HP ProLiant Essentials Foundation
Pack, including HP Systems Insight Manager, SmartStart, Rapid Deployment Pack
Front
Panel status LEDs including system health and UID
Form Factor:
1U (1.70" / 4.32 cm) Rack Mount Chassis
24.0" (60.96
cm) Deep
Spring-loaded universal sliding rails included with all models
Warranty:
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners. Hardware
diagnostic support and repair is available for one year from date of purchase.
Support for software and initial setup is available for 90 days from date of purchase.
Expanded support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack services
or customized service agreements. SATA hard drives have a one-year warranty. NOTE: Server Warranty includes three year parts, one year labor, and one
year on-site support with next business day response. Additional information regarding
worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE: For a
brief, printer friendly data sheet that describes this product and informs
you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-7883ENW.pdf.
NOTE: For the Standard Features shipped in the "Factory Integrated
Models", please see the "Configuration Information - Factory Integrated
Models" section.
Processor One of the following depending on Model
Dual-Core Intel® Xeon®
processor 3070 (2.67 GHz, 4MB L2 Cache, 65 Watts, 1066MHz Front Side Bus
(FSB))
Cache Memory One of the following depending on Model
4MB L2 Cache NOTE: For Models with Intel®
Xeon® processor 3060 and 3070
2MB L2 Cache NOTE: For Models with the Intel®
Xeon® processor 3040 and 3050
2x2MB L2 Cache NOTE: For Models with the Intel®
Pentium-D processor 925
2x1MB L2 Cache NOTE: For Models with the Intel®
Pentium-D processor 820
2MB L2 Cache NOTE: For Models with the Intel®
Pentium-4 processor 651
512KB L2 Cache NOTE: For Models with the Intel®
Celeron-D processor 352
Chipset
Intel® 3000 Chipset
Memory Protection
ECC
Memory One
of the following depending on Model
Type
PC2-5300 (667MHz) Unbuffered
ECC DDR2 SDRAM
Interleaving optional (Enabled when DIMMs populated in pairs)
DIMM Sockets
4
Standard – Celeron D Model
512 MB (1 x 512 MB)
Standard – Xeon Models
1 GB (1 x 1 GB)
Maximum Memory
8 GB
Network Controller
Embedded NC324i
PCI Express Dual Port Gigabit server adapter
Expansion
Slots
Expansion
Slot #
Technology
Width
Connector Width*
Bus
Number**
Form Factor
Notes
1
(Standard)
PCIe
x1
x8
7
Low profile (half length, half height) slot
2
(Standard)
PCIe
x8
x8
10
Full
length, full height slot
This PCIe slot can be replaced with optional PCI-X slot below
2 (Optional)
PCI-X
(133MHz, 3.3Volt)
64-bit
Not applicable
4
Full
length, full height slot
3.3 Volt
*
Default bus assignment. Inserting cards with PCI bridges may alter the actual
bus assignment number. ** Slots are enumerated differently based on OS. MS
OS's enumerate from lowest to highest Device ID by bus (starting with the lowest
bus).
Storage Controllers
Integrated Intel® 82801GR
Serial ATA Host Controller with RAID 0/1 support.
Hot Plug SAS and SATA controllers available via PCI card option.
Storage
Diskette Drive
Optional
Floppy Drive Assembly Option Kit is available
Optical Drive
Optional
CD-ROM, DVD-ROM, & DVD-RW option kits available
Hard Drives
One of the following depending on Model
Hard Drives – Non Hot Plug SATA
Up to 2 non-hot plug SATA 3.5”
drives
Hard Drives – Hot Plug SATA/SAS
Up to 2 hot plug SATA or SAS
3.5” drives NOTE: Requires optional PCI card.
1 (rear) (Optional second video
connector in front)
Keyboard
1
Mouse
1
Network RJ-45
2
iLO 2 remote management port
1
Graphics
Integrated ATI ES1000 Video
Controller with 16 MB SDRAM Video Memory
Form Factor
Rack (1U), (1.70 in/4.45 cm),
24.0” deep
HP
Insight Control Management Suites
HP
Insight Control Environment delivers foundation management, including remote monitoring,
hardware resource deployment, health monitoring, software version control, performance
monitoring, vulnerability scanning and patch management, and power management.
HP Insight Control Environment installs and licenses the following components
by default using a wizard-based integrated installer:
HP Systems Insight
Manager
HP iLO Advanced Pack
HP Rapid Deployment Pack
HP
Insight Power Manager
HP Performance Management Pack
HP Vulnerability
and Patch Management Pack
Additional ProLiant Essentials software
and management tools included on the Insight Control Management kit can be installed
manually
HP Server Migration Pack - Universal Edition
HP Open
Service Event Manager
HP Instant Support Enterprise Edition
NOTE:
Server Migration Pack - Universal Edition can be installed from the SMP Universal
CD included in the Insight Control Management media kit. NOTE: For additional
product and licensing information about HP Insight Control Environment, visit:
http://www.hp.com/go/ice.
HP
Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery,
imaging & deployment, monitoring, and management for Linux-based ProLiant
server platforms. Built on the industry-leading HP Systems Insight Manager framework,
this solution integrates open source technology with experience leveraged from
HP's Linux products in HP ICLE and HP XC Clusters, while providing paths to the
future with developing management technologies.
HP Insight Control
management suites and most HP ProLiant Essentials include a one year of 24 x 7
HP Software Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight.
Server
Management Stand Alone Software Product - ProLiant Essentials
HP
Systems Insight Manager
HP
Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based
environment to centrally manage servers, storage and other infrastructure devices,
(both HP and non-HP) across multiple operating system platforms.
ProLiant Essentials Rapid Deployment
Pack
Rapid Deployment Pack
(RDP) extends HP Systems Insight Manager with a complete deployment solution for
HP ProLiant servers. RDP provides a central location to configure server hardware,
deploy Windows, Linux and VMware ESX operating environments and install HP ProLiant
Support Pack drivers using images and scripted profiles. For more information,
visit: http://www.hp.com/go/rdp.
ProLiant Essentials Server
Migration Pack - Universal Edition
Upgrading,
replacing, or virtualizing your existing server? Effortlessly transition to new
virtual or physical HP ProLiant servers or BladeSystem with automated, accurate
and affordable migration of OS, application and data. SMP Universal automates
the manual processes required for migrating servers between physical or virtual
platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal
allows all of the following migrations:
Performance
Management Pack (offered exclusively through the Insight Control suites) - a performance
management solution that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better utilize their
valuable resources
Integrated
Lights-Out Advanced Pack
Upgrades
the iLO 2 processor with comprehensive remote control including Virtual KVM remote
graphical console, enhanced console sharing and replay, virtual media (floppy,
CD/DVD, USB key), virtual folders, and enterprise security (directory services
and two-factor authentication).
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to: http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
Core
Infrastructure Management
SmartStart
SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at: http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart
7.51.
Insight
Management Agents
The Insight
Management Agents should be installed on all HP servers to present system instrumentation,
health and configuration information into HP Systems Insight Manager and the HP
System Management Homepage. The HP System Management Homepage aggregates systems
data from Insight Management Agents and other HP management tools, providing a
consolidated browser-based interface for managing individual servers.
Insight
Management Agents and The HP System Management Homepage are included on ProLiant
Support Packs, and can also be installed using the server profiles provided with
the ProLiant Essentials Rapid Deployment Pack.
For additional information
about the Management Agents and the HP System Management Homepage please visit
the management Web site at: http://www.hp.com/servers/manage.
Subscriber's Choice
Subscriber's
Choice Driver and Support Alerts/Notifications is a web-based email subscription
service that provides software and driver change notifications for ProLiant products.
Sign up at: http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis.
ProLiant
Support Packs and ROMPaq, software
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options, available through ProLiant Support Packs the ProLiant Essentials
Rapid Deployment Pack, SmartStart or downloaded from software and drivers download
pages website at: http://www.hp.com/go/support.
HP Serviceguard for Linux (SGLX)
HP Serviceguard
for Linux is a high availability clustering solution designed to protect
applications and services from a wide variety of software and hardware failures,
monitoring the health of each server (node) and quickly responding to failures
such as those that affect system processes, system memory, LAN media and
adapters, and application processes.
The following is a quick summary of HP Serviceguard for Linux features and
support. For the most recent list of Linux distributions & kernels,
servers and storage supported with Serviceguard for Linux, see the Serviceguard
for Linux Certification Matrix, available at: http://www.hp.com/go/sglx/info.
Supported Linux Distributions:
Red Hat EL 4
Red Hat EL 5
SUSE SLES10
Supported Server Platforms
HP Integrity
HP ProLiant
Selected 3rd party x86 class servers
Physical and virtual server support
Application Integration Toolkits
Oracle Single Instance Database
Serviceguard Extension for SAP for Linux (SGeSAP/LX)
Serviceguard for Linux Extended Distance Cluster
(XDC) extends cluster distances up to 100 km, utilizes software
RAID mirroring for data replication and is storage array independent
HP StorageWorks XP/EVA Cluster Extension Software
for Linux (CLX) works seamlessly with HP Serviceguard for Linux,
HP StorageWorks Continuous Access, and HP Disk Arrays to automate
failover and failback between sites
Software updates are distributed by HP Services
to customers with support contracts NOTE: For additional information
on HP Serviceguard for Linux, visit http://www.hp.com/go/sglx
or see the HP Serviceguard for Linux QuickSpecs.
NOTE: HP Serviceguard for Linux products
for HP ProLiant and select 3rd party x86 class servers include one year
of 24 x 7 HP Software Technical Support and Update Service ensuring rapid
access to HP support staff and proactive delivery of software updates.
For more information about this service, please visit: http://www.hp.com/services/swsupport.
Industry Standard
Compliance
ACPI 2.0
PCI 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0
IPMI 2.0 NOTE: iLO 2 management processor
monitors fans, temperature sensors, power supply sensors and Vrms without
having the System Management Driver loaded. In addition to reporting sensor
status from all iLO 2 interfaces, the management processor also reports
sensor status to the operating system through an IPMI 2.0 specified interface.
Remote
Management
Integrated
Lights Out 2 (iLO2) Standard Management:
Virtual Text Remote
Console (pre-OS only)
Remote Serial Console
Virtual Power Button
Control
Virtual Unit ID control
Integrated Remote Console
Embedded
system health
Browser, command line and scripted access
Automatic
IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets
Layer (SSL) and Secure Shell security (SSH)
OS independent hardware health
status
IML and iLO Event Logging
Support for 12 user accounts
with customizable access privilege
Intelligent
Manageability
Automatic
Server Recovery (ASR) iLO 2 Advanced Pack (optional) HP Systems Insight
Manager Integrated Management Log Drive Parameter Tracking (with Smart
Array Controllers) Dynamic Sector Repairing (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SAS hard drives, and memory) BIOS
Serial Console Front and Rear Unit ID (UID) button/LED
Security
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
USB Port control
Removable CD-ROM/Diskette Drive Assembly
Administrator's password
Server
Power Cords
One 6' Highline
(IEC-IEC) power cord ships standard
NOTE:
HP ProLiant DL320 G5 servers hip standard worldwide with a C13 to C14 2M Highline
jumper cord. Japanese models also include a 2M Lowline power cord. If customers
require a local power cord, they can check the power cord matrix for the appropriate
country specific cord. Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
Power Supply
Auto-sensing 420-Watt PFC Power
Supply, CE Mark Compliant
For
the Ultra Thin Rack Deployment Overview, including best practices for the HP ProLiant
DL320 G5, please see the following URL: www.hp.com/servers/dl320.
Microsoft Windows Server
2003 Microsoft Windows Small Business Server 2003, R2 Microsoft Windows
2008 Red Hat Enterprise Linux SUSE Linux Enterprise Server
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following
additional requirements to ensure adequate airflow and to prevent damage
to the equipment:
Front and rear doors: If your 42U server rack includes closing
front and rear doors, you must allow 5,350 sq cm (830 square inches)
of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and
the side panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty
front panel U-spaces in the rack. This arrangement ensures proper airflow.
Using a rack without blanking panels results in improper cooling that
can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation
Guide or the Documentation CD provided with the server, or to the server
documentation located in the Support section at the following URL: http://www.hp.com/servers/dl320.
Rack
Kit
The HP ProLiant
DL320 quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series)
with an adjustment range to fit a rack depth of 21.25" to 37.75".
HP
Factory Express Capabilities
HP Factory Express offers configuration, customization, integration and deployment
services for HP servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory
Express offers service packages for simple configuration, racking, installation,
complex configuration and design services as well as individual factory services,
such as image loading, asset tagging, and custom packaging. HP products supported
through Factory Express include a wide array of servers and storage: HP Integrity,
HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well
as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific
server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
Service
and Support
HP Care Pack
Services provide total care and support expertise with committed response times
designed to meet your IT and business needs.
HP Care Pack services include
coverage for the HP branded hardware options qualified for the server that are
purchased at the same time or afterward and internal to the enclosure. It also
includes the 22-inch and smaller external monitors and tower UPS options up to
3kVA. These items will be covered at the same service level and for the same coverage
period as the server. Coverage of UPS Battery is not included and standard warranty
terms & conditions apply. For servers or storage systems installed within
a rack, service also covers all HP qualified rack options installed within the
same rack.
To fully capitalizing on your HP ProLiant servers' capabilities
requires a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of support solutions
provides a range of support services designed to meet the varying needs of your
business. Whether an SMB, or large global corporation, HP has ProLiant server
support offers to help you speedily deploy and maximize system uptime.
Recommended
Service - simplify ProLiant solution implementation, maintenance, and management.
Support - 3 Year 9x5 Next Business Day coverage, excluding HP holidays
only
Deployment Service - HW Installation only
Enhanced
Service - optimize service level to increase IT performance and availability.
Support - 3 Year 13x5 Same Business Day, 4-Hour response coverage
only
Deployment Service - Installation and Start up only
Refer
to the information on the Installation of a ProLiant on the ProLiant Data Sheet;
to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
DL320
G5 C352 / 512MB 418043-001
Processor
Intel®
Celeron D processor 352 with EM64T (3.2 GHz, 86 Watts, 533MHz FSB)
Cache Memory
512KB
L2 Cache
Chipset
Intel®
3000 chipset
Memory
512
MB (Standard) to 8 GB (Maximum) of ECC PC2-5300 Unbuffered DDR2 SDRAM Memory
Network Controller
Embedded
NC324i PCI Express Dual Port Gigabit server adapter
Storage
Controller
Intel® 82801GR
Integrated Serial ATA Host Controller
Hard
Drives
None ship standard
Maximum Internal Storage
1.5TB with SATA drives, 600GB with SAS drives (SAS requires optional PCI controller)
The ProLiant Smart Buy program offers a collection
of promotional server and option products that are configured with SMB
in mind, offered at discounted prices, and positioned for quick delivery.
Smart Buy server offers are available for a limited time only.
Configuration Information - Factory Integrated Models
NOTE:
This section lists some of the steps required to configure a Factory
Integrated Model. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative
for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server
Configuration Level 1. NOTE: FIO indicates that this option only available as a Factory
Installable Option.
Step
1: Base Configuration (choose one of the following configurable models)
Models
DL320G5 CTO (Configure-To-Order)
Chassis
419405-B21
Includes:
Embedded NC324i PCI
Express Dual Port Gigabit server adapter
1 full length PCI
Express x8 slot and 1 half length low profile PCI Express x8 slot
Integrated Lights-Out
2 (iLO 2) embedded
Intel® 82801GR
Integrated Serial ATA Host Controller
Rack (1U) form factor,
(1.70 in/4.45 cm)
Spring-loaded universal
sliding rack rails
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted)
NOTE: Some options may not be factory integratable. Contact your local
sales representative for additional information.
ProLiant
DL320 G5 Unique Options
DL320 G5 PCI-X Option Kit NOTE:
The DL320 G5 ships standard with a riser board assembly that has two connectors:
Full-length PCI Express connector (x8 connector,
x8 bus speed)
Half-length PCI Express
connector (x8 connector, x1 bus speed)
The
DL320 G5 PCI-X Option Kit replaces the Full-Length PCI Express connector with
a full-length 64-bit/133MHz PCI-X connector.
419557-B21
HP
Insight Control Management Suites
NOTE: Electronic licensing
options are available for Insight Control suites software products. Please
see the appropriate Insight Control QuickSpecs for additional information.
HP Insight Control Environment
HP Insight Control Environment, No Media
1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This part number can be purchased
as a single license or as multiple licenses with a single activation key.
Customer will receive a license entitlement certificate via e-mail. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. Only available directly from
HP and select resellers in the Americas region.
452148-B22
HP Insight Control Management Software Media
Kit NOTE: Insight Control Management
DVD media without licenses. Contains Insight Manager and Essentials software
products and components licensed by Insight Control Management suites. Uses
an integrated installer to perform quick and accurate software installation
and updates.
HP Insight Control
Environment for Linux v2.0, Media pack (CD) - No licenses included NOTE: This optional Media pack CD
contains the ISO image for HP Insight Control Environment for Linux, HP
System Insight Manager, and an integrated installer. Servers must be acquired
separately. This Media pack is optional because the latest ISO image and
latest updates may be downloaded at no cost from: http://www.hp.com/go/ice-linux
(click on Download button).
464422-B21
HP Insight Control
Environment for Linux v2.0, No Media, 1-Server license, including One year
of 24x7 Technical Support and Updates NOTE: This part number can be used
to purchase one (1) license with a single activation key. Customer will
receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x
7 HP Software Technical Support and Update Service. One certificate is shipped
for each license.
Server
Management Stand Alone Software Product - ProLiant Essentials
NOTE:
Electronic licensing options are available for select ProLiant Essentials
software products. Please see the appropriate ProLiant Essentials QuickSpecs for
additional information.
Deploy
ProLiant Essentials Rapid Deployment
Pack
ProLiant Essentials Rapid Deployment Pack
No Media 1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: This license allows 1 server to be
deployed and managed via RDP. Customer will receive a printed license entitlement
certificate via physical shipment. The license entitlement certificate must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service NOTE: For
additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html
452151-B21
HP Server Migration Pack - Universal
Edition
HP
Server Migration Pack - Universal Edition, No Media, Physical / Virtual to ProLiant
Single Migration License, including 1 year of 24x7 Technical Support and Updates NOTE: This license allows 1 physical to
ProLiant or virtual to ProLiant migration. Customer will receive a printed license
entitlement certificate and documentation via physical shipment. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license
activation key(s). Includes one year of 24 x 7 HP Software Technical Support and
Update Service.
460750-B21
HP Server Migration Pack - Universal Edition,
No Media, Physical / Virtual to Virtual Single Migration License, including 1
year of 24x7 Technical Support and Updates NOTE:
This license allows 1 physical to virtual or virtual to virtual migration.
Customer will receive a printed license entitlement certificate and documentation
via physical shipment. The license entitlement certificate must be redeemed online
or via fax in order to obtain the license activation key(s). Includes one year
of 24 x 7 HP Software Technical Support and Update Service.
460753-B21
HP Server Migration Pack - Universal Edition,
No Media, 1-Year Unlimited Migration License, including 1 year of 24x7 Technical
Support NOTE: This license allows
unlimited migrations (physical to ProLiant, physical to virtual, virtual to virtual,
and virtual to ProLiant) for one year. Customer will receive a printed license
entitlement certificate and documentation via physical shipment. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license
activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
ProLiant
Essentials Virtual Machine Management Pack, No Media, 1-Server License, including
1 year of 24x7 Technical Support and Updates NOTE:
Customer will receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service. NOTE: For additional License Kits,
please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12328_na/12328_na.html
452153-B21
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to: http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials QuickSpecs for more information.
1024
MB Unbuffered ECC PC2-5300 DDR2 (1 x 1024 MB)
432804-S21
512 MB Unbuffered ECC PC2-5300 DDR2 (1 x 512 MB)
432803-S21
Floppy Drive Bay Options
Floppy Drive Assembly Option Kit
372702-B21
DL320 G5 Front VGA Connector NOTE: The Front VGA Connector is
installed in the floppy drive bay. You cannot install both a Floppy Drive
and a Front VGA Connector.
NOTE: Serial Attached
SCSI - SAS Hard Drives are only supported with optional SAS HBA or RAID
cards.
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications
such as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature: http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
NOTE:
Serial ATA hot-plug capability
and drive LEDs are not supported by the DL320 G5 embedded SATA storage controller.
NOTE: SATA drives have a 1 year warranty. Please see the Hard Drive
QuickSpecs for Technical Specifications such as capacity, height, width,
interface, transfer rate, seek time, physical configuration, and operating
temperature: http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html
Storage Controllers
SAS
Controllers
Smart Array E200 Controller NOTE: The HP Smart Array E200 Controllers
require the purchase of the DL320 SAS/SATA Hot Plug Cable option kit ( 398307-B21).
Smart
Array P400 Controller NOTE:
The HP Smart Array P400 Controllers require the purchase of the DL320 SAS/SATA
Hot Plug Cable option kit ( 398307-B21).
Smart
Array P400 Battery Attach Kit NOTE: This
option kit contains a 24" battery cable and adhesive material for installing a
battery into the server if a Smart Array P400 is integrated outside of the factory.
For all solutions, please refer to the server QuickSpecs and User's Manual for
detailed installation instructions.
HP
8 Internal Port SAS HBA with RAID NOTE:
The HP SC44Ge HBA and HP 8 Internal Port SAS HBA with RAID require the purchase
of the DL320 SAS/SATA Hot Plug Cable option kit ( 398307-B21).
NOTE: The NC-series
network adapters listed above can be used with the integrated NC324i network
adapter for ProLiant Teaming and the ProLiant Essentials Intelligent Network
Pack applications.
For recommended tape drive offerings for this ProLiant server see the following:
USB
Tape Drives
HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 160 USB Tape Drive
AG703A
SAS
Tape Drives NOTE: : For the DL320
G5, HP recommends purchasing the HP SC44Ge HBA ( 416096-B21) for a dedicated SAS
HBA for tape.
HP
StorageWorks DAT 160 SAS Internal Tape Drive NOTE:
HP recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A)
for a complete rack-mount solution.
Q1587A
HP StorageWorks LTO-2 Ultrium
448 SAS Internal Tape Drive NOTE: HP
recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A) for
a complete rack-mount solution.
DW085A
HP
StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive NOTE:
HP recommends combining this tape drive with the 1U SAS Rack-Mount kit (AE459A)
for a complete rack-mount solution.
EH847A
HP
StorageWorks 1U SAS Rack-mount kit with one LTO-4 Ultrium 1760
EH946A
NOTE: Please
refer to the "Tape Drives, Tape Autoloaders & Tape Libraries" table in the
Storage section of this document for a list of SAS controllers with tape support.
SCSI Tape Drives
NOTE:
For the DL320 G5, HP recommends purchasing the HP SC11Xe HBA ( 412911-B21) for
a dedicated SCSI HBA for tape.
HP StorageWorks LTO-1 Ultrium
232 Internal Tape Drive (Carbonite) NOTE:
HP recommends combining this tape drive with the 1U SCSI Rack-Mount kit ( A7445B)
for a complete rack-mount solution.
For
an up-to-date listing of the latest O/S and software support details for HP Ultrium
tape drives, please visit: http://www.hp.com/go/connect.
Rack-Mount Tape Drive Enclosures
HP StorageWorks 1U SCSI Rack-Mount
kit NOTE: The 1U Rack-Mount Kit can
support up to (2) half-height tape drives and is compatible with multiple Single-Ended
and LVD SCSI tape drives including the DAT 40, DAT 72, DAT 160, DLT VS160, LTO-1
Ultrium 232, LTO-2 Ultrium 448 and LTO-3 Ultrium 920 tape drives.
HP
StorageWorks 1U USB Rack-Mount Kit NOTE:
The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives and is
compatible with the DAT 40 USB, DAT 72 USB and DAT 160 USB tape drives.
HP
StorageWorks 1U SAS Rack-Mount Kit NOTE:
The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives and
is compatible with the LTO-2 Ultrium 448 SAS, LTO-3 Ultrium 920 SAS tape drives.
HP
StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
AK377A
HP StorageWorks 1/8 G2 LTO-3 Ultrium
920 Tape Autoloader
AH165A
HP StorageWorks 1/8 G2 LTO-3 Ultrium
920 SAS Autoloader
AH558A
HP StorageWorks 1/8 G2 LTO-2 Ultrium
448 Tape Autoloader
AH164A
HP StorageWorks 1/8 G2 LTO-1 Ultrium
232 Tape Autoloader
AH163A
HP
StorageWorks 1/8 G2 Tape Autoloader Rack Kit NOTE:
Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack; includes
rails and rackmount instructions
AH166A
NOTE:
Please reference the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference current
compatibility information at: http://www.hp.com/go/ebs.
Tape
Libraries
HP StorageWorks
MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1840 SCSI Drive Library
AJ033A
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1840 4GB FC Library
AJ034A
HP
StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library
AK378A
HP StorageWorks MSL2024
1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-4
Ultrium 1840 SCSI Drive Library
AJ035A
HP StorageWorks MSL4048 1 LTO-4
Ultrium 1840 4GB FC Library
AJ036A
HP
StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library
AK380A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 960 SCSI Drive Library
AG322A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 960 4GB FC Library
AG324B
HP StorageWorks MSL4048 1 LTO-3
Ultrium 920 SAS Drive Library
AH560A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 920 SCSI Drive Library
AH171A
HP
StorageWorks MSL4048 1 LTO-2 Ultrium 448 SCSI Drive Library
AG320A
NOTE: Please
reference the MSL Tape Library QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference current
compatibility information at: http://www.hp.com/go/ebs.
HP StorageWorks Modular Smart Array 20
HP
StorageWorks Modular Smart Array 20 NOTE:
Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant
power supplies.
HP Serviceguard Linux x86 Server
License & Media including One Year 24x7 Software Support & Updates
463831-B21
HP Serviceguard Linux Oracle Single
Instance Database Toolkit x86 Cluster License & Media including One
Year 24x7 Software Support & Updates
463833-B21
HP Serviceguard Linux Extension
for SAP (SGeSAP/LX) x86 Server License & Media including One Year 24x7
Software Support & Updates
463834-B21
HP Serviceguard Linux Extended
Distance Cluster (XDC) x86 Server License & Media including One Year
24x7 Software Support & Updates
463835-B21
NOTE: For a detailed
list of supported configuration/certification options for HP Serviceguard
for Linux please refer to the HP Serviceguard for Linux Certification Matrix
at: http://www.hp.com/go/sglx/info NOTE: HP Serviceguard for Linux products running on x86 platforms
now include one year of 24 x 7 Software Technical Support and Updates. Please
see the Support Information section of the HP Serviceguard for Linux QuickSpecs
for details. NOTE: For additional information including a complete list of Product
Numbers for HP Serviceguard for Linux, please see the following QuickSpecs
at: http://h18000.www1.hp.com/products/quickspecs/11518_na/11518_na.html
Rack Adapter Kit NOTE: This kit allows HP rack servers
to fit in racks that are 24" wide.
332815-B21
1U Cable Management Arm NOTE: Package contains two cable management arms.
365403-B21
NOTE: Telco Rack
Support - Support for all 2-post Telco racks requires the use of the standard
rack kit and an additional option kit from Rack Solutions: http://www.racksolutions.com/hp
NOTE:
xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by
custom systems, VARs and Channels). NOTE: It is mandatory to use a
shock pallet in order to ship racks with equipment installed.
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables can
be found at the following URL: http://www.hp.com/go/kvm.
NOTE:
For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following
URL: http://www.hp.com/go/kvm.
NOTE:
Cat5e cables are required to connect Serial Adapters to Serial Console Servers.
Additional Serial Adapters and Cat5e cables can be found at the following URL:
http://www.hp.com/go/kvm.
NOTE:
For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following
URL: http://www.hp.com/go/kvm.
Service and Support Offerings (HP Care Pack Services)
Hardware
Services On-site Service
Next Business Day On-site Service,
5-Day x 9-Hour Coverage, 3 Years, Electronic
U4479E
4-Hour
On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
U4480E
4-Hour
On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4481E
6-Hour
Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4482E
Installation
& Start-up Services
Hardware Installation, Electronic
U4490E
Installation
& Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer
Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays, Electronic
U4491E
Support
Plus
Onsite
HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, Electronic
U4492E
Support
Plus 24
Onsite
HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
U4493E
Onsite
HW support 24x7, 4hr response and SuSE Linux SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic.
U6309E
Onsite
HW support 24x7, 4hr response and Red Hat ES Linux SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic.
Standard Memory
512 MB installed (1 x 512 MB SDRAM DIMM) on Celeron D model.
1 GB (1 x 1 GB SDRAM DIMMs) on all Xeon models.
Standard Memory Plus Optional Memory
Up to 8 GB memory is available with the optional installation of PC2-5300
ECC DDR2 SDRAM Memory kits.
NOTE:
The chart below does not represent all possible configurations. For best
performance, HP recommends dual-bank interleaved mode configurations. For
dual-bank interleaved mode, DIMMs must be installed in both banks with equal
bank capacities.
Floppy Drive Bay: Optional Floppy Drive Assembly Option Kit or Optional Front
VGA Connector
B
Optical Drive Bay: Optional
CD, CDRW/DVD, or DVD-RW drive
Drive Support
Quantity
Supported
Position
Supported
Controller
Removable Media
Floppy Drive Assembly
Option Kit
Up
to 1
A
Integrated
Front VGA Connector
Up to 1
A
Integrated
Low-profile IDE (ATAPI) CD-ROM
Drive
Up
to 1
B
Integrated
IDE (ATAPI)
Low-profile
IDE DVD-ROM or DVD-RW Drive
Up to 1
B
Integrated
IDE
SAS
Hard Drives
Quantity
Supported
Position
Supported
Controller
HP 300GB 3G SAS
15K SP HP 300 GB 3 G SAS 15K DP HP 146 GB 3 G SAS 15K SP HP 146 GB
3 G SAS 15K DP HP 72 GB 3 G SAS 15K SP
HP 72 GB 3 G SAS 15K DP
Up
to 2
1-2
HP
8 Internal Port SAS HBA with RAID HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256 Controller HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller HP Smart Array P800/512 BBWC Controller
Serial ATA Hard Drives
Quantity Supported
Position Supported
Controller
HP 750GB 1.5G SATA 7.2K HP 500GB 1.5G SATA 7.2K HP 250GB 1.5G SATA 7.2K
HP 160GB 1.5G SATA 7.2K HP 80GB 1.5G SATA 7.2K
Up to 2
1-2
HP
embedded 2 Port SATA Controller with RAID 0/1 support HP 8 Internal Port SAS
HBA with RAID HP Smart Array E200/128 BBWC Controller HP Smart Array E500/256
Controller HP Smart Array P400/256MB Controller HP Smart Array P400/512MB
BBWC Controller HP Smart Array P800/512 BBWC Controller
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
Modular
Smart Array 20
Please see the Modular Smart Array 20 QuickSpecs to determine
configuration requirements
External
Please
see the Modular Smart Array 1000 QuickSpecs for the latest list of supported HBAs:
http://www.hp.com/go/MSA20
NOTE:
SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller
using split cable (supplied with tape drive) deactivates 1 of the hard drive bays.
Actual hard drive bay deactivated depends on where split cable plugs into SAS
drive connector. Example: 3x SAS cable connector plugged into SAS drive connector
(5-8) on the back of the hard drive cage would mean drive bay 8 is deactivated.
Position
Supported
Controller
Controller Part Number
HP StorageWorks SCSI Tape Drives, External LTO-1 Ultrium 232 LTO-2
Ultrium 448 LTO-2 Ultrium 460 LTO-3 Ultrium 960 LTO-3 Ultrium 920 LTO-4
Ultrium 1840 DAT 40 DAT 72 DAT 160 DLT VS160 SDLT 600 1U Rack-Mount
Kit 3U Rack-Mount Kit
HP
StorageWorks USB Tape Drives, External DAT 40 USB DAT 72 USB
DAT 160 USB 1U USB Rack-Mount Kit
External
USB 2.0 Port
N/A
HP
StorageWorks SAS Tape Drives, External DAT 160 SAS LTO-2 Ultrium 448
SAS LTO-3 Ultrium 920 SAS LTO-4 Ultrium 1840 SAS 1U Rack-Mount Kit 3U
Rack-Mount Kit
- Click on the system of interest. Example: DL320 G5 - Follow the instructions
of the next screens.
Power Supply Output (per power supply)
Rated Steady-State Power
420 W (at 100 VAC), 420 W (at 200 VAC)
Maximum
Peak Power
420 W (at 100 VAC),
420 W (at 200 VAC)
System
Inlet Temperature
Operating
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault
or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative
Humidity (non-condensing)
Operating
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared average
bystander position A-Weighted sound pressure levels (LpAm) when the product is
operating in a 23°C ambient environment. Noise emissions were measured in
accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA
109).
Supports multiple logical
volumes
Setup through ROM based Array Configuration Utility
Installation scripting support NOTE: This controller does not support
Hot Plug functions or LED functions.
RAID OS Support
Microsoft Windows Server
2003 NOTE: In order to implement integrated
SATA RAID with Smart Start 7.4 on Windows 2000/2003, the use of a floppy
drive is necessary.
Linux (Red Hat, SuSE, UnitedLinux)
Embedded NC324i PCI Express Dual Port NIC
Network
Interface
10Base-T/ 100Base-TX/
1000Base-TX
Compatibility
IEEE
802.3 10Base-T
IEEE
802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
Four
lane (x4), 100MHz PCI Express Reference Clock
Network
Transfer Rate
10Base-T (Half-Duplex)
10
Mb/s
10Base-T (Full-Duplex)
20
Mb/s
100Base-TX (Half-Duplex)
100
Mb/s
100Base-TX (Full-Duplex)
200
Mb/s
1000Base-TX (Half
and Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories
3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category
5 UTP; up to 328 ft (100 m)
Environment-friendly Products and Approach
End-of-life
Management and Recycling
Hewlett-Packard
offers end-of-life HP product return, trade-in, and recycling programs in many
geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
US Site
DL Quickspecs
Search:
432806-B21
© 2012 Canada PartsDirect