As the leading 2P 2U AMD rack server,
the HP ProLiant DL385 G6 is designed with virtualization in mind, yet
flexible to support any business need in many environments from corporate
datacenters to sophisticated SMBs.
Front View:
Rear View:
1.
Quick removal access panel
1.
PCI slot 5
2.
AMD Six-Core Processor
(Performance models include two processors)
2.
PCI slot 6
3.
PCI slot 4
3.
Second AMD Six-Core Processor
4.
PCI slot 2
4.
Sixteen sockets
for PC2-6400 DIMMs (800MHz) with Advanced ECC
5.
PCI slot 3
6.
PCI slot 1
5.
Hot-plug fans, full redundancy
7.
Power supply 2
6.
Slim SATA DVD-RW
Optical Drive included on Performance models
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
NOTE:
Processor wattage references reflect Average CPU Power (ACP). For more information
on ACP visit: http://www.amd.com/powernow.
NOTE: Up to
2 processors supported. High Performance Model configurations include two
processors, 16 GB system memory, 512MB storage controller memory, BBWC,
DVDRW, Redundant 750W Power Supplies, and 6 hot plug redundant fans. NOTE: AMD Six-Core, 2400 series processors with 6MB Level 3 cache
for blazing performance; systems support up to 2 processors (2 processors
standard on all Performance models).
Cache
Memory
6MB (1 x 6MB) Level 3 cache
memory
Chipset
Serverworks HT-2100 Northbridge
and HT-1000 Southbridge Chipset
Upgradeability
Upgradeable
to two processors
Memory Protection
Advanced ECC
Memory One
of the following depending on Model
Type
REG PC2-6400 DIMMs (DDR2-800) Standard models support 2:1 Bank Interleaving,
with 4:1 Bank Interleaving (Data saved across 2 pairs of DIMMs) and Node interleaving
support (data saved across 2 processors memory sets) available. NOTE:
If only one processor is installed, only half of the DIMM slots are available.
Standard (Entry Models)
4
GB (2 x 2 GB)
Standard
(Base Models)
8 GB (2 x
4 GB)
Standard
(Performance Models)
16 GB (4
x 4 GB)
Maximum
128
GB (16 x 8 GB) (PC2-5300)
Network Controller
Two HP NC382i Dual Port Multifunction
Gigabit Server Adapters (four ports total) NOTE: 1GB of memory is sufficient
to support up to eight Total Ports. 2GB of memory is required if nine or
more Total Ports have been selected.
Expansion Slots NOTE: Up to 6 PCI slots (one occupied
by controller). Standard BTO riser with PCIe (1) x8 FL/FH, (2) x4 HL/FH.
Optional second risers with PCIe (1) x8, (2) x4; or a PCIe/PCI-X mixed riser
with (1) PCI-X, (1) x8, (1) x4; or a x16 225w PCIe riser with (1) x16; or
a PCIe riser with (2) x8.
Primary Riser
(Standard)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCI-Express
x8
x16
42
Full Length/Full
Height
2
PCI-Express
x4
x8
45
Half Length, Full
Height
3
PCI-Express
x4
x8
48
Half Length, Full
Height
Occupied by P410
controller
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with
PCI bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector
PCIe Riser
(Optional Secondary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
4
PCI-Express
x8
x16
4
Full Length/Full
Height
5
PCI-Express
x4
x8
7
Low Profile
6
PCI-Express
x4
x8
A
Low Profile
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the
PCIe/PCI-X Riser
(Optional Primary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCI-Express
64-bit
N/A
49
Full Length, Half
Height
2
PCI-Express
x8
x16
42
Half Length, Full
Height
3
PCI-Express
x4
x8
45
Half Length, Full
Height
NOTE: Bus number - Default
bus assignment (in decimal). Inserting cards with PCI bridges may alter
the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: PCI-X support is limited to PCI-X cards only
PCIe/PCI-X
(Optional Secondary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
4
PCI-X
64-bit
N/A
B
Full Length/Full
Height
5
PCI-Express
x8
x16
4
Low Profile
6
PCI-Express
x4
x8
7
Low Profile
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with PCI
bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: PCI-X support is limited to PCI-X cards only
x16 PCIe Riser
(Optional Primary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCI-Express
x16
x16
42
Full Length/Full
Height
Supports up to
225W; single wide cards only
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with
PCI bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector
(2) x8 PCIe
Riser
(Optional Primary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
1
PCI-Express
x8
x16
45
Full Length/Full
Height
2
PCI-Express
x8
x16
42
Half Length, Full
Height
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with
PCI bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported NOTE: The shared network port is only supported in the secondary
riser connector
(2) x8 PCIe
Riser
(Optional Secondary)
Expansion Slots
#
Technology
Bus
Width
Connector Width
Bus Number
Form Factor
Notes
4
PCI-Express
x8
x16
7
Full Length/Full
Height
5
PCI-Express
x8
x16
4
Low Profile
NOTE:
Bus number - Default bus assignment (in decimal). Inserting cards with
PCI bridges may alter the actual bus assignment number NOTE: Bus width - Indicates the number of physical electrical lanes
running to the connector NOTE: Only single wide cards are supported NOTE: The shared network port is only supported in the secondary
riser connector
Storage Controller One of the following depending on Model
Entry Models:
HP Smart Array P410/Zero Memory
Controller
Base Models:
HP Smart Array P410/256 MB Controller
High Performance Models:
HP Smart Array P410/512 MB BBWC
Controller
Available upgrades:
256MB, 512MB with BBWC, 512MB with FBWC, 1G with FBWC, Battery kit upgrade
(for the 256MB cache), and Smart Array Advanced Pack (SAAP) NOTE: RAID 6 requires purchase of
HP Smart Array Advanced Pack (516471-B21).
Internal Storage
Devices
Diskette
Drive
None
Optical Drive One of the following depending on Model
None
HP Slim SATA DVD RW Optical
Drive (standard on Performance Models)
ACPI 2.0 Compliant
PCIe 1.1 Compliant
PCI 2.2 Compliant
PCI-X 2.0a Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Server Power Cords
NOTE: If customers require a local power
cord, they can check the power cord matrix for the appropriate county
specific sku. Please see the following power cord matrix for details:
http://www.hp.com/go/powercordmatrix
Common Slot ProLiant
HP has a new design for ProLiant power - the new Common Slot (CS) Power
Supply bay. This design provides the customer with commonality in power
supplies across multiple platforms to save on the cost of spares and allows
HP to offer multiple power solutions to fit the customers' needs. Many
HP ProLiant Servers come with high efficiency CS power supplies that are
designed to provide the highest power efficiency without degrading performance
of the server. HP CS Power Supplies have efficiency ratings up to 92%.
There are several power output options to choose from allowing you to
"Right Size" a power supply that is appropriate for your server
configuration. To make sure you select the correct power supply to meet
your configuration, we suggest that you use the HP Power Advisor at: www.hp.com/go/hppoweradvisor,
to decide the "Right-Size" for your configuration. All HP Common
Slot power sources are UL, CE Mark Compliant, Hot Plug and Redundant.
It is highly recommended that you use the HP Power Calculator in defining
the "Right-Size" power supply for your needs.
HP's ProLiant Common Slot Power supplies (460W & 750W) meet multiple
Energy Efficiency Initiatives. Climate Savers Computing Initiative GOLD,
ECOS Consulting 80PLUS GOLD and plans on offering models that meet the
Energy Star for Server requirements when they are published.
HP's ProLiant Common Slot Power supplies (1200W) meet multiple Energy
Efficiency Initiatives. Climate Savers Computing Initiative Bronze, ECOS
Consulting 80PLUS Bronze Power Supply requirements.
Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can
be purchased through power supply option kits (see Redundant Options for
part numbers).
NOTE: BTO Performance models include
two power supplies; BTO Base and Entry models include one power supply.
On CTO models, power supply must be selected from available options.
System Fans
Hot plug fans ship standard,
N+1 fully redundant
(3+1) for 1 processor, (5+1) for 2 processors NOTE: Processor option kits include
2 additional fans when upgrading to 2 processors.
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for
OS and Virtualization Software and latest listing of software drivers available
for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport
and our driver download page www.hp.com/support/DL385G6
Graphics
Integrated ATI ES1000, 32MB video standard
16 bit color: maximum resolution of 1600 x 1200
32 bit color: maximum resolution of 1280 x 1024
NOTE: Maximum resolution available via
iLO remote console is 1280 x 1024.
Form Factor
Rack (2U), (3.5-inch)
HP Insight management software
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecyle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: http://www.hp.com/go/foundation.
The foundation pack includes:
NOTE: In an effort to support
reducing our environmental impact, the HP Insight Foundation Suite for
ProLiant media will be available as a selectable option for this server
at time of order of a CTO SKU. This will allow customers to order the
number of media kits that best meet their needs and eliminate receiving
unnecessary duplicate media.
HP Integrated Lights-Out
(iLO) integrated on system board
HP Integrated Lights-Out
(iLO) simplifies server setup, health monitoring, power and thermal control,
and lights-out remote administration of ProLiant ML, DL, and BL servers.
HP iLO functions without additional software and can be accessed from any
location via a web browser. HP iLO works hand-in-hand with HP Systems Insight
Manager, Insight Control, and Insight Dynamics for ProLiant, helping customers
unleash the value of the ProLiant platform and deliver the highest possible
quality of IT service. For more information, visit: www.hp.com/go/iLO
Intelligent
Manageability
HP Systems Insight
Manager software SmartStart Management Agent Redundant ROM Remote
Flash ROM ROM-Based Setup Utility (RBSU) Integrated Management Log Automatic
Server Recovery (ASR) Dynamic Sector Repairing (with Smart Array controller) Drive
Parameter Tracking (with Smart Array controller) Pre-Failure Warranty (covers
processors, SAS hard drives and memory)
Security
Power-on
password Keyboard password Diskette drive control Diskette boot control
QuickLock, Network Server Mode Parallel and serial interface control Administrator's
password
Warranty
This product is covered by a
global limited warranty and supported by HP Services and a worldwide network
of HP Authorized Channel Partners resellers. Hardware diagnostic support
and repair is available for three years from date of purchase. Support for
software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services
or customized service agreements. Hard drives have either a one year or
three year warranty; refer to the specific hard drive QuickSpecs for details. NOTE: Server Warranty includes 3-Year
Parts, 3-Year Labor, 3-Year Onsite support with next business day response.
Warranty repairs may be accomplished through the use of Customer Self Repair
(CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts
are designed for easy replacement. A travel and labor charge will result
when customers decline to replace a Mandatory CSR part; 2) Optional CSR
parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical
support is available at:http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to deploy,
migrate, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central management server:
HP Insight Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics
for ProLiant
HP Insight Dynamics for ProLiant, a product option, is an integrated
command center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. As a powerfully
integrated by design toolkit to accelerate complex technology projects
and simplify daily operations that ultimately enable IT Staff personnel
to dynamically keep pace with the organizations changing business requirements.
It enables them to plan capacity and power continuously, balance across
physical and virtual resources, and ensure cost-effective high availability.
It also enables IT organizations to provision infrastructure consistently
and automatically from pools of shared resources using a self-service
portal. Resources provisioned can range from a single virtual machine
to complex multi-tier environments and their associated physical and virtual
resource requirements. In addition to the previous functional benefits,
it also provides a cost-effective disaster recovery for physical and virtual
environments that works with HP StorageWorks Continuous Access software
for both the Enterprise Virtual Array and the XP storage array allowing
application environments to be reactivated in minutes with the touch of
a button to a remote location.
NOTE:
High Performance Computing (HPC) interconnect technologies are available
for this server under the Cluster Platform product portfolio. These high-speed
interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with
the help of configuration tools. Please visit the following URL to configure
HPC Clusters with InfiniBand or Gigabit Ethernet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html
InfiniBand
PCI-Express adapters
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure-Enterprise Configurator
now provides factory default racking for our HP hardware portfolio. This
approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration,
please contact HP's Customer Business Center or an Authorized Partner for
assistance. http://www.hp.com/products/configurator.
HP Care Pack Services: Packaged server and storage services for increased
uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a
good time to think about what levels of support you may need. Our portfolio
of service options reduce deployment and management worries while helping
you get the most out of your server and storage investments. We take a
holistic approach to your environment, bridging servers, blades, storage,
software and network infrastructures with our packaged HP Care Pack Services
for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment
warranties have matured along with technology. Good news that can also
create problems stemming from depending on standard warranties designed
to only protect against product defects and some downtime causes. Using
a standard approach to warranty uplifts, such as HP Care Pack Services,
helps reduce downtime risks and provides operational consistency for mission-critical
and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and
storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software
support services suite sold separately, or combined with our Support Plus
and Support Plus 24 services. The portfolio also provides a combination
of integrated proactive and reactive services, such as Proactive 24 Service
and Critical Service. In addition with HP Proactive Select, you can acquire
the specific proactive constancy and technical services. HP Proactive
Select menu offers a broad set of service options that you can mix and
match depending on your specific requirements. Proactive service options
include offers for server, storage, network, SAN device, software, environment
and education services.
HP server and storage lifecycle support services offers a full spectrum
of customer care-from technology support to complex migrations to complete
managed services. HP Factory Express provides customization, integration
and deployment services for turnkey solutions. HP Education Services offer
flexible, comprehensive training on to help your IT staff get the most
out of your server and storage investments. HP Financial solutions extend
innovative financing and cost-effective asset management programs-from
purchase to equipment retirement.
Recommended HP
Care Pack Services for optimal satisfaction with your HP product
Recommended Services
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6-
or 24-hour
Provides your IT manager with a team of support specialists who will quickly
begin troubleshooting the system to help return the hardware to operating
condition within 6 or 24 hours of the initial service request to the HP
Global Solution Center.
HP is committed to repairing your hardware within a maximum of six or
twenty four hours. The benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology
systems
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
Provides you with rapid remote support and if required an HP authorized
representative who will arrive on site any time and day of the year to
begin hardware maintenance service within 4 hours of the service request
being logged.
This service provides a trained HP service specialist to perform an installation
that meets HP quality standards, for:
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner.
Expedited installation, with all service prerequisites met before
the installation is performed
Installation in accordance with manufacturer's specifications, enhancing
the supportability of your HP-installed hardware and software
Service delivery at a mutually scheduled time
Allows your IT resources to stay focused on their core tasks and priorities
Availability of an HP service specialist to answer questions during
the onsite delivery of this service
Optional HP Care
Pack Services that will enhance your HP product experience
Optional Services
3-Year HP Support Plus 24
As an alternative to our recommended support level, for customers who
need access to responsive 24x7 hardware and software support plus software
updates on HP and selected third party products:
For a higher return on your server and storage technology, our 3-year
combined reactive support service delivers integrated onsite hardware/software
support services available 24x7x365, including access to HP technical
resources, 4-hour response onsite hardware support and software updates.
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who
want enhanced operational effectiveness and proactive problem identification:
Provides improved stability, availability and operational effectiveness
with an integrated hardware and software support service that combines
industry-leading reactive technical assistance with proactive account
services, giving your IT manage support from a team of service specialists.
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services
and education courses
Provides a flexible way to purchase HP best-in-class consultancy and
technical services. You can buy Proactive Select Service Credits when
you purchase your hardware and then use the credits over the next 12 months.
HP eSupport is a portfolio of technology-based services that assist you
with managing your business environment - from the desktop to the data
center.
Support Portal
The HP support portal provides one-stop access to the information, tools
and services you need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service
agreement. To access the support portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for
your HP Servers and Storage, 24 X 7, so you can spend less time solving
problems and more time focused on your business. You can have your systems
remotely monitored for hardware failure using secure technology that's
been proven at thousands of companies around the world. In many cases,
you can avoid problems before they occur.
Customer Technical Training
In today's cost-conscious business environment, IT professionals, developers,
consultants and users face an interesting challenge: how to keep up with
the latest technologies and expand important skills while delivering profitable
results on current projects. To help address this challenge, HP offers
innovative training solutions that help keep you up-to-date on virtualization,
server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related
topics-while spending less time away from business-critical activities.
HP Services Awards
HP Technology Services continues to be recognized for service and support
excellence by customers, partners, industry organizations and publications
around the world. Recent honors and award reflect our services team's
dedications, technical expertise, professionalism and uncompromising commitment
to customer satisfaction.
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section. NOTE: Pre-configured models ship with the configurations below. Options
can be selected from the Core or Additional options section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured
models. Any additional options purchased will be shipped separately. NOTE: If you desire a custom configuration please see "Configuration
Information - Factory Integrated Models" section of this QuickSpecs.
NOTE: Not all models are available in all regions. Check with your
local country HP offices for availability.
Performance Models NOTE: Preconfigured
Performance models save valuable deployment time at a discounted bundle
price.
HP ProLiant
DL385 G6 2435 2.6GHz Six Core Performance Rack Server
570102-xx1
Processor(s)
(2) Six-Core AMD Opteron™ Processor
Model 2435 (2.6 GHz, 75W)
Cache Memory
6MB (1 x 6MB) L3 cache
Memory
16GB (4 x 4GB) of 2:1 interleaved
PC2-6400 DIMMs (DDR2-800MHz) with Advanced ECC capabilities
Network Controller
Two HP NC382i Dual Port Multifunction
Gigabit Server Adapters (four ports total)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on configurable product offerings
and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis. NOTE: FIO indicates that this option is only available as a factory
installable option.
Step
1: Base Configuration (choose one of the following configurable models)
HP
Models
HP
ProLiant DL385G6 Rack CTO Chassis
572431-B21
Factory
Integrated Model ships with:
(8) SFF Serial Attached
SCSI (SAS) Drive Bays Two HP NC382i Dual Port Multifunction Gigabit Server
Adapters (four ports total) PCI-Express Riser Cage One IEC Power cord
Hot plug fans (fully redundant) NOTE:
4 fans one processor models; 6 fans two processor models Rack (2U),
(3.5-inch) NOTE: this option removes
the optical media bay and 8 SFF drive bays
HP ProLiant DL385G6
Rack LFF CTO Chassis
573104-B21
Factory Integrated
Model ships with:
(6) LFF Serial Attached
SCSI (SAS) Drive Bays NOTE: LFF configuration
does not support internal optical drive Two HP NC382i Dual Port Multifunction
Gigabit Server Adapters (four ports total) PCI-Express Riser Cage One
IEC Power cord Hot plug fans (fully redundant) NOTE:
(4 fans one processor models; 6 fans two processor models) Rack (2U),
(3.5-inch)
Step 1A: Choose Storage Controller (must choose only
one of the following)
HP
Storage Controllers
NOTE:
RAID 6 requires purchase of HP Smart Array Advanced Pack (516471-B21). NOTE: All storage controllers listed are PCI Express.
HP Smart Array P800/512
BBWC 2-ports Int/2-ports Ext PCIe x8 SAS Controller
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP
Processors
NOTE:
If two processors are desired, select one xxxxxx-B21 and one xxxxxx-B21.
If selecting 570113-B21 and high performance features are desired, select
High Performance Pack in Step 3 below.
Six-Core Processors
HP DL385 G6 AMD Opteron™
2435 (2.60GHz/6-core/6MB/75W) FIO Processor Kit
570113-B21
HP DL385 G6 AMD Opteron™
2431 (2.40GHz/6-core/6MB/75W) FIO Processor Kit
570115-B21
HP DL385 G6 AMD Opteron™
2427 (2.20GHz/6-core/6MB/75W) FIO Processor Kit
570117-B21
HP DL385 G6 AMD Opteron™
2425HE (2.10GHz/6-core/6MB/55W) FIO Processor Kit
570119-B21
HP
Memory
NOTE:
DIMM banks are active only when the corresponding processor socket is populated.
HP 2GB (2x1GB) Single
Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 64GB (8x8GB) Dual
Rank PC2-5300 (DDR2-667) Registered Memory Kit NOTE: P/N: 495605-B21 includes 8
DIMMs instead of 2. It is counted as 4 kits instead of 1.
NOTE:
Prior to making a power supply selection it is highly recommended that the
HP Power Advisor is run to determine the right size power supply for your
server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP Smart Array Advanced
Pack including 1yr 24x7 Technical Support and Updates Single Server License NOTE: This part number can be used
to purchase a single license or to order multiple licenses with a single
activation key. Customers will receive a license entitlement certificate
via e-mail. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Include one
year of 24x7 HP Software Technical Support Services. NOTE: RAID 6 requires purchase of HP Smart Array Advanced Pack (516471-B21).
The HP ProLiant DL385
G6 performance packs are necessary to configure a HP ProLiant DL385 G6 Performance
Model. HP ProLiant DL385 G6 Performance model includes the latest performance
technologies and enterprise class availability features pre-installed for
convenience and value. The performance pack includes a 2nd processor, two
additional fans, HP Smart Array P410/512MB with BBWC, and a second 750W
CS HE power supply. To complete the configuration of a Performance model,
select the Slim SATA DVD-RW Optical Drive Kit (481043-B21).
HP DL385G6 O2435
HPM FIO PERF PACK
570121-B21
HP
Insight Software
HP Insight Control,
No Media 1-Server License Factory-Integratable Option (FIO) including 1
year of 24x7 Technical Support and Updates
582765-B21
HP Insight Control
for Linux, No Media 1-Server License Factory-Integratable Option (FIO) including
1 year of 24x7 Technical Support and Updates
TC203A
Step 4: Choose
Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" and
"Additional Options" section below.
NOTE:
Some options may not be available for factory integration. Please contact
an HP sales representative for additional information.
HP
Unique Options
HP StorageWorks RDX160
Removable Disk Backup System DL Server Module NOTE: Mounts in DL385 G6 second drive
cage slot (160GB of Disk Storage)
AP724A
HP StorageWorks RDX320
Removable Disk Backup System DL Server Module NOTE: Mounts in DL385 G6 second drive
cage slot (320GB of Disk Storage)
AP725A
HP StorageWorks RDX500
Removable Disk Backup System DL Server Module NOTE: Mounts in DL385 G6 second drive
cage slot (500GB of Disk Storage)
AP726A
HP StorageWorks RDX
1TB Removable Disk Backup System DL Server Module NOTE: Mounts in DL385 G6 second drive
cage slot (1 TB of Disk Storage)
BV848A
HP 8SFF CAGE 385
G6 NOTE: Second drive cage installation
replaces internal optical bay. NOTE: Second drive cage requires second controller or HP SAS Expander
Card ( 468406-B21).
516914-B21
HP Processors
Six-Core Processors
HP DL385 G6 AMD Opteron™
2435 (2.60GHz/6-core/6MB/75W) Processor Kit
570113-B21
HP DL385 G6 AMD Opteron™
2431 (2.40GHz/6-core/6MB/75W) Processor Kit
570115-B21
HP DL385 G6 AMD Opteron™
2427 (2.20GHz/6-core/6MB/75W) Processor Kit
570117-B21
HP DL385 G6 AMD Opteron™
2425HE (2.10GHz/6-core/6MB/55W) Processor Kit
570119-B21
NOTE: Second
processor kits include additional two fans.
HP Memory
HP 2GB (2x1GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit
HP Slim SATA DVD-RW Optical Drive NOTE: Included in performance models.
481043-B21
HP External USB CD/DVD R/RW Optical
Drive
FS943AA#ABA
HP Hard Drives
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives
HP 600GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive
10 Gigabit Ethernet adapters NOTE: No more than two 10GbE I/O
devices are supported in a single ProLiant server. NOTE: A minimum of two Gigabytes (2 GB) of server memory is required
per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
HP DL38X (2) x8 PCI-E Riser Kit NOTE: This riser card will support
Qty 2 of 10Gbe NICs.
494326-B21
HP Power Supplies
NOTE: Prior to
making a power supply selection it is highly recommended that the HP Power
Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information.
HP
Insight Software
HP Insight Control
HP Insight Control, Single-Server License
including 1 year of 24x7 Technical Support and Updates
452148-B22
HP Insight Control suite, No Media, Electronic
License including 1 year of 24x7 Technical Support and Updates
T9074BAE
HP Insight Control, Electronic License for
bundling with ProLiant ML/DL server, including 1 year of 24x7 Technical
Support and Updates
TC278AAE
HP Insight Control, Tracking License for
bundling with ProLiant ML/DL server, including 1 year of 24x7 Technical
Support and Updates
TC275A
HP Insight Software Media Kit NOTE: Insight Software DVD media
without licenses. Contains HP Systems Insight Manager, HP Insight Control,
HP Insight Dynamics, HP Insight Control for Microsoft System Center, and
Virtual Connect Enterprise Manager software. Uses an integrated installer
to perform quick and accurate software installation and updates.
436222-B21
NOTE: Electronic and Flexible-Quantity
licenses can be used to purchase multiple licenses with a single activation
key. NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates. NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control for Linux
HP Insight Control for Linux, 1-server license, including one year of
24x7 Technical Support and Updates, Electronic
TC213AAE
HP Insight Control for Linux, No Media, 1-Server
license, including one year of 24x7 Technical Support and Updates
TC209A
HP Insight Control for Linux, Media pack
(DVD) - No licenses included NOTE: Media pack DVD contains the
ISO image for HP Insight Control for Linux, HP Systems Insight Manager,
HP Insight Control power management, HP Insight Control virtual machine
management, and an integrated installer. Servers must be acquired separately.
TC208A
NOTE: Licenses ship without
media. The Media Kit for Insight Control for Linux can be ordered separately,
or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button). NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single set of activation keys. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Integrated Lights-Out (iLO) Advanced
HP Integrated Lights-Out Advanced, No Media,
1-Server License, including 1 year of 24x7 Technical Support and Updates
512485-B21
HP ProLiant Essentials Integrated Lights-Out
Advanced Pack, Electronic, including 1 year of 24x7 Technical Support and
Updates
TA850AAE
NOTE: This license allows
1 server to be deployed and managed via HP iLO Advanced. Customer will receive
a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service. NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: For additional license kits, including electronic delivery
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
HP Insight Control Server Deployment
HP Insight Control server deployment, Electronic
License including 1 year of 24x7 Technical Support and Updates
T9082AAE
HP Insight Control server deployment, Single-Server
License including 1 year of 24x7 Technical Support and Updates
452151-B21
NOTE: Electronic and Flexible-Quantity
licenses can be used to purchase multiple licenses with a single activation
key. NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Drive Cage Options
HP 8SFF CAGE 380G6
516914-B21
HP I/O Accelerator Options
HP 160GB SLC PCIe ioDrive NOTE: A low-profile PCI bracket is
included for use in low-profile slots.
600278-B21
HP 320GB MLC PCIe ioDrive NOTE: A low-profile PCI bracket is
included for use in low-profile slots.
NOTE:
The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These
artifacts can include passwords, certificates and encryption keys. Windows®
BitLocker™ Drive Encryption (BitLocker) is a data protection feature
available in Windows Server® 2008. BitLocker leverages the enhanced
security capabilities of a Trusted Platform Module (TPM) version 1.2. The
TPM works with BitLocker to help protect user data and to ensure that a
server running Windows Server 2008 has not been tampered with while the
system was offline. For more information about TPM, including a white paper,
go to: www.hp.com/go/TPM. NOTE: ProLiant OS pre-installed units will come with the partition
required for TPM deployment. NOTE: The TPM key is unique to every TPM deployed server and must
be retained. Misplacing or loosing the key could result in data loss.
HP Storage Controllers
SAS Controllers
Smart Array P800 Controller
HP Smart Array P800/512 BBWC 2-ports
Int/2-ports Ext PCIe x8 SAS Controller
HP 650 mAh P-Series Battery NOTE: To enable BBWC on the 256MB
cache. NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array
P410 Controller, and HP Smart Array P411 Controller only.
462969-B21
HP 8484 to Mini SAS 33in Cable
Assembly NOTE: Cable for use connecting the
Smart Array P800 Controller to internal hard disk drives on select HP ProLiant
G6 Servers.
HP Smart Array Advanced Pack including
1yr 24x7 Technical Support and Updates Single Server License NOTE: This part number can be used
to purchase a single license or to order multiple licenses with a single
activation key. Customers will receive a license entitlement certificate
via e-mail. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Include one
year of 24x7 HP Software Technical Support Services.
HP Modular Smart Array SC08e 2-ports
Ext PCIe x8 SAS Host Bus Adapter NOTE: This is a 2 x4 External Port
HBA NOTE: This is only approved for the HP StorageWorks P2000 G3 SAS
Modular Smart Array.
NOTE: For the
complete range of StorageWorks tape drives, autoloaders, libraries and media
see: http://www.hp.com/go/tape.
For hardware and software compatibility of HP StorageWorks tape backup products
see: http://www.hp.com/go/connect.
HP DAT 320 USB 1U Rack-mount Kit
AP835B
HP StorageWorks 1/8 G2 LTO-4 Ultrium
1760 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack Kit (AH166A) for rack installation. Connection using HP SC44Ge SAS
Host Bus Adapter ( 416096-B21) recommended.
AK377A
HP StorageWorks LTO-4 Ultrium
1760 Tape Drive in 1U SAS Rack Kit NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
EH946B
HP StorageWorks LTO-5 Ultrium
3000 Tape Drive in 1U SAS Rack Kit NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
EJ014A
HP StorageWorks 1/8 G2 LTO-3 Ultrium
3000 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader
Rack Kit (AH166A) for rack installation. Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
BL536A
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1760 SAS Drive Library
AK378A
HP StorageWorks MSL2024 Tape Library
with one LTO-5 Ultrium 3000 SAS Drive NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
BL537A
HP StorageWorks MSL4048 1 LTO-4
Ultrium 1760 SAS Drive Library
AK380A
HP StorageWorks MSL4048 Tape Library
with one LTO-4 Ultrium 3000 SAS Drive NOTE: Connection using HP Smart Array
P212/Zero Memory Controller ( 462828-B21) recommended.
HP StorageWorks D2D Backup Systems
with Backup Data Deduplication
HP StorageWorks D2D2502i Backup
System NOTE: 1.5TB of useable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ001B
HP StorageWorks D2D2504i Backup
System NOTE: 3.0TB of useable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended.
EJ002B
HP StorageWorks D2D4112fc Backup
System NOTE: 9.0TB (expandable to 18.0TB)
of useable network disk backup capacity. Fibre Channel SAN connected appliance.
Direct server attach is not supported, requires connection via SAN fabric.
EH993B
HP StorageWorks RDX Removable
Disk Backup Systems USB
HP StorageWorks RDX160 Removable
Disk Backup System DL Server Module NOTE: Mounts in DL385 G6 second drive
cage slot (160GB of Disk Storage)
AP724A
HP StorageWorks RDX320 Internal
Removable Disk Backup System for DL Servers NOTE: 320GB of disk capacity per
data cartridge.
AP725A
HP StorageWorks RDX500 Internal
Removable Disk Backup System for DL Servers NOTE: 500GB of disk capacity per
data cartridge.
AP726A
HP StorageWorks RDX750 Internal
Removable Disk Backup System for DL Servers NOTE: 750GB of disk capacity per
data cartridge.
AW578A
HP StorageWorks RDX 1TB Internal
Removable Disk Backup System DL Servers NOTE: 1 TB of disk capacity per data
cartridge.
NOTE: For additional
information on HP Uninterruptible Power Systems please go to: www.hp.com/servers/rackups. NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
HP R/T3000 Uninterruptible Power
System (UPS)
HP R/T3000 UPS, High voltage,
NA/JPN
AF453A
HP R/T3000 UPS, High voltage,
detachable inlet cord INTL
NOTE: For additional
information on HP Uninterruptible Power Systems please go to: www.hp.com/servers/rackups. NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com. NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord
Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
HP Power Distribution Units
HP Monitored Power Distribution
Unit: Half Rack Version
HP 4.9 kVA S124 Monitored PDU-
single input, 1Ø, 24A (NA/JPN)
AF914A
HP 7.3 kVA S132 Monitored PDU-
single input, 1Ø, 32A (INTL)
Modular Power Distribution Units
1U/0U (Up to 32 outlets) NOTE: 1U/0U mounting brackets shipped
with the unit (optimized for 10000 and 9000 series racks).
HP Modular Power Distribution
Units (mPDU), High Volt Model, 24A (200-240 VAC) (NA, Japan)
8.3kVA Model - mPDU, 40A, High
(power cord attached) (NA/JPN)
252663-D73
HP Modular Power Distribution
Units (mPDU), High Volt Model, 32A (200-240 VAC) (Int'l)
252663-B31
HP Modular Power Distribution
Units (mPDU), High Volt Model, 16A (200-240 VAC) (WW) NOTE: This PDU has a detachable input
power cord and allows for adaptability to country specific power requirements.
NOTE: Please see
the following QuickSpecs for additional options including shorter jumper
cables and country specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html
(Worldwide) NOTE: For additional information on HP Power Distribution Units including
accessories please go to: www.hp.com/go/pdu. NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord
Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
HP Rack Series
HP Rack 10000 G2 Series
(Carbon/Graphite Metallic)
HP 2GB USB Flash Media Drive
Key NOTE: HP qualified blank USB key
for use with HP ProLiant servers that support the VMware virtualization
environment and other HP value-add software like SmartStart. HP recommends
this industry standard USB flash device for use with VMware ESXi. USB device
must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP
VMware Getting Started Guide for installation instructions.
608447-B21
HP Care Pack Services
Hardware Services On-site Service
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic
U4544E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic
U4545E
Hardware Services 6-Hour Call
to Repair On-site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
U4546E
Installation & Start-up Services
Hardware Installation, Electronic
U4554E
Installation & Start-Up of
a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.
HP holidays, Electronic
U4555E
Installation and Startup for Essentials
Rapid Deployment Pack, Electronic
U5683E
Support Plus
Onsite HW support, 8am-9pm, M-F,
4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion,
8am-9pm, M-F 2hr response time excl. HP holidays, Electronic
U4556E
Support Plus 24
Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U4557E
Onsite HW support 24x7, 4hr response
and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL385 G6
Standard Memory (Base Models)
8 GB REG PC2-6400 2 x 4 GB installed (Base Model)
Upgrading Memory and Memory Interleaving
DIMMs must be installed in identical pairs. Bank interleaving is automatically
enabled on a processor node under the following conditions:
Four single ranked DIMMs populated per node
(4 x 1 GB or 4 x 2 GB for example) yields 2-way bank interleaving.
Two dual ranked DIMMs populated per node (2
x 4 GB or 2 x 8 GB for example) yields 2-way bank interleaving.
Four dual ranked DIMMs populated per node (4
x 4 GB or 4 x 8 GB for example) yields 4-way bank interleaving.
If single and dual ranked DIMMs are mixed on the same node, bank interleaving
will not be enabled.
If single and dual ranked DIMMs are mixed on the same node, bank interleaving
will not be enabled.
Node interleaving can
be configured via RBSU if both processors have the same memory footprint
and it is independent of bank interleaving.
DIMMs must be installed in decreasing capacity with the largest DIMMs
installed in the banks furthest away from each processor.
Standard Memory Plus Optional Memory
Up to 56 GB memory is available with the standard memory and the optional
installation of 6 x 8GB PC2-5300 DIMMs.
Standard Memory Replaced with Optional Memory
Up to 64 GB of memory is available with the removal of the standard memory
and the optional installation of 8 x 8 GB PC2-5300 DIMMs.
NOTE: Chart does not represent all possible configurations.
NOTE: DIMM banks are active only when the corresponding processor
socket is populated.
Slot
Bank
A
Bank
B
Bank
C
Bank
D
Bank
E
Bank
F
Bank
G
Bank
H
Config
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Total
Standard
4GB
4GB
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
8GB
Optional
8GB
8GB
8GB
8GB
8GB
8GB
4GB
4GB
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
56GB
Maximum
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
64GB
HP
ProLiant DL385 G6 Performance Models
Standard Memory 16 GB
REG PC2-6400 4 x 4 GB installed Upgrading Memory
and Memory Interleaving DIMMs must be installed in identical pairs.
Bank interleaving is automatically enabled on a processor node under the following
conditions:
Four single ranked DIMMs populated per
node (4 x 1 GB or 4 x 2 GB for example) yields 2-way bank interleaving.
Two
dual ranked DIMMs populated per node (2 x 4 GB or 2 x 8 GB for example) yields
2-way bank interleaving.
Four dual ranked DIMMs populated per node
(4 x 4 GB or 4 x 8 GB for example) yields 4-way bank interleaving. If single
and dual ranked DIMMs are mixed on the same node, bank interleaving will not be
enabled.
Node interleaving can be configured via
RBSU if both processors have the same memory footprint and it is independent of
bank interleaving.
DIMMs must be installed in decreasing capacity with
the largest DIMMs installed in the banks furthest away from each processor. Standard Memory Plus Optional Memory Up
to 112 GB memory is available with the standard memory and the optional installation
of 12 x 8GB PC2-5300 DIMMs. Standard Memory Replaced
with Optional Memory Up to 128 GB of memory is available with the removal
of the standard memory and the optional installation of 16 x 8 GB PC2-5300 DIMMs.
NOTE: Chart does not represent all
possible configurations.
Slot
Bank
A
Bank B
Bank C
Bank
D
Bank E
Bank F
Bank
G
Bank H
Config
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Total
Standard
4GB
4GB
Empty
Empty
Empty
Empty
Empty
Empty
4GB
4GB
Empty
Empty
Empty
Empty
Empty
Empty
16GB
Optional
8GB
8GB
8GB
8GB
8GB
8GB
4GB
4GB
8GB
8GB
8GB
8GB
8GB
8GB
4GB
4GB
112GB
Maximum
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
8GB
128GB
Following are memory
options available from HP:
HP Memory
HP 2GB (2x1GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit
NOTE: This configuration
does not support optical drive. NOTE: This configuration requires a second controller or SAS Expander
Card.
1-6
Six LFF SAS hot plug hard drive
bays
NOTE: This configuration
does not support optical drive. NOTE: This configuration replaces SFF hard drive cage.
Drive Support
Quantity
Supported
Position
Supported
Controller
Removable Media
Slim SATA DVD RW Optical Drive NOTE: Included in performance models.
Only 1 available removable media bay
Slimline bay
Integrated SATA
Slim SATA DVD-ROM Optical Drive
Only 1 available removable media bay
Slimline bay
Integrated SATA
Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch)
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
600GB 6G SAS 10K DP
450GB 6G SAS 10K DP
300GB 6G SAS 10K DP
146GB 6G SAS 15K DP
146GB 6G SAS 10K DP 72GB 6G SAS 15K DP
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SAS Hot Plug LFF (3.5-inch)
Enterprise (ENT) Drives
Quantity
Supported
Position
Supported
Controller
600GB 6G SAS 15K DP
450GB 6G SAS 15K DP
300GB 6G SAS 15K DP
Up to 6
1-6
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SAS Hot Plug SFF (2.5-inch)
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
500GB 6G SAS 7.2K DP
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SAS Hot Plug LFF (3.5-inch)
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 6G SAS 7.2K DP
1TB 6G SAS 7.2K DP
Up to 6
1-6
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug SFF (2.5-inch) Midline
(MDL) Drives
Quantity
Supported
Position
Supported
Controller
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug LFF (3.5-inch) Midline
(MDL) Drives
Quantity
Supported
Position
Supported
Controller
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
Up to 6
1-6
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug SFF
(2.5-inch) Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 5.4K
120GB 1.5G SATA 5.4K
Up to 16
1-8
1-16 NOTE: Depending on Model
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug LFF
(3.5-inch) Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 6
1-6
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug Midline
(MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD
Up to 16
1-8
1-16
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
SATA Hot Plug 3.5"
Midline (MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD
Up to 6
1-6
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P410/512 MB FBWC Controller
HP Smart Array P410/1G FBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
60 Modular Smart Array
Up to 4
External
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
Up to 8
External
HP Smart Array P800/512 BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
70 Modular Smart Array
Up to 4
External
HP Smart Array P800/512 BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P411/512 MB FBWC Controller
HP Smart Array P411/1G FBWC Controller
Maximum Storage Capacity - (with MSA70)
Internal
8.0TB
(16x 500GB SAS/SATA)
External
12.5TB
(250 x 500GB SAS/SATA SFF)
Total
20.5TB
Tape and Disk Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media, including the internal fitting models, see: http://www.hp.com/go/tape.
For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk and tape
backup products see: http://www.hp.com/go/connect.
Position
Supported
Controller
Controller Part Number
HP StorageWorks SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter
HP StorageWorks Fibre Channel
Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity
matrix at: http://www.hp.com/go/ebs
for connectivity information and the supported Fibre Channel HBAs shown
in this QuickSpecs.
N/A
HP StorageWorks USB RDX Removable Disk Backup System
RDX160
RDX320
RDX500
RDX750
RDX1TB
Internal or External
USB 2.0 Port
N/A
HP StorageWorks D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If
the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended.
N/A
HP StorageWorks D2D Backup Systems,
Fibre Channel
D2D4000fc
Maximum
(all hard drives, power supply, and processor installed)
60 lb (27.22 kg)
Minimum
(one hard drive, power supply, and processor installed)
47.18 lb (20.41 kg)
Input Requirements
(per power supply)
Rated Line Voltage
100 to 120 VAC
200 to 240 VAC
Rated Input Current
For 1200 W Power Supply:
10 A (at 100 VAC),
4.9 A (at 200 VAC)
For 750 W Power Supply:
8.9 A (at 100 VAC),
4.3 A (at 200 VAC)
For 460 W Power Supply:
5.5 A (at 100 VAC),
2.6 A (at 200 VAC)
Rated Input Frequency
50 to 60 Hz
Rated Input Power
For 1200 W Power Supply:
930 W (at 100 VAC),
1348 W (at 200 VAC)
For 750 W Power Supply:
857 W (at 100 VAC),
824 W (at 200 VAC)
For 460 W Power Supply:
526 W (at 100 VAC),
505 W (at 200 VAC)
BTU Rating
Maximum
For 1200 W Power Supply:
3530 BTU/hr (at 100 VAC),
4600 BTU/hr (at 200 VAC)
For 750 W Power Supply:
2925 BTU/hr (at 100 VAC),
2812 BTU/hr (at 200 VAC)
For 460 W Power Supply:
1794 BTU/hr (at 100 VAC),
1725 BTU/hr (at 200 VAC)
For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
Maximum Peak Power
For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
System Inlet Temperature
Operating
10° to 35°C (50° to
95°F) at sea level with an altitude derating of 1.0°C per every
305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050
m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of
options installed.
System performance may be reduced if operating with a fan fault or above
30°C (86°F).
Non-operating
-30° to 60°C (-22°
to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
Operating
10 to 90% relative humidity (Rh),
28°C (82.4°F) maximum wet bulb temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh),
38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value
may be limited by the type and number of options installed. Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared
A-Weighted sound power levels (LWAd) and declared average bystander position
A-Weighted sound pressure levels (LpAm) when the product is operating in
a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.3 B
LpAm
47 dBA
Operating
LWAd
6.3 B
LpAm
47 dBA
Emissions Classification
(EMC)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC
CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;
EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is
eligible to bear the appropriate compliance logos and statements.
Smart Array P410 Controller
Disk
Drive and Enclosure Interface - Transfer rate
6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)
SAS
Connectors
2 internal (Mini-SAS)
x8 wide port connectors
Cache
Memory Speed
DDR2-800MHz with
40 or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth.
64-bit, supporting
greater than 4GB server memory space
RAID
Support
RAID 6, 6+0 (Advanced
Data Guarding) NOTE: The minimum of
256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade is
required to enable RAID 6, 6+0
RAID 5, 5+0 (Distributed Data
Guarding) NOTE: The 256 MB is required to enable
RAID 5, 5+0 support of the Smart Array P410i
RAID
1+0 (Striping & Mirroring)
RAID
0 (Striping)
Two HP NC382i Dual Port
Multifunction Gigabit Server Adapters
Network Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
PCI Express, four lanes
(x4)
Controller
BCM5709C
Network Transfer Rate
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex)
100 Mb/s
100Base-TX (Full-Duplex)
200 Mb/s
1000Base-TX (Half and Full-Duplex)
2000Mb/s
Connector
Two RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m)
100Base-TX
Category 5 or higher UTP;
up to 328 ft (100 m)
1000BaseTX
Category 5 or higher UTP;
up to 328 ft (100 m)
Environment-friendly Products and
Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
US Site
DL Quickspecs
Search:
381513-B21
© 2012 Canada PartsDirect