calculator which is available via the online tool located
at url: http://h30099.www3.hp.com/configurator/powercalcs.asp
To drill down to calculators:
Click on: "ProLiant Servers"
Click on the Server of interest. Example: DL585 G2
Click on: "Power Calculator" link. (You may need to scroll
down to see it)
There are certain Dual-core, lowline, max configurations that are
not supported. All highline configurations are supported. Consult the
Power Calculator to determine if your lowline configuration is supported.
Standard Rack Model Power Cords / Jumper
Cords
Description
Asia Pacific
IEC320-C14 to IEC320-C19 Jumper Cord
Europe
IEC320-C14 to IEC320-C19 Jumper Cord
Japan
JIS C8303 to IEC320-C19
IEC320-C14 to IEC320-C19 Jumper Cord
PRC
IEC320-C14 to IEC320-C19 Jumper Cord
USA
IEC320-C14 to IEC320-C19 Jumper Cord
Optional Country Power Cords and Jumper Cords
Description
Option Kit Part Number
Australia/New Zealand
AS/NZS 3112 to IEC320-C19
305340-011
Denmark/Switzerland
IEC320-C19, Industrial
305340-081
Europe
CEE 7 to IEC320-C19
305340-021
Italy
IEC320-C19, Italy
305340-061
South Africa/India
IEC320-C19, SA
305340-AR1
UK
BS1363 to IEC320-C19
305340-031
US
Nema 5-15P to IEC320-C19
235603-001
US
Nema 6-20P to IEC320-C19
235604-001
US
Nema L6-20P to IEC320-C19, 20A,
250V, US
340653-001
WW
IEC320-C19 to IEC320-C14 Jumper
(10A, IEC, 6 ft/2.0m)
313227-B21
WW
IEC320-C19 to IEC320-C14 Jumper
(10A, IEC, 8 ft/2.5m)
291034-B21
WW
IEC320-C19 to IEC320-C14 Jumper
(10A, IEC, 10 ft/3.0m)
310927-B21
WW
IEC320-C19 to IEC320-C14 Jumper
(10A, IEC, 12ft/3.7m)
313228-B21
WW
IEC320-C19 to IEC320-C20 Jumper
(16A, IEC, 8ft/2.5m)
Click on the system of interest. Example: DL585 G2
Follow the
instructions of the next screens
Power
Supply Output (per power supply)
Rated
Steady-State Power
910 W (at 100
VAC), 1300 W (at 200 VAC)
Maximum
Peak Power
960 W (at 100 VAC),
1420 W (at 200 VAC)
System Inlet Temperature
Operating
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault
or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative
Humidity (non-condensing)
Operating
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are
the declared A-Weighted sound power levels (LWAd) and declared average bystander
position A-Weighted sound pressure levels (LpAm) when the product is operating
in a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
L
WAd
7.7 B
L
pAm
58 dBA
Operating
L
WAd
7.7 B
L
pAm
58 dBA
24X Max (or higher) IDE CD-ROM Drive Slim Line
Disk
Applicable
Disk
CD-DA, CD-ROM (Mode 1 and
2)
CD-XA, CD-I (Mode
2, Form 1 and 2)
Photo
CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
Capacity
540 MB (Mode 1, 12 cm)
650 MB (Mode 2, 12
cm)
Diameter
4.7 x 3.15 in (12 x 8 cm)
Rotational Speed
4200 rpm maximum
Center Hole
0.6 in/15 mm diameter
Thickness
1.2 mm
Track Pitch
1.6 µm
Block
Size
Mode 1
2,048
Mode 2
2,340,
2,336, 1,024 bytes
CD-DA
2,352
bytes
CD-XA
2,328
bytes
Interface
IDE (ATAPI)
Access
Times (typical)
Random
100 ms
Full-Stroke
2000 ms
Audio Output Level
Line-Out
0.7
Vrms at 47 kOhms
Headphone
0.6
Vrms at 32 kOhms (maximum volume)
Data
Transfer Rate
Sustained
150 KB/s (sustained 1X)
Burst
2100 to 3600 KB/s
Cache Buffer
128 KB
Start-up Time (typical)
< 7seconds
Stop Time
< 4seconds
Laser Parameters
Type
Semiconductor
Laser GaA1As
Wave Length
780
± 25 nm
Divergence
Angle
53.5° ± 1.5°
Output Power
0.14
mW
Operating
Conditions
Temperature
41° to 113° F (5° to 45° C)
Humidity
10% to 80%
Dimensions
(HxWxD, maximum)
1.69 x 5.75 x 8.19 in (4.29 x 15
x 20.8 cm)
Weight
2.66
lb (1.2 kg)
Slimline CD-RW/DVD-ROM 24X Combo Drive
Shipping
Dimensions
13.88 x 11.38
x 9.25 in (35.26 x 28.91 x 23.50 cm)
Shipping Weight
5 lb (2.27
kg)
Disk
Applicable Disk
DVD-ROM
DVD-R (Read Only)
2.6 GB/side DVD-RAM (Read Only)
5.2 GB/side DVD-RAM (Read Only)
CD-ROM Mode-1 data disc
CD-ROM
Mode-2 data disc
CD
Audio disc
CD-Extra
CD-RW
CD-R
CD
Text
PhotoCD
CD-I (mode 2)
CD-I Ready
CD-Bridge
Capacity
DVD-ROM
DVD-SL
4.7
GB/side
DVD-DL
8.5
GB/side
Double Sided
9.40
GB/side
DVD-R
3.95
GB/side
DVD-RAM
2.6
GB/side and 5.2 GB/
CD-ROM
Mode-1
650
MB (550 MB)
Mode-2
742
MB (640 MB)
Block
Size
DVD
2,048
bytes
CD
2,352
(Mode-0)
2352, 2340,
2336, 2048 bytes (Mode-1)
2352,
2340, 2336, 2048 bytes (Mode-2)
Diameter
120
mm, 80 mm (with adapter at vertical mounting mode)
Loading
Mechanism
Tray type
Interface
EIDE (ATAPI)
Access
Times (typical)
Random
DVD-ROM < 120 ms, CD-ROM < 110 ms
Full-Stroke
DVD-ROM < 240 ms, CD-ROM < 160 ms
Audio Output Level (typical)
Line-out
CD
0.7 Vrms at 47 Kohms Load
Data
Transfer Rate (sustained)
DVD-ROM
Single
Layer
10.8 MB/sec. Max.
DVD-RAM
2.77
MB/sec. Max
CD-ROM
7.2 MB/sec. Max.
Cache Buffer
2 MB
Spin-up Time
(typical)
less than 10 seconds
MTBF
120,000 Power On Hours (POH)
Ambient Temperature
Operating
-22°
to 140° F (-30° to 60° C)
Relative
Humidity
Operating
10% to 80%
Storage/Transportation
5%
to 95%
Dimensions
(HxWxD, maximum)
0.5 x 5.04 x 5.1 in (12.7 x 128 x 129.4 mm)
Option
Kit Contents
DVD-ROM
drive with installation guide, warranty card, registration card
Integrated
Lights-Out 2 Standard (integrated on system board)
Architecture
32-bit
PCI-based health and remote management ASIC (Application Specific Integrated Circuit)
Processor
32-bit
RISC processor core running at 66 MHz
Upgradeability
Option
firmware upgradeable via flash ROM
Video
Support
Utilizes the host server's
embedded video chip. Supports VGA/SVGA, 640 x 480 (256 to 16.7M colors), 800 x
600 (256 to 16.7M colors), 1024 x 768 (256 to 65K colors), 1280 x 1024 (256 colors)
Interfaces
One
Ethernet network connection (10/100 Mb/s)
Memory
2-MB
Flash ROM
8-MB SDRAM
Operating System
Support
Windows 2000 Server
Windows 2000 Advanced Server
Red Hat 7.x
SuSE
7.0
Client Browser Support
Microsoft
Internet Explorer 5.5 or later.
iLO
2 Standard Features
Virtual Text
Remote Console
Virtual
KVM
Virtual Power Button
Control
Virtual UID Control
Power Regulator Control
Dedicated LAN Connectivity
Secure access using web browser
Secure access using Secure Shell
(SSH) client
Serial connectivity
Automatic IP Configuration via
DHCP/DNS/WINS
Industry
Standard 128-bit Secure Sockets Layer (SSL) Security
IML
and iLO2 Event Logging
Support
for up to 12 user accounts with customizable access privileges
iLO Advanced Features
(optional)
Virtual Graphical Remote
Console
Virtual Floppy/USB
Key drive
Virtual CD-ROM
drive
Directory Services
Integration
Processor
States Reporting
Terminal
Services Integration
Smart Array P400 Controller
Disk Drive and Enclosure Interface
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
SAS Connectors
2 internal (SFF8484) x4 wide port
connectors
Cache Memory Speed
DDR2-533MHz with 40 or 72-bit
wide bus provides up to 4.2 GB/s maximum bandwidth.
64-bit, supporting greater than
4GB server memory space
RAID Support
RAID 6 with ADG (Advanced Data
Guarding) requires Battery Backed Write Cache Upgrade
RAID 5 (Distributed Data Guarding)
RAID 1, 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Upgradeable Firmware
Upgradeable Firmware with recovery
ROM feature
Two embedded NC371i Multifunction Gigabit Server Adapters
Network
Interface
10/100/1000-T
Compatibility
IEEE
802.3 10Base-T
IEEE
802.3ab 1000Base-T
IEEE
802.3u 100Base-TX
Data
Transfer Method
PCI Express,
four lanes (x4)
Network
Transfer Rate
10Base-T (Half-Duplex)
10
Mb/s
10Base-T (Full-Duplex)
20
Mb/s
100Base-TX (Half-Duplex)
100
Mb/s
100Base-TX (Full-Duplex)
200
Mb/s
1000Base-TX (Half
and Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories 3, 4, or 5 UTP; up
to 328 ft (100 m)
10/100/1000
Base-TX
Category 5 UTP up to
328 ft (100 m)
Environment-friendly Products and Approach
End-of-life
Management and Recycling
Hewlett-Packard
offers end-of-life HP product return, trade-in, and recycling programs in many
geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.