As the leading 2P 2U AMD rack server, the HP ProLiant
DL385 G7 is designed with virtualization in mind, yet flexible and expandable
to support any business need in many environments from corporate datacenters
to sophisticated SMBs.
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
NOTE: Processor wattage references reflect
Average CPU Power (ACP). For more information on ACP visit: http://www.amd.com/powernow.
NOTE: Up to
2 processors supported. High Performance Model configurations include two
processors, 16GB system memory, 1G storage controller memory, FBWC, DVDRW,
ICE license, Redundant 750W Power Supplies, and 6 hot plug redundant fans.
Cache Memory
12MB (1 x 12MB) Level 3 cache
memory
Chipset
AMD SR5690 Northbridge and SP5100
Southbridge
Upgradeability
Upgradeable to two processors
Memory Protection
Advanced ECC
Online Spare
Memory One of the following depending on Model
Type
DDR3 Registered (RDIMM) and Unbuffered (UDIMM) NOTE: If only one processor is
installed, only half of the DIMM slots are available.
Standard
(Performance Models)
16GB (8 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs
Standard
(Base Models)
8GB (4 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs
Standard
(Entry Models)
4GB (2 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs
Standard
(High Efficiency Models)
4GB (2 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs
Maximum (RDIMM)
256GB
Maximum (UDIMM)
64GB
NOTE:
If only one processor is installed, only half the DIMM slots are available NOTE: Depending on the memory configuration and processor model,
the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the
Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
Network Controller
Two HP NC382i Dual Port Multifunction
Gigabit Server Adapters (four ports total) NOTE: 1GB of memory is sufficient
to support up to eight Total Ports. 2GB of memory is required if nine or
more Total Ports have been selected.
Expansion Slots NOTE: Up to 6 PCI slots (PCIe slots are Gen 2). Standard riser with
PCIe (1) x8 FL/FH, (2) x4 HL/FH. Optional second risers with PCIe (1) x8,
(2) x4; or a PCIe/PCI-X mixed riser with (2) PCI-X, (1) x8; or a x16 225w
PCIe riser with (1) x16; or a (2) x8 Dual Port 10GbE riser.
Primary Riser
(Standard)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCI-e Gen2
x8
x16
6
Full Length/Full
Height
2
PCIe Gen2
x4
x8
12
Half length, full
height
3
PCIe Gen 2
x4
x8
15
Half length, full
height
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported
PCIe Riser
(Optional Secondary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
4
PCIe Gen2
x8
x16
18
Full Length/Full
Height
5
PCIe Gen2
x4
x8
24
Low Profile
6
PCIe Gen2
x4
x8
27
Low Profile
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported
PCIe/PCI-X Riser
(Optional Primary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCI-X
64-bit
N/A
7
Full length, Full
height
2
PCI-X
64-bit
N/A
7
Half Length, Full
Height
3
PCIe Gen 2
x8
x8
11
Half Length, Full
Height
NOTE: Bus number - Default
bus assignment (in decimal). Inserting cards with PCI bridges may alter
the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported NOTE: PCI-X support is limited to PCI-X cards only
PCIe/PCI-X
(Optional Secondary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
4
PCI-X
64-bit
N/A
19
Full Length/Full
Height
5
PCI-X
64-bit
N/A
19
Low Profile
6
PCIe Gen2
x8
x8
23
Low Profile
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported NOTE: PCI-X support is limited to PCI-X cards only
x16 PCIe Riser
(Optional Primary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCIe Gen2
x16
x16
6
Full Length/Full
Height
Supports up to
225W
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported
x16 PCIe Riser
(Optional Secondary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCIe Gen2
x16
x16
18
Full Length/Full
Height
Supports up to
225W
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported
(2) x8 PCI-E
Riser
(Optional Primary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCIe Gen2
x8
x16
6
Full Length/Full
Height
2
PCIe Gen2
x8
x16
9
Half length, full
height
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported NOTE: The shared network port is only supported in the secondary
riser connector
(2) x8 PCI-E
Riser
(Optional Secondary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
4
PCIe Gen2
x8
x16
18
Full Length/Full
Height
5
PCIe Gen2
x8
x16
21
Low Profile
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported NOTE: The shared network port is only supported in the secondary
riser connector
Storage Controller One of the following depending on Model
Entry Models:
HP Smart Array P410i/Zero Memory
Controller
Base Models:
HP Smart Array P410i/256 MB
Controller
High Performance Models:
HP Smart Array P410i/1G FBWC
Controller
Available upgrades:
1G FBWC, 512MB FBWC, 256MB, 512MB with BBWC, Battery kit upgrade (for the
256MB cache), and Smart Array Advanced Pack (SAAP) NOTE: RAID 6 and 60 requires purchase
of HP Smart Array Advanced Pack (516471-B21).
Internal Storage
Devices
Diskette Drive
None
Optical Drive One of the following depending on Model
None Standard
HP Slim SATA DVD RW Optical Drive (standard on Performance Models) NOTE: The Optical Drive option is
not available when you upgrade with the additional 8 SFF drive cage, or
in the LFF Models.
Hard Drives
None Standard
Hard Drive Bays
Standard (8) small form factor (SFF) hot-plug drive bays to support Serial-attached
SCSI (SAS) and Serial ATA (SATA) drives
Optional second drive cage for additional (8) SFF drive bays (total
16)
Optional cage for (6) Large Form Factor SAS/SATA hard drive bays
ACPI 2.0 Compliant
PCIe 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Server Power Cords
NOTE: If customers
require a power cord, they can check the power cord matrix for the appropriate
sku. Please see the following power cord matrix for details: http://www.hp.com/go/powercordmatrix
Common Slot ProLiant
HP has a new design for ProLiant power. The new Common Slot Power Supply
bay. This design provides the customer with commonality in power supplies
across multiple platforms to save on the cost of spares and allows HP
to offer multiple power solutions to fit the customers' needs. Many HP
ProLiant Servers come with Common Slot, High Efficiency power supplies
that allow you to right-size power supplies for your server configuration.
Common Slot (CS) designates commonality of the power supply across multiple
ProLiant servers. HP's new Common Slot power supplies are designed for
highest efficiency to provide power efficiency without degrading performance
of the ProLiant. Power Supplies will have efficiency ratings up to 94%.
There are three power wattage options to choose from - 460W, 750W, and
1200W - depending on the configuration of your server. To make sure you
select the correct power supply to meet your configuration, we suggest
that you use the HP Power Advisor (www.hp.com/go/hppoweradvisor)
to decide the "Right-Size" for your configuration. All HP Common
Slot power sources are UL, CE Mark Compliant, Hot Plug and Redundant.
It is highly recommended that you use the HP Power Calculator in defining
the "Right-Size" power supply for your needs.
HP's ProLiant Common Slot Power supplies (460W & 750W) meet multiple
Energy Efficiency Initiatives including Climate Savers Computing Initiative
GOLD, ECOS Consulting 80PLUS GOLD, and plans on offering models that meet
the Energy Star for Server requirements when they are published.
HP's ProLiant Common Slot Power supplies (1200W, 750W & 460W) meet
multiple Energy Efficiency Initiatives including Climate Savers Computing
Initiative Platinum and ECOS Consulting 80PLUS Platinum Power Supply requirements.
Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can
be purchased through power supply option kits (see Redundant Options for
part numbers).
NOTE: Pre-Configured Performance models
include two power supplies; Pre-Configured Base and Entry models include
one power supply. On CTO models, power supply must be selected from available
options.
System Fans
Hot plug fans ship standard,
N+1 fully redundant
(3+1) for 1 processor, (5+1) for 2 processors NOTE: Processor option kits include
2 additional fans when upgrading to 2 processors.
NOTE: For more
information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available
for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport
and our driver download page www.hp.com/support/DL385G7.
Graphics
Integrated ATI ES1000
16 bit color: maximum resolution of 1600 x 1200
32 bit color: maximum resolution of 1280 x 1024
NOTE: Maximum resolution available via
iLO3 remote console is 1280 x 1024 (for 32 bit color) and 1600 x 1200
(DVR max resolution).
Form Factor
Rack (2U), (3.5-inch)
HP Insight management software
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: http://www.hp.com/go/foundation.
The foundation pack includes:
NOTE: In an effort to support reducing
our environmental impact, the HP ProLiant Essentials Foundation Pack media
will be available as a selectable option for this server at time of order
of a CTO SKU. This will allow customers to order the number of media kits
that best meet their needs and eliminate receiving unnecessary duplicate
media.
HP Integrated Lights-Out
(iLO) for ProLiant
HP Integrated Lights-Out
(iLO) simplifies server setup, health monitoring, power and thermal control,
and lights-out remote administration of ProLiant ML, DL, and BL servers.
HP iLO functions without additional software and can be accessed from any
location via a web browser. HP iLO works hand-in-hand with HP Systems Insight
Manager, Insight Control, and Insight Dynamics for ProLiant, helping customers
unleash the value of the ProLiant platform and deliver the highest possible
quality of IT service. For more information, visit: www.hp.com/go/iLO
Intelligent Manageability
HP Systems Insight Manager software
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Security
Power-on password
Keyboard password
QuickLock, Network Server Mode
Serial interface control
Administrator's password
Warranty
This product is covered by a global
limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners resellers. Hardware diagnostic support and
repair is available for three years from date of purchase. Support for software
and initial setup is available for 90 days from date of purchase. Enhancements
to warranty services are available through HP Care Pack services or customized
service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite
support with next business day response. Warranty repairs may be accomplished
through the use of Customer Self Repair (CSR) parts. These parts fall into
two categories: 1) Mandatory CSR parts are designed for easy replacement.
A travel and labor charge will result when customers decline to replace
a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement
but may involve added complexity. Customers may choose to have HP replace
Optional CSR parts at no charge. Additional information regarding worldwide
limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP Insight Control,
a product option, delivers essential infrastructure management that can
help save time and money by making it easy to deploy, migrate, monitor,
remote control, and optimize your IT infrastructure through a single, simple
management console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP Insight
Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please
visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant
HP Insight Dynamics for ProLiant, a product
option, is advanced infrastructure management software that enables IT staff
to instantly adjust their environments to meet dynamic business demands
by provisioning, optimizing and protecting complex infrastructure in minutes.
It's a powerful toolkit, integrated-by-design, that accelerates complex
technology projects and simplifies daily operations, transforming data center
economics. With Insight Dynamics IT professionals can plan capacity and
power continuously, balance workloads across physical and virtual resources,
and ensure cost-effective high availability. It also enables IT organizations
to provision infrastructure consistently and automatically from pools of
shared resources using a self-service portal. Resources provisioned can
range from a single virtual machine to complex multi-tier environments and
their associated physical and virtual resource requirements. In addition
to the previous functional benefits, it also provides a cost-effective disaster
recovery for physical and virtual environments that works with HP StorageWorks
Continuous Access software for both the Enterprise Virtual Array and the
XP storage array allowing application environments to be reactivated in
minutes with the touch of a button to a remote location.
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance Computing,
with a choice of servers, networks and software. Operating system options
include specially priced offerings for Red Hat Enterprise Linux and Novell
SLES, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering. http://www.hp.com/go/clusters.
HP HPC Interconnects
High Performance
Computing (HPC) interconnect technologies are available for this server
as part of the HP Cluster Platform portfolio. These high-speed InfiniBand
and Gigabit interconnects are fully supported by HP when integrated within
an HP cluster. Flexible, validated solutions can be defined with the help
of configuration tools. http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management
Utility
HP Cluster Management
Utility (CMU) is an HP-licensed and HP-supported suite of tools that are
used to manage large-scale Linux ProLiant systems. CMU includes software
for the centralized provisioning, management and monitoring of nodes. CMU
makes the administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack
HP HPC Linux Value Pack (Value Pack) is an
HP-licensed and HP-supported specially priced software bundle for the development
and deployment of applications on HPC Cluster Platforms. Value Pack includes
the Platform HPC Enterprise Edition suite of tools including the LSF workload
scheduler, the HP-MPI parallelization library. Also included are the HP
Unified Parallel C compiler and the HP Shmem library, as well as the execution
environments for the libraries and compiler. HP
HPC Linux Value Pack
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure-Enterprise Configurator
now provides factory default racking for our HP hardware portfolio. This
approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration,
please contact HP's Customer Business Center or an Authorized Partner for
assistance. http://www.hp.com/products/configurator.
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires
a service partner who understands your increasingly complex business technology
environment. That's why it makes sense to team up with the people who
know HP infrastructure hardware and software best - the experienced professionals
at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test,
integrate, support, and manage IT and infrastructure solutions. This way,
HP proposes services solutions that include more than just uplift of base
warranty. You can get the support you need by choosing from one of a number
of service packaged solutions we have designed to address wider set of
customer support needs:.
HP Technology Services meets business challenges with services offered
in three packages - Optimized Care Package, Standard Care Package,
and Basic Care Package - available for each product group. Such packaged
solutions enable customers to optimize technology operations, minimize
risk and drive better business outcomes with easy-to-buy, easy-to-use
scalable support packages for servers, storage, networking and software.
Optimized Care
Optimized Care Package: Supports
maintaining servers at optimum performance availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
HP Installation and Startup for Insight Control Software
Provides for the deployment and basic configuration of HP Insight Control
on HP ProLiant ML and DL series servers or HP BladeSystem servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
3-Year HP Critical Advantage
Provides end-to-end infrastructure support solution for business critical
applications running on virtualized/x86 infrastructures, enabling the customers
to cost effectively build, operate, and continuously improve their IT environment http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA3-1772ENW
Additional Services: Microsoft or Linux or VMware education courses
+ Facility & technology environmental assessment services + Energy Efficiency
Design, Factory Express
Standard Care
Standard Care Package: Package
that maintains high level of server availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
HP Installation and Startup for Insight Control Software
Provides for the deployment and basic configuration of HP Insight Control
on HP ProLiant ML and DL series servers or HP BladeSystem servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
Provides an IT manager with a team of support specialists who will quickly
begin troubleshooting the system to help return the hardware to operating
condition within 6 hours of the initial service request to the HP Global
Solution Center http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control
on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) &
VMware Installation & Start Up, and Software Support; Install and Startup
Services for Insight Control; Microsoft or Linux or VMware education courses;
+30 Proactive Select Credits, Factory Express
Basic Care
Basic Care Package: delivers minimum recommended support service level
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
HP Installation and Startup for Insight Control Software
Provides for the deployment and basic configuration of HP Insight Control
on HP ProLiant ML and DL series servers or HP BladeSystem servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides for the deployment and basic configuration of HP Insight Control
on HP ProLiant ML and DL series servers or HP BladeSystem servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control
on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat)
& VMware Installation & Start Up and Software Support); +10 Proactive
Select Credits, Factory Express
Insight Remote Support
The packages include HP Insight Remote Support that uses proven technology
to deliver secure, reliable 24x7 remote monitoring, diagnoses, and problem
resolution. It is available at no additional cost to all warranty, HP
Care Pack Service, and service agreement customers.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please
contact your HP sales representative or HP Authorized Channel Partner.
Or visit: http://www.hp.com/services/proliant
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section. NOTE: Pre-configured models ship with the configurations below. Options
can be selected from the Core or Additional options section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured
models. Any additional options purchased will be shipped separately. NOTE: If you desire a custom configuration please see "Configuration
Information - Factory Integrated Models" section of this QuickSpecs.
Performance Models NOTE:
Preconfigured Performance models save valuable deployment time at a discounted
bundle price.
HP ProLiant
DL385 G7 6174 2P 16GB-R P410i/1GB FBWC 8 SFF 750W RPS Perf IC Sever
573087-001
Processor(s)
(2) Twelve-Core AMD Opteron™
Processor Model 6174 (2.2 GHz, 80W)
Cache Memory
12MB L3 cache
Memory
16GB (8 x 2GB) PC3-10600R (DDR3-1333)
Registered DIMMs NOTE: Total of 24 DIMM slots.
Network Controller
Two HP NC382i Dual Port Multifunction
Gigabit Server Adapters (four ports total)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on configurable product offerings
and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis. NOTE: FIO indicates that this option is only available as a factory
installable option.
Step
1: Base Configuration (choose one of the following configurable models)
HP
Models
HP ProLiant DL385
G7 SFF Configure-to-order Server
573122-B21
Factory Integrated
Model ships with:
(8) SFF Serial Attached
SCSI (SAS) Drive Bays
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports
total)
HP Smart Array P410i/Zero Memory Controller
PCI-Express Riser Cage
One IEC Power cord
Hot plug fans (fully redundant) NOTE: 4 fans one processor models;
6 fans two processor models Rack (2U), (3.5-inch)
HP ProLiant DL385
G7 LFF Configure-to-order Server
573123-B21
Factory Integrated
Model ships with:
(6) LFF Serial Attached
SCSI (SAS) Drive Bays NOTE: LFF configuration does not
support internal optical drive
Two HP NC382i Dual Port Multifunction Gigabit Server Adapters (four ports
total)
HP Smart Array P410i/Zero Memory Controller
PCI-Express Riser Cage
One IEC Power cord
Hot plug fans (fully redundant) NOTE: (4 fans one processor models;
6 fans two processor models)
Rack (2U), (3.5-inch) NOTE: This option removes the optical
media bay and 8 SFF drive bays
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP
Processors
NOTE:
If two processors are desired, select one xxxxxx-B21 and one xxxxxx-B21.
Twelve-Core Processors
HP DL385 G7 AMD Opteron™
6180SE (2.5GHz/12-core/12MB/105W) FIO Processor Kit
636080-B21
HP DL385 G7 AMD Opteron™
6176SE (2.3GHz/12-core/12MB/105W) FIO Processor Kit
NOTE:
Prior to making a power supply selection it is highly recommended that the
HP Power Advisor is run to determine the right size power supply for your
server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP 460W Common Slot
Gold Hot Plug Power Supply Kit
NOTE:
For additional HP Storage Controller options see Additional Options
section of this QuickSpec.
HP
Performance Packs
The HP ProLiant DL385
G7 performance packs are necessary to configure a HP ProLiant DL385 G7 Performance
Model. HP ProLiant DL385 G7 Performance model includes the latest performance
technologies and enterprise class availability features pre-installed for
convenience and value. The performance pack includes a 2nd processor, two
additional fans, 1G/FBWC, a second 750W CS HE power supply and Insight Control
(ICE) license. To complete the configuration of a Performance model, select
the Slim SATA DVD-RW Optical Drive Kit (481043-B21).
HP DL385G7 6174 HPM
FIO Perf Pack
585334-B21
HP DL385G7 6180SE
HPM FIO Perf Pack
636089-B21
HP
Insight Software
HP Insight Control
including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO License
582765-B21
HP Insight Control
for Linux including 1yr 24x7 Support ML/DL Bundle 1 Server FIO License
TC203A
Step 4: Choose
Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" and
"Additional Options" section below.
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
HP
Unique Options
HP StorageWorks RDX160
Removable Disk Backup System DL Server Module NOTE: Mounts in DL385 G6 second drive
cage slot (160GB of Disk Storage)
AP724A
HP StorageWorks RDX320
Internal Removable Disk Backup System for DL Servers NOTE: 320GB of disk capacity per
data cartridge. NOTE: Mounts in DL385 G7 second drive cage slot (320GB of Disk Storage)
AP725A
HP StorageWorks RDX500
Internal Removable Disk Backup System for DL Servers NOTE: 500GB of disk capacity per
data cartridge. NOTE: Mounts in DL385 G7 second drive cage slot (500GB of Disk Storage)
AP726A
HP StorageWorks RDX750
Internal Removable Disk Backup System for DL Servers NOTE: 750GB of disk capacity per
data cartridge. NOTE: Mounts in DL385 G7 second drive cage slot (750GB of Disk Storage)
AW578A
HP StorageWorks RDX
1TB Internal Removable Disk Backup System for DL Servers NOTE: 1 TB of disk capacity per data
cartridge. NOTE: Mounts in DL385 G7 second drive cage slot (1 TB of Disk Storage)
BV848A
HP DL385G7 8SFF Cage
Kit
607248-B21
HP Processors
Twelve-Core Processors
HP DL385 G7 AMD Opteron™
6176SE (2.3GHz/12-core/12MB/105W) Processor Kit
NOTE: Second processor
kits include additional two fans.
HP Memory
NOTE: DIMM banks
are active only when the corresponding processor socket is populated. NOTE: For detailed memory configuration rules and guidelines, please
use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
HP Slim SATA DVD-RW Optical Drive NOTE: Included in performance models.
481043-B21
HP Mobile USB DVDRW Drive
BU516AA#ABA
HP Hard Drives
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives
HP 600GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive
10 Gigabit Ethernet adapters NOTE: No more than two 10GbE I/O
devices are supported in a single ProLiant server. NOTE: A minimum of two Gigabytes (2 GB) of server memory is required
per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
HP DL38X (2) x8 PCI-E Riser Kit NOTE: This riser card will support
Qty 2 of 10Gbe NICs or can be used for 2 additional PCIe Gen2 cards. NOTE: The shared network port is only supported in the secondary
riser connection.
494326-B21
HP DL385 x8/2x4 PCI-E riser kit
581783-B21
HP DL385 G7 PCI-X riser kit
581785-B21
HP Power Supplies
NOTE: Prior to
making a power supply selection it is highly recommended that the HP Power
Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
HP 460W Common Slot Gold Hot Plug
Power Supply Kit
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
HP
Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical
Support and Updates Electronic License
T9074BAE
HP Smart Buy Insight Control suite, No Media,
Electronic License including 1 year of 24x7 Technical Support and Updates
T9074ASE
HP Insight Control including 1yr 24x7 Support
ProLiant ML/DL/BL-bundle Electronic License
TC278AAE
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
Server License
452148-B22
HP S-Buy Insight Control, Single-Server
License including 1 year of 24x7 Technical Support and Updates
452148-S22
HP Insight Control including 1yr 24x7 Support
ProLiant ML/DL/BL-bundle Tracking License
TC275A
NOTE: Electronic and Flexible-Quantity
licenses can be used to purchase multiple licenses with a single activation
key. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates. NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux w/1yr 24x7 Supp
ML/DL/SL Bundle Electronic 1 Svr LTU
TC203AAE
HP Insight Control for Linux including 1yr
24x7 Support Electronic License
TC213AAE
HP Smart Buy Insight Control for Linux,
1-server license, including one year of 24x7 Technical Support and Updates,
Electronic
TC213ASE
HP Insight Control for Linux including 1yr
24x7 Support Single Server License
TC209A
HP Insight Control for Linux Media Kit NOTE: Media pack DVD contains the
ISO image for HP Insight Control for Linux, HP Systems Insight Manager,
HP Insight Control power management, HP Insight Control virtual machine
management, and an integrated installer. Servers must be acquired separately.
TC208A
NOTE: Licenses ship without
media. The Media Kit for Insight Control for Linux can be ordered separately,
or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button). NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single set of activation keys. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out (iLO) Advanced
HP iLO Advanced including 1yr 24x7 Technical
Support and Updates Electronic License
TA850AAE
HP iLO Advanced including 1yr 24x7 Technical
Support and Updates Single Server License
HP Insight Software Media Kit NOTE: Insight Software DVD media
without licenses. Contains HP Systems Insight Manager, HP Insight Control,
HP Insight Dynamics, HP Insight Control for Microsoft System Center, and
Virtual Connect Enterprise Manager software. Uses an integrated installer
to perform quick and accurate software installation and updates.
436222-B21
NOTE: This license allows
1 server to be deployed and managed via HP iLO Advanced. Customer will receive
a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service. NOTE: For additional license kits, including electronic delivery
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
High
Performance Clusters
HP Cluster Management Utility
HP Cluster Management Utility Compute Node Flexible License NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one node (server). Customer will receive a printed
end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online
in order to obtain a license key.
QL803A
HP Cluster Management Utility License and
Media NOTE: Order a minimum of one license
per cluster to purchase media including software and documentation, which
will be delivered to the customer, and also licenses CMU management. No
license key is delivered or required.
HP High Performance Computing Linux Value
Pack 1 Processor Flexible License NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one socket (a.k.a. processor). Customer will receive
a printed end user license agreement and license entitlement certificate
via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
TC293B
HP High Performance Computing Linux Value
Pack Media Kit NOTE: This part number can be used
to purchase media including software and documentation, which will be delivered
to the customer.
NOTE:
The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These
artifacts can include passwords, certificates and encryption keys. Windows®
BitLocker™ Drive Encryption (BitLocker) is a data protection feature available
in Windows Server® 2008. BitLocker leverages the enhanced security capabilities
of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker
to help protect user data and to ensure that a server running Windows Server
2008 has not been tampered with while the system was offline. For more information
about TPM, including a white paper, go to: www.hp.com/go/TPM. NOTE: ProLiant OS pre-installed units will come with the partition
required for TPM deployment. NOTE: The TPM key is unique to every TPM deployed server and must
be retained. Misplacing or losing the key could result in data loss.
HP Storage Controllers
SAS Controllers
HP Smart Array P212 Controller
HP Smart Array P212/ZM 1-ports
Int/1-ports Ext PCIe x8 SAS Controller
HP Smart Array Advanced Pack including
1yr 24x7 Technical Support and Updates Single Server License NOTE: This part number can be used
to purchase a single license or to order multiple licenses with a single
activation key. Customers will receive a license entitlement certificate
via e-mail. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Include one
year of 24x7 HP Software Technical Support Services.
HP Modular Smart Array SC08e 2-ports
Ext PCIe x8 SAS Host Bus Adapter NOTE: This is a 2 x4 External Port
HBA NOTE: This is only approved for the HP StorageWorks P2000 G3 SAS
Modular Smart Array.
NOTE: For the
complete range of StorageWorks tape drives, autoloaders, libraries and media
see: http://www.hp.com/go/tape.
For hardware and software compatibility of HP StorageWorks tape backup products
see: http://www.hp.com/go/connect.
HP StorageWorks DAT 320 USB in
1U Rack-mount Kit
AP835B
HP StorageWorks 1/8 G2 LTO-4 Ultrium
1760 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack Kit (AH166A) for rack installation. Connection using HP P212 SAS Smart
Array Controller ( 462828-B21) recommended.
AK377A
HP StorageWorks DAT 320 SAS Internal
Tape Drive NOTE: For installation into 1U SAS
rack kit (AE459B) or 3U SAS rack kit (AG576B). No peripheral bay available
for installation into the server. Connection using HP Smart Array P212/Zero
Memory Controller ( 462828-B21) recommended.
AJ830A
HP StorageWorks LTO-4 Ultrium
1760 SAS (1) in 1U Rack-mount Kit NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
EH946B
HP StorageWorks LTO-5 Ultrium
3000 SAS Tape Drive in 1U Rackmount NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
EJ014A
HP StorageWorks 1/8 G2 LTO-5 Ultrium
3000 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack Kit (AH166A) for rack installation. Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
BL536A
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1760 SAS Tape Library
AK378A
HP StorageWorks MSL2024 1 LTO-5
Ultrium 3000 SAS Tape Library NOTE: Connection using HP P212 Smart
Array Controller SAS ( 462828-B21) recommended.
BL537A
HP StorageWorks MSL4048 2 LTO-4
Ultrium 1760 SAS Tape Library
AK380A
HP StorageWorks MSL4048 2 LTO-5
Ultrium 3000 SAS Tape Library NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
HP StorageWorks D2D Backup Systems
with Backup Data Deduplication
HP StorageWorks D2D2502i Backup
System NOTE: 1.5TB of useable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ001B
HP StorageWorks D2D2504i Backup
System NOTE: 3.0TB of useable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ002B
HP StorageWorks D2D4004i Backup
System NOTE: 3.0TB (expandable to 7.5TB)
of useable network disk backup capacity. Network connected appliance with
connectivity using the iSCSI protocol. If the server requires a hardware
iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
EH938A
HP StorageWorks D2D4112 Backup
System NOTE: 9.0TB (expandable to 18.0TB)
of useable network disk backup capacity. Fibre Channel SAN connected appliance.
Direct server attach is not supported, requires connection via SAN fabric.
EH993B
HP StorageWorks RDX Removable
Disk Backup Systems USB NOTE: Connect the USB tape power
connector to the secondary SAS power connector on the system board. Refer
to the hood label for SAS power connector locations on the system board. NOTE: Mounts in DL385 G7 second drive cage slot.
HP StorageWorks RDX160 Removable
Disk Backup System DL Server Module NOTE: Mounts in DL385 G6 second drive
cage slot (160GB of Disk Storage)
AP724A
HP StorageWorks RDX320 Internal
Removable Disk Backup System for DL Servers NOTE: 320GB of disk capacity per
data cartridge.
AP725A
HP StorageWorks RDX500 Internal
Removable Disk Backup System for DL Servers NOTE: 500GB of disk capacity per
data cartridge.
AP726A
HP StorageWorks RDX750 Internal
Removable Disk Backup System for DL Servers NOTE: 750GB of disk capacity per
data cartridge.
AW578A
HP StorageWorks RDX 1TB Internal
Removable Disk Backup System DL Servers NOTE: 1 TB of disk capacity per data
cartridge.
HP R5500 5000kVA 3U Rackmount
Uninterruptible Power System
AF426A
HP R/T3000 Uninterruptible Power
System (UPS)
HP R/T3000 3300VA High Voltage
2U Rackmount Uninterruptible Power System
AF453A
HP Smart Buy R/T3000 UPS, High
voltage
AF453S
HP Smart Buy R/T3000 UPS, Low
voltage
AF452S
NOTE: Additional
HP Uninterruptible Power Systems (UPS) are available for this equipment.
For information on all HP UPSs and accessories please go to www.hp.com/products/ups
NOTE: For additional
information on sizing your HP UPS, please reference: http://www.upssizer.com NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord Matrix"
link. That link will list cable descriptions, requirements, and specifications
for UPS and PDU units. Please see the following link: www.hp.com/products/powercords.
Power Distribution Units
HP Monitored Power Distribution
Unit: Half Rack Version
HP 4.9 kVA S124 Monitored PDU-
single input, 1Ø, 24A
AF914A
HP Monitored Power Distribution
Unit: Full Rack Version
HP 8.6 kVA S1324 Monitored PDU-
single input, 3Ø, 24A
Modular Power Distribution Units
1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets shipped
with the unit (optimized for 10000 and 9000 series racks).
HP Modular Power Distribution
Units (mPDU), High Volt Model, 24A (200-240 VAC)
8.3kVA Model - mPDU, 40A, High
(power cord attached)
252663-D73
HP Modular Power Distribution
Units (mPDU), High Volt Model, 16A (200-240 VAC) NOTE: This PDU has a detachable input
power cord and allows for adaptability to country specific power requirements.
NOTE: Please see
the following QuickSpecs for additional options including shorter jumper
cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html NOTE: For additional information on HP Power Distribution Units including
accessories please go to: www.hp.com/go/pdu. NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord Matrix"
link. That link will list cable descriptions, requirements, and specifications
for UPS and PDU units. Please see the following link: www.hp.com/products/powercords.
HP Rack Series
HP Rack 10000 G2 Series
(Carbon/Graphite Metallic)
NOTE: The increasing
power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced
airflow for maximum cooling, allowing these racks to be fully loaded with
servers using the latest processors. CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and
rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to
the required 64 percent open area for ventilation). Side: The clearance
between the installed rack component and the side panels of the rack must
be a minimum of 2.75 inches (7 cm). CAUTION: Always use blanking panels to fill all remaining empty front
panel U-spaces in the rack. This arrangement ensures proper airflow. Using
a rack without blanking panels results in improper cooling that can lead
to thermal damage.
NOTE: Quick deploy
rail system provides tool-free support for racks with square or round mounting
holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an
adjustment range of 24" - 36". The ambidextrous cable management
arm can be mounted on either the left or right side for improved cable management.
HP
Rack Options
Keyboards and Monitors
HP TFT7600 G2 KVM Console Rackmount
Keyboard US Monitor
HP 4GB Secure Digital Flash
Media Kit NOTE: Blank SD media device is supported
for use with VMware and Citrix. SD media must be installed in the internal
slot of the ProLiant server. Learn more at: http://www.hp.com/go/proliantvirtualization.
580387-B21
HP 2GB USB Flash Media Drive
Key NOTE: HP qualified blank USB key
for use with HP ProLiant servers that support the VMware virtualization
environment and other HP value-add software like SmartStart. HP recommends
this industry standard USB flash device for use with VMware ESXi. USB device
must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP
VMware Getting Started Guide for installation instructions.
608447-B21
HP Care Pack Services
Hardware Services Response On-site
Service
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic
U4544E
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 4 Years, Electronic
U8101E
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 5 Years, Electronic
U8067E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 4 Years, Electronic
U8181E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 5 Years, Electronic
U8084E
Hardware Services Call to Repair
On-site Service
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4546E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 4 Years, Electronic
UA010E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 5 Years, Electronic
UA009E
24-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UP717E
24-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 4 Years, Electronic
UP718E
24-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 5 Years, Electronic
UP719E
Installation & Start-up Services
Hardware Installation, Electronic
U4554E
Installation & Start-Up of
a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.
HP holidays, Electronic
U4555E
Support Plus
Onsite HW support, 8am-9pm, M-F,
4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion,
8am-9pm, M-F 2hr response time excl. HP holidays, Electronic
U4556E
Support Plus 24
Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U4557E
Onsite HW support 24x7, 4hr response
and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
Advanced ECC memory is the memory protection mode for this server.
In Advanced ECC, the server does not fail because of correctable memory
errors. The server provides notification if the level of correctable
errors exceeds a pre-defined threshold rate.
Advanced ECC provides additional protection over standard ECC because
it is possible to correct certain memory errors that would otherwise
be uncorrectable and result in a server failure.
Whereas standard ECC can correct single-bit memory errors, Advanced
ECC can correct single-bit memory errors and multi-bit memory errors
if all failed bits are on the same DRAM device on the memory module.
Online Spare memory
Online Spare memory mode is a higher level of memory protection that
complements Standard Memory mode with Advanced ECC. With Online Spare
mode, a DIMM with a rank of memory at least as large as the other ranks
in the system, or memory board, is designated as the Online Spare rank.2
If one of the other DIMMs exceeds a threshold rate of correctable memory
errors, the affected rank of memory within that DIMM is taken offline
and the data is copied to the Online Spare rank. This capability maintains
server availability and memory reliability without service intervention
or server interruption. The DIMM that exceeded the error threshold can
be replaced at the customer's convenience during a scheduled shutdown.
Online Spare reduces the chance of an uncorrectable error bringing down
the system; however, it does not fully protect the system against uncorrectable
memory errors.
Online Spare mode is beneficial to businesses with sites that do not
have IT staff available to service a failure, do not always have replacement
memory readily available, or cannot bring down the server until a scheduled
shutdown. The cost of implementation for Online Spare over Advanced
ECC is the hardware cost of the extra DIMMs for the spare memory bank.
The user configures the system for Online Spare mode through the RBSU3.
Online Spare configuration requirements vary for each server series,
but it does not require operating system support or special software
beyond the System BIOS. However, if messaging and logging are desired
at the console along with messages in HP Systems Insight Manager, an
operating system must be used that has system management and agent support
for Advanced Memory Protection.
Population order
The two tables below represent the memory module population order
for one processor. The population order for the other processor is identical.
SR denotes Single Rank, DR denotes Dual Rank, and QR denotes Quad Rank.
All memory modules must follow the population order shown in these
two tables for both processors with the following exception:
QR memory modules must be installed only in memory sockets 2, 5, 8,
and 11, while following the population order for those memory sockets.
Processor memory socket
1
2
3
4
5
6
Rank support per memory socket
SR/DR
SR/DR/QR
SR/DR
SR/DR
SR/DR/QR
SR/DR
Population order
A
I
E
C
K
G
Processor memory channel
A
A
A
B
B
B
Processor memory socket
7
8
9
10
11
12
Rank support per memory socket
SR/DR
SR/DR/QR
SR/DR
SR/DR
SR/DR/QR
SR/DR
Population order
B
J
F
D
L
H
Processor memory channel
C
C
C
D
D
D
Population rules
When installing memory modules, observe the following population rules:
Use only HP memory modules listed in this document.
Advanced ECC is not available if x4 and x8 memory modules are mixed
in channels (A and B), (C and D), or both, but standard ECC is still
available. Advanced ECC is available if x4 and x8 memory modules are
mixed in memory channels (A and C), (B and D), or both.
No more than two UDIMMs may be installed per channel.
Do not mix UDIMMs and RDIMMs within this server.
Population guidelines
While adhering to the memory population rules ("Population rules"
- see above), performance can be improved by following the guidelines
below:
Memory modules may be installed one at a time per processor, but installing
two at a time per processor provides for additional performance, installing
four at a time per processor provides for better performance, and installing
equal amounts of memory for both processors provides for best performance.
Install all memory modules of the same speed on the same processor
for best performance.
Install all memory modules of the same voltage on the same processor
for best power.
Memory bus speed
Depending on the quantity and native speed of memory modules installed,
memory bus speeds can be 1333 MHz, 1066 MHz, 800 MHz, or 667 MHz. Memory
bus speeds can be different for each processor.
To determine memory bus speeds, do the following:
Within RBSU, select the Power Management Options menu > Advanced
Power Management Options menu > Maximum Memory Bus Frequency
menu.
Select one of the following menu options:
Auto (default) - The memory bus speed is set to what is
shown in the following table. If the native speed of the installed
memory module is slower than the memory bus speed, the memory bus
speed is set to the memory module native speed
Memory modules per channel
QR
SR or DR
Memory module native speed
Memory bus speed (standard-voltage
memory module)
Memory bus speed (low-voltage memory
module)
1
-
1*
SR 1333 MHz
DR 1333 MHz
DR 1066 MHz
1333 MHz
1066 MHz
1
1
-
QR 1066 MHz
1066 MHz
1066 MHz
2
-
2*
SR 1333 MHz
DR 1333 MHz
DR 1066 MHz
1333 MHz
1066 MHz
2
1
1
SR 1333 MHz
DR 1333 MHz
DR 1066 MHz
QR 1066 MHz
800 MHz
800 MHz
3
-
3 SR
SR 1333 MHz
1066 MHz
1066 MHz
3
-
3 DR
DR 1333 MHz
DR 1066 MHz
1066 MHz
800 MHz
3
-
3 mixed
SR 1333 MHz
DR 1333 MHz
DR 1066 MHz
1066 MHz
800 MHz
3
1
2
SR 1333 MHz
DR 1333 MHz
DR 1066 MHz
QR 1066 MHz
800 MHz
667 MHz
*These are the
only configurations supported by UDIMMs. All configurations listed
in this table are supported by RDIMMs.
This table is for reference only.
800 MHz-The memory bus speed is set to 800 MHz regardless
of the quantity of memory modules installed, unless the table above
reflects a slower memory bus speed. NOTE: There may be more than
one memory bus speed menu option. NOTE: LVDIMM support is dependent on the ROM version
Memory Installation Examples
These memory installation examples show the memory sockets associated
with the first processor only. If there is a second processor installed,
like for a performance model, then these examples can be applied toward
the memory sockets associated with the second processor also.
2 RDIMMs per processor
Standard memory: 2x2GB RDIMMs (4GB per processor)
Optional memory: Adding 10x8GB RDIMMs to standard memory (84GB per
processor)
Maximum memory: Replacing standard memory with 4x16GB QR RDIMMs and
8x8GB DR RDIMMs (maximum of 128GB per processor)
Processor memory socket
1
2
3
4
5
6
Standard Memory
2GB DR
Optional Memory
2GB DR
8GB DR
8GB DR
8GB DR
8GB DR
8GB DR
Maximum Memory
8GB DR
16GB QR
8GB DR
8GB DR
16GB QR
8GB DR
Processor memory socket
7
8
9
10
11
12
Standard Memory
2GB DR
Optional Memory
2GB DR
8GB DR
8GB DR
8GB DR
8GB DR
8GB DR
Maximum Memory
8GB DR
16GB QR
8GB DR
8GB DR
16GB QR
8GB DR
2 UDIMMs per processor
Standard memory: 2x2GB UDIMMs (4GB per processor)
Optional memory: Adding 6x4GB UDIMMs to standard memory (28GB per
processor)
Maximum memory: Replacing standard memory with 8x4GB UDIMMs (maximum
of 32GB per processor)
Processor memory socket
1
2
3
4
5
6
Standard Memory
2GB DR
Optional Memory
2GB DR
4GB DR
4GB DR
4GB DR
Maximum Memory
4GB DR
4GB DR
4GB DR
4GB DR
Processor memory socket
7
8
9
10
11
12
Standard Memory
2GB DR
Optional Memory
2GB DR
4GB DR
4GB DR
4GB DR
Maximum Memory
4GB DR
4GB DR
4GB DR
4GB DR
4 RDIMMs per processor
Standard memory: 4x2GB RDIMMs (8GB per processor)
Optional memory: Adding 8x8GB RDIMMs to standard memory (72GB per
processor)
Maximum memory: Replacing standard memory with 4x16GB QR RDIMMs and
8x8GB DR RDIMMs (maximum of 128GB per processor)*
Processor memory socket
1
2
3
4
5
6
Standard Memory
2GB DR
2GB DR
Optional Memory
2GB DR
8GB DR
8GB DR
2GB DR
8GB DR
8GB DR
Maximum Memory
8GB DR
16GB QR
8GB DR
8GB DR
16GB QR
8GB DR
Processor memory socket
7
8
9
10
11
12
Standard Memory
2GB DR
2GB DR
Optional Memory
2GB DR
8GB DR
8GB DR
2GB DR
8GB DR
8GB DR
Maximum Memory
8GB DR
16GB QR
8GB DR
8GB DR
16GB QR
8GB DR
* If you
have a 2P system and want the maximum memory of 256GB installed, you will
need to replace all standard memory with 8x16GB QR RDIMMs and 16x8GB DR
RDIMMs.
Following are memory
options available from HP:
HP Memory
NOTE: DIMM banks
are active only when the corresponding processor socket is populated.
Sixteen SFF SAS hot plug hard
drive bays NOTE: This configuration does not
support optical drive. NOTE: This configuration requires a second controller or SAS Expander
Card.
1-6
Six LFF SAS hot plug hard drive
bays NOTE: This configuration does not
support optical drive. NOTE: This configuration replaces SFF hard drive cage.
NOTE:
Connect the SAS power cable from the primary drive cage (drive cage containing
SFF drives 1-8 or LFF drives 1-6) to the primary SAS power connector on
the system board. If a secondary drive cage (drive cage containing SFF drives
9-16) is installed, connect a SAS power cable from the secondary drive cage
to the secondary SAS power connector on the system board. Refer to the hood
label for SAS power connector locations on the system board.
Drive Support
Quantity
Supported
Position
Supported
Controller
Removable Media
Slim SATA DVD RW Optical Drive NOTE: Included in performance models.
Only 1 available removable media bay
Slimline bay
Integrated SATA
Slim SATA DVD-ROM Optical Drive
Only 1 available removable media bay
Slimline bay
Integrated SATA
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. NOTE: IMPORTANT: Installation of both SAS and SATA hard drives or
a mixture of SSDs and traditional hard drives in a single RAID volume is
not supported.
SAS Hot Plug SFF (2.5-inch)
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
500GB 6G SAS 10K DP
300GB 6G SAS 10K DP
146GB 6G SAS 15K DP
146GB 6G SAS 10K DP 72GB 6G SAS 15K DP
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SAS Hot Plug LFF (3.5-inch)
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
450GB 6G SAS 15K DP
300GB 6G SAS 15K DP
Up to 6
1-6
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SAS Hot Plug SFF (2.5-inch)
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 6G SAS 7.2K DP
500GB 6G SAS 7.2K DP
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SAS Hot Plug LFF (3.5-inch)
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 6G SAS 7.2K DP
1TB 6G SAS 7.2K DP
Up to 6
1-6
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SATA Hot Plug SFF (2.5-inch) Midline
(MDL) Drives
Quantity
Supported
Position
Supported
Controller
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SATA Hot Plug LFF (3.5-inch) Midline
(MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
Up to 6
1-6
HP Smart Array P212/Zero Memory
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SATA Hot Plug SFF
(2.5-inch) Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 5.4K
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SATA Hot Plug LFF
(3.5-inch) Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 6
1-6
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SATA Hot Plug Midline
(MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD
Up to 16
1-8
1-16
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
SATA Hot Plug 3.5"
Midline (MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD
Up to 6
1-6
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/512 BBWC Controller
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
60 Modular Smart Array
Up to 4
External
HP Smart Array P212/256 MB Controller
Up to 8
External
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 BBWC Controller
HP Smart Array P411/1G Flash Backed Cache Controller
HP Smart Array P812/1G Flash Backed Cache Controller
70 Modular Smart Array
Up to 2
External
HP Smart Array P212/ 256 MB Controller
Up to 4
External
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/1G Flash Backed Cache Controller
HP Smart Array P812/1G Flash Backed Cache Controller
D2600 Disk Enclosure
Up to 4
External
HP Smart Array P212/ 256 MB Controller
Up to 8
External
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB Controller
HP Smart Array P411/1G Flash Backed Cache Controller
HP Smart Array P812/1G Flash Backed Write Cache Controller
D2700 Disk Enclosure
Up to 2
External
HP Smart Array P212/256 MB Controller
Up to 4
External
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB Controller
HP Smart Array P411/1G Flash Backed Cache Controller
HP Smart Array P812/1G Flash Backed Write Cache Controller
Maximum Storage Capacity - (with MSA70)
Internal
9.6TB (16 x 500GB
SAS/SATA)
External
12.5TB (250 x 500GB
SAS/SATA SFF)
Total
20.5TB
Tape and Disk Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape.
For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk and tape
backup products see: http://www.hp.com/go/connect.
Position
Supported
Controller
Controller Part Number
HP StorageWorks SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter
HP StorageWorks Fibre Channel
Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS
connectivity matrix at: http://www.hp.com/go/ebs
for connectivity information and the supported Fibre Channel HBAs shown
in this QuickSpecs.
N/A
HP StorageWorks USB RDX Removable Disk Backup System
RDX160
RDX320
RDX500
RDX750
RDX1TB
Internal or External
USB 2.0 Port
N/A
HP StorageWorks D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If
the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
HP StorageWorks D2D Backup Systems,
Fibre Channel
D2D4000fc
Maximum
(all hard drives, power supply, and processor installed)
60 lb (27.22 kg)
Minimum
(one hard drive, power supply, and processor installed)
45.90 lb (20.81 kg)
Input Requirements
(per power supply)
Rated Line Voltage
100 to 120 VAC
200 to 240 VAC
Rated Input Current
For 1200 W Power Supply:
10 A (at 100 VAC),
4.9 A (at 200 VAC)
For 750 W Power Supply:
8.9 A (at 100 VAC),
4.3 A (at 200 VAC)
For 460 W Power Supply:
5.5 A (at 100 VAC),
2.6 A (at 200 VAC)
Rated Input Frequency
50 to 60 Hz
Rated Input Power
For 1200 W Power Supply:
930 W (at 100 VAC),
1348 W (at 200 VAC)
For 750 W Power Supply:
857 W (at 100 VAC),
824 W (at 200 VAC)
For 460 W Power Supply:
526 W (at 100 VAC),
505 W (at 200 VAC)
BTU Rating
Maximum
For 1200 W Power Supply:
3530 BTU/hr (at 100 VAC),
4600 BTU/hr (at 200 VAC)
For 750 W Power Supply:
2925 BTU/hr (at 100 VAC),
2812 BTU/hr (at 200 VAC)
For 460 W Power Supply:
1794 BTU/hr (at 100 VAC),
1725 BTU/hr (at 200 VAC)
For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
Maximum Peak Power
For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
System Inlet Temperature
Operating
10° to 35°C
(50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be limited by the type
and number of options installed.
System performance may be reduced if operating with a fan fault or above
30°C (86°F).
Non-operating
-30° to 60°C
(-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10 to 90% relative
humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
Non-operating
5 to 95% relative
humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft).
This value may be limited by the type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft).
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared
A-Weighted sound power levels (LWAd) and declared average bystander position
A-Weighted sound pressure levels (LpAm) when the product is operating in
a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). NOTE: The Listed sound levels apply
to standard shipping configurations. Additional options may result in increased
sound levels.
Idle
1P SKU
2P SKU
LWAd
4.1 B
4.5 B
LpAm
23 dBA
25 dBA
Operating
1P SKU
2P SKU
LWAd
5.3 B
5.6 B
LpAm
36 dBA
38 dBA
Emissions Classification
(EMC)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022;
EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2;
EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements. NOTE: The Listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.
HP Integrated Lights-Out
3 (iLO 3)
integrated on system board
Architecture
PCI Express based health and remote
management ASIC
Processor
PCI Express RISC processor core
running at 250MHz
Upgradeability
Option firmware upgradeable via
Flash ROM.
Video Support
1600 x 1200 DVR max resolution
Interfaces
One Ethernet Sideband connection
(10/100/1000 Mb/s)
One Ethernet network connection
(10/100Mb/s)
Memory
128-MB DDR with ECC
Operating System
Support
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit
and 64 bit)
Microsoft Windows Server 2008
Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008
Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003
and Windows Server 2003 R2, and Windows Server 2003 for Extended Systems
Standard Edition, Enterprise Edition
Red Hat Enterprise Linux 5.4 (32
bit and 64 bit)
SUSE Linux Enterprise Server 11
(32bit and 64bit)
SUSE Linux Enterprise Server 10
(32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Client System Support
Microsoft Windows 7
Microsoft Windows XP Professional
Edition
Microsoft Windows Vista Business
and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop
11
SUSE Linux Enterprise Desktop
10
Client Browser Support
Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows
and Linux systems)
Firefox 3.0 (on supported Windows
and Linux systems)
Command Line Support
Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2
Security
Advanced Encryption Standard (AES)
and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting
interface
AES encryption of video
RC4 encryption of video
Directory Support Services
Active Directory v1.0 (Windows
2003)
Driver Support
HP ProLiant iLO3 Management Controller
Driver Package
Management protocols supported
SNMP, IPMI 2.0 (system and LAN
interface), DMTF Systems Management Architecture for Server Hardware Command
Line Protocol (SMASH CLP), HP RIBCL XML
Smart Array P410i Controller
Dimensions
Embedded
Disk Drive and Enclosure Interface
- Transfer rate
6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)
SAS Connectors
2 internal 4X connectors
Cache Memory Speed
DDR2-800MHz with 40 or 72-bit
wide bus
Server Interface
x4 PCIe 2.0 provides 2GB/s maximum
bandwidth
SAS Speed
8 6Gb/s SAS links provide 4.8GB/s
maximum bandwidth
Cache Memory
Zero Memory RAID has no cache
memory
40-bit 256MB ECC protected cache (battery upgrade available)
72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC
Logical Drives Supported
Zero Memory, Up to 2 logical volumes
(8 physical drives)
Up to 64 logical drives with cache
Host Memory Addressing
64-bit, supporting greater than
4GB server memory space
RAID Support
RAID 6, 6+0 (Advanced Data Guarding) NOTE: RAID 6, 6+0 can be enabled
with one of the following combinations:
RAID 5, 5+0 (Distributed Data
Guarding) NOTE: A minimum or 256 MB cache is
required to enable RAID 5, 5+0 support
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
Two HP NC382i Dual Port
Multifunction Gigabit Server Adapters
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
PCI Express, four lanes
(x4)
Controller
Broadcom5709C
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
Two RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m)
100Base-TX
Category 5 or higher UTP;
up to 328 ft (100 m)
1000BaseTX
Category 5 or higher UTP;
up to 328 ft (100 m)
Environment-friendly Products and
Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
US Site
DL Quickspecs
Search:
585322-B21
© 2012 Canada PartsDirect